Page 1
M
Model:
Grand Kingfisher
odification
B
Date:
ulletin
31-Dec-97
No:
PAGE: 1/1
1
Modified Article:
From:
Reason for
Modification:
Please correct your parts catalog as follows.
Page 28
The illustration for item no.3 was incorrect.
QAC Field Information Dept.
Parts Catalog
Parts catalog correction
To facilitate assembly
Part Standardization
OLD NEW
Prepared by:
Vendor change
To improve reliability
Other
M. Inohana
To meet standards
( )
Page 2
M
Model:
Grand Kingfisher
odification
B
Date:
ulletin
31-Dec-97
No:
PAGE: 1/1
2
Modified Article:
From:
Reason for
Modification:
Please change the call out numbers in the illustration as shown.
Page 6
QAC Field Information Dept.
Parts Catalog
Parts catalog correction
To facilitate assembly
Part Standardization
Vendor change
To improve reliability
Other
Prepared by:
M. Inohana
To meet standards
( )
Page 3
M
Model:
Grand Kingfisher
odification
B
Date:
ulletin
30-Jun-98
No:
PAGE: 1/2
3
Modified Article:
From:
Reason for
Modification:
A new model "Tequila (A289)" designed for the Latin American market will be launched in
September 98. Tequila is a minor change product of the already existing model "Grand
Kingfisher (A245 or RICOH FT4018/Gestetner 2718z)", especially designed to meet the
needs for the Latin American market. There will be two destination codes depending on
the input voltage. -14 is for 120V, and -24 is for 220V area. This MB will explain the
information that should be added to the Grand Kingfisher (A245) Parts Catalog to properly
service the Tequila (A289) in the field.
Basic Information
1. Paper Tray
QAC Field Information Dept.
• The Upper Tray is equipped with a paper tray assembly of the LT version.
• The Lower Tray is equipped with a paper tray assembly of the A4 version.
Parts Catalog
Parts catalog correction
To facilitate assembly
Part standardization Other (Release of Tequila)
Vendor change
To improve reliability
Prepared by:
To meet standards
J. Kasamoto
2. Toner Bottle Holder Unit
• For Tequila, A2193034 (Toner Supply Unit - 230V) is used for all models.
Page 7
1. Description change
Part Old New Index
Number Description Description
A2196070 Front Cover Ass'y (NRG) Front Cover Ass'y (NRG/LAD) 1
2. Newly added
Part Description Index
Number
A2891450 Operation Pan el Ass 'y - LAD 11
Page 11
Newly added
Part Description Index
Number
A2891450 Operation Pan el Ass 'y - LAD *
A2891465 Operation Panel Co ver - LAD 1
A2891461 Indication Sheet - LAD 2
A2891463 Operation Panel Sh eet - LAD 3
A2891464 Operation Pan el Bo ard - LAD 8
Page 4
M
Model:
Page 13
Newly added
Page 29
Description change
Page 45
Newly added
Grand Kingfisher
Part Description Index
Number
A2892693 Decal Paper Tray Operation - LAD 3
Part Old New Index
Number Description Description
A2193034 Toner Supply Unit - 230V (RIC-EU) Toner Supply Unit - 230V (RIC-EU/LAD) *
A2193411 Toner Supply Unit Case - (RIC-EU) Toner Supply Unit Case - (RIC-EU/LAD) 9
odification
B
Date:
ulletin
30-Jun-98
No:
3
PAGE: 2/2
Part Description Index
Number
A2895120 Main Control Board - LAD 120V 6
A2895100 Main Control Board - LAD 220V 6
Page 53
Newly added
Part Description Index
Number
A2895120 Main Control Board - LAD 120V *
A2895100 Main Control Board - LAD 220V *
A2895104 IC - UVEPROM 1M X8 120N (LAD) 5
Page 55
Newly added
Part Description Index
Number
A2892693 Decal Paper Tray Operation - LAD 9
Page 5
M
Model:
Grand Kingfisher
odification
B
Date:
ulletin
15-Jul-98
No:
PAGE: 1/1
4
Modified Article:
From:
Reason for
Modification:
Please correct your parts catalog as follows.
QAC Field Information Dept.
Old part New part Description Page Index
number number
A190 5335 A190 5347 DC Power Harness 47 19
Parts Catalog
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
J. Kasamoto
To meet standards
( )
Page 6
RICOH Modification
Bulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
The part number and its description on page 11, index 8 were wrong. So please correct
them as shown below.
-Wrong-
-Correct-
Grand Kingfisher
Operation Panel Board
GTSS Field Information Dept
Parts catalog correction
To facilitate assembly
Part standardization
Part No. Description
A2191464 Operation Panel Board
Part No. Description Qty Int Page Index Note
A2191464 Operation Panel Board – 120V 11 8
A2191468 Operation Panel Board – 230V 11 8
Date:
Vendor change
To improve reliability
Other
15-Feb-99
Prepared by:
No.:
5
M. Ishihara
To meet standards
( )
Page 7
M
odification
B
ulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
The previous filter (A1901812) may become frosted when a drop of water sticks to it.
Therefore the material of the filter has been changed from CM500S (A1901812) to CF-50F
(A1901805). The vendor has been changed as well.
Grand Kingfisher / Tequila
Blue filter
GTSS Field Information Dept
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A1901812 A1901805 Blue Filter 1-1 X/O 25 5
New part
number
Description Qty Int Page Index Note
Date:
Vendor change
To improve reliability
Other
15-Mar-99
Prepared by:
No.:
6
M. Ishihara
To meet standards
( )
Page 8
M
odification
B
ulletin
PAGE: 2/2
Model:
MODEL NAME V/ Hz DESTINATION RAI PRODUCTION
Gestetner 2718Z
Nashuatec 3718
Savin 9118
Savin 9118 120/60 U.S.A., Canada A245 – 15 --Ricoh FT 4018
Gestetner 2718Z
Nashuatec 3718Z
Rex Rotary
8718Z
Infotec 5181Z 220,230,240/
Ricoh FT 4018 220,230,240 /
Ricoh FT4018 220,230,240/
Ricoh FT4018 220,230,240/
Ricoh FT4118
Gestetner 2818Z
Ricoh FT4118
Gestetner 2818Z
Grand Kingfisher / Tequila
120/60
120/60
220,230,240 /
50,60
50,60
50,60
50,60
50,60
120/60 Latin America A289 – 14
220,230/50,60 Latin America A289 – 24 ---
U.S.A., Canada A245 – 10
U.S.A., Canada,
Taiwan
Europe, Asia,
Latin America,
M.East,Africa,etc.
Europe A245 – 26
Europe, M. East,
Africa, Latin
America
Asia, CIS etc. A245 – 29
China A245 – 39
Date:
15-Mar-99
CODE SERIAL NO.
A245 – 17
A245 – 22
A245 – 27
No.:
AN88870001
A7628870289
AO18870001
3P98780001
A7628870001
A7628880656
A7628880366
A7938860001
6
∼
∼
∼
∼
∼
∼
∼
∼
Page 9
Modification
Bulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
The vendor of the switch has been changed and #1525220 can no longer be procured.
However, the old switches (A1525220) still in stock can still be used.
Grand Kingfisher / Tequila
Main Switch
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A1525220 A1905222 Main Switch 1-1 X/O 45 4
New part
number
Description Q’ty Int Page Index Note
Date:
Vendor change
To improve reliability
Other
30-Jun-99
Prepared by:
No.:
MA245007
M. Ishihara
To meet standards
( )
Page 10
Modification
Bulletin
PAGE: 2/2
Model:
MODEL NAME V/ Hz DESTINATION RAI PRODUCTION
Gestetner 2718Z
Nashuatec 3718
Savin 9118
Savin 9118 120/60 U.S.A., Canada A245 – 15
Ricoh FT 4018
Gestetner 2718Z
Nashuatec 3718Z
Rex Rotary 8718Z
Infotec 5181Z 220,230,240
Ricoh FT 4018 220,230,240
Ricoh FT4018 220,230,240
Ricoh FT4018 220,230,240
Ricoh FT4118,
Gestetner 2817Z
Ricoh FT4118,
Gestetner 2818Z
Grand Kingfisher / Tequila
120/60
120/60
220,230,240
/ 50,60
/ 50,60
/ 50,60
/ 50,60
/ 50,60
120/60 Latin America A289 – 14 A7938890188
220,230/50,60Latin America A289 – 24 A7938890001
U.S.A., Canada A245 – 10 AN88890001
U.S.A., Canada,
Taiwan
Europe, Asia,
Latin America,
M.East,Africa,etc.
Europe A245 – 26 3P98980001
Europe, M. East,
Africa, Latin
America
Asia, CIS etc. A245 – 29 A7628890272
China A245 – 39 A7628890239
Date:
30-Jun-99
CODE SERIAL NO.
A245 – 17
A245 – 22 AO8890001
A245 – 27 A7628890001
No.:
MA245007
Page 11
RICOH Modification
Bulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
part number
Please correct the part numbers as shown above.
Grand Kingfisher/Tequila
Agitator
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Incorrect
A190 3112 A190 3116 1st Agitator 1 33 5
A190 3116 A190 3112 2nd Agitator 1 33 7
Correct part
number
Description Q’ty Int Page Index Note
Date:
Vendor change
To improve reliability
Other
15-Aug-99
Prepared by:
No.:
M. Ishihara
To meet standards
( )
MA245008
Page 12
RICOH Modification
Bulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
AW020075 AW020086 Photinterrrupter 1-1 X/O 47 9
Grand Kingfisher
Exit Sensor
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
Description Q’ty Int Page Index Note
Date:
15-Oct-99
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245009
M. Ishihara
To meet standards
( )
There is a possibility of damage to the previous photointerrupter due to high temperature.
So a new photointerrupter with a higher heat tolerance is now used as an exit sensor.
The previous sensors (AW020075) in the other devices, such as the optics section, remain
unchanged.
MODEL NAME V/ Hz DESTINATION RAI PRODUCTION
CODE SERIAL NO.
Gestetner 2718Z
Nashuatec 3718
Savin 9118
Savin 9118 120/60 U.S.A., Canada A245 – 15 9A9990xxxx
Ricoh FT 4018
Gestetner 2718Z
Nashuatec 3718Z
Rex Rotary
8718Z
Infotec 5181Z 220,230,240/
Ricoh FT 4018 220,230,240 /
Ricoh FT4018 220,230,240/
Ricoh FT4018 220,230,240/
120/60
120/60
220,230,240 /
50,60
50,60
50,60
50,60
50,60
U.S.A., Canada A245 – 10 AN8990xxxx
U.S.A., Canada,
Taiwan
Europe, Asia,
Latin America,
M.East,Africa,etc.
Europe A245 – 26 3P9909xxxx
Europe, M. East,
Africa, Latin America
Asia, CIS etc. A245 – 29 A762990xxxx
China A245 – 39 A762990xxxx
A245 – 17 A762990xxxx
A245 – 22 A01990xxxx
A245 – 27 A762990xxxx
Page 13
RICOH Modification
Bulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
AW020075 AW020086 Photinterrrupter 1-1 X/O 47 9
Tequila
Exit Sensor
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
Description Q’ty Int Page Index Note
Date:
15-Oct-99
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA289001
M. Ishihara
To meet standards
( )
There is a possibility of damage to the previous photointerrupter due to high temperature.
So a new photointerrupter with a higher heat tolerance is now used as an exit sensor.
The previous sensors (AW020075) used in the other devices, such as the optics section,
remain unchanged.
MODEL NAME V/ Hz DESTINATION RAI PRODUCTION
CODE SERIAL NO.
Ricoh FT4118,
Gestetner 2817Z
Ricoh FT4118,
Gestetner 2818Z
120/60 Latin America A289 – 14 A7939890051
220,230/50,60 Latin America A289 – 24 A7939890001
Page 14
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Thermofuse
Parts catalog correction
To facilitate assembly
Part standardization
Date:
05-Sep-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245010
M. Ishihara
To meet standards
( )
Due to a vendor change, a 172°C thermofuse will be supplied instead of the 169°C type.
When attaching the new thermofuse, be sure to remove the old decal (169°C type).
Note: The opening temperature of the thermofuse (169°C) is unchanged.
Old part
number
A2194123 Thermofuse-169°C
New part
Description Q’ty Int Page Index Note
number
A2984123 Thermofuse-172°C
1-1 O/O 37 10
Page 15
odification Bulletin
M
PAGE: 1/1
Model:
Tequila
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Thermofuse
Parts catalog correction
To facilitate assembly
Part standardization
Date:
05-Sep-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA289002
M.Ishihara
To meet standards
( )
Due to a vendor change, a 172°C thermofuse will be supplied instead of the 169°C type.
When attaching the new thermofuse, be sure to remove the old decal (169°C type).
Note: The opening temperature of the thermofuse (169°C) is unchanged.
Old part
number
A2194123 Thermofuse-169°C
New part
Description Q’ty Int Page Index Note
number
A2984123 Thermofuse-172°C
1-1 O/O 37 10
Page 16
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Exhaust Fan Motor
Parts catalog correction
To facilitate assembly
Part standardization
Date:
07-Sep-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
M.Ishihara
To meet standards
( )
Due to a vendor change, the following parts have been changed. They are
interchangeable, so the old parts can be used as well.
Old part
number
A1845225 A2715225 Exhaust Fan Motor-DC24V306W 1-1 O/O 45 14
A1341071 A2981071 Lift Grip Plate 4-4 O/O 49 1
G0201187 A2981187 Timing Belt-S2M 158MM 1-1 O/O 41 31
A1531354 A2981354 Hinge Pin 2-2 O/O 7 4
G0202741 A2982741 Upper Registration Roller 1-1 O/O 21 11
A1904071 A2984071 Fusing Entrance Guide 1-1 O/O 37 23
New part
number
Description Q’ty Int Page Index Note
MA245011
Page 17
odification Bulletin
M
PAGE: 1/1
Model:
Tequila
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Exhaust Fan Motor
Parts catalog correction
To facilitate assembly
Part standardization
Date:
07-Sep-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
M.Ishihara
To meet standards
( )
Due to a vendor change, the following parts have been changed. They are
interchangeable, so the old parts can be used as well.
Old part
number
A1845225 A2715225 Exhaust Fan Motor-DC24V306W 1-1 O/O 45 14
A1341071 A2981071 Lift Grip Plate 4-4 O/O 49 1
G0201187 A2981187 Timing Belt-S2M 158MM 1-1 O/O 41 31
A1531354 A2981354 Hinge Pin 2-2 O/O 7 4
G0202741 A2982741 Upper Registration Roller 1-1 O/O 21 11
A1904071 A2984071 Fusing Entrance Guide 1-1 O/O 37 23
New part
number
Description Q’ty Int Page Index Note
MA289003
Page 18
odification Bulletin
M
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Grand Kingfisher
Platen Cover Hinge Ass’y
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A1931246 A1931248 Platen Cover Hinge Ass’y 1-1 X/O 9 4
New part
number
Description Q’ty Int Page Index Note
Date:
11-Sep-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245012
M.Ishihara
To meet standards
( )
Oil has been applied to the spring of the platen cover hinge. However the oil will vaporize
after some time. So grease has been applied instead of oil, but the part itself remains
unchanged.
Page 19
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Recycle Roller Bushing
Parts catalog correction
To facilitate assembly
Part standardization
Date:
17-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
Please correct your parts catalog as shown below.
Old part
number
A1903569 Recycle Roller Bushing 2 33
A1903563 Toner Recycle Roller 1 33
New part
number
Description Q’ty Int Page Index Note
No.:
MA245013
M.Ishihara
To meet standards
( )
3
4
Page 20
odification Bulletin
M
PAGE: 1/1
Model:
Tequila
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Recycle Roller Bushing
Parts catalog correction
To facilitate assembly
Part standardization
Date:
17-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
Please correct your parts catalog as shown below.
Old part
number
A1903569 Recycle Roller Bushing 2 33
A1903563 Toner Recycle Roller 1 33
New part
number
Description Q’ty Int Page Index Note
No.:
MA289004
M.Ishihara
To meet standards
( )
3
4
Page 21
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Magnetic Catch
Parts catalog correction
To facilitate assembly
Part standardization
Date:
23-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245014
M.Ishihara
To meet standards
( )
For parts standardization, the following magnetic catch has been arranged. The old part
can be used as well.
Old part
number
AG070009 A2984189 Magnetic Catch 1-1 O/O 39
New part
number
Description Q’ty Int Page Index Note
11
Page 22
odification Bulletin
M
PAGE: 1/1
Model:
Tequila
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Magnetic Catch
Parts catalog correction
To facilitate assembly
Part standardization
Date:
23-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA289005
M.Ishihara
To meet standards
( )
For parts standardization, the following magnetic catch has been arranged. The old part
can be used as well.
Old part
number
AG070009 A2984189 Magnetic Catch 1-1 O/O 39
New part
number
Description Q’ty Int Page Index Note
11
Page 23
odification Bulletin
M
PAGE: 1/1
Model:
Tequila
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
- A2981684 Shading Seal 0-1 25 24 New
Shading Seal
Parts catalog correction
To facilitate assembly
Part standardization
New part
number
Description Q’ty Int Page Index Note
Date:
23-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA289006
M. Ishihara
To meet standards
( )
A shading seal has been attached to the lens carriage (A1901682) as shown below, to
ensure proper image density at the leading edge (when making copies with very light /
halftone originals).
Lens Carriage (A1901682)
B
A
Adhesive portion
Shading Seal (A2981684)
RAI (China) Production
MODEL NAME V/ Hz DESTINATION CODE SERIAL NO.
Ricoh FT4118,
Gestetner 2817Z
Ricoh FT4118,
Gestetner 2818Z
120/60 Latin America A289 – 14 A7930870001
220,230/50,60 Latin America A289 – 24 A7930880201
Page 24
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Fan Motor-DC24V4.32W
Parts catalog correction
To facilitate assembly
Part standardization
Date:
25-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245015
M.Ishihara
To meet standards
( )
To facilitate assembling at the factory, a cable tightener has been added to the new motor.
The old motor can be used in the field as well.
Old part
number
A2715225 A2985238 Fan Motor-DC24V4.32W 1-1 O/O 45
New part
number
Description Q’ty Int Page Index Note
14
MB
MA24
5011
See MB MA245011
Page 25
odification Bulletin
M
PAGE: 1/1
Model:
Tequila
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Fan Motor-DC24V4.32W
Parts catalog correction
To facilitate assembly
Part standardization
Date:
25-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA289007
M.Ishihara
To meet standards
( )
To facilitate assembling at the factory, a cable tightener has been added to the new motor.
The old motor can be used in the field as well.
Old part
number
A2715225 A2985238 Fan Motor-DC24V4.32W 1-1 O/O 45
New part
number
Description Q’ty Int Page Index Note
14
MB
MA28
9003
See MB MA289003
Page 26
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Imaging Unit
Parts catalog correction
To facilitate assembly
Part standardization
Date:
13-Feb-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245016
M.Ishihara
To meet standards
( )
To facilitate assembly at the factory, the diameter of the drum flange has been changed
from 28.5 +0.08/+0.03mm to 28.5+0.1/+0.05mm. It is assembled by the press-in method.
The old one can be used in the field as well.
Old part
number
A2192205 A2192206 Imaging Unit 1-1 O/O 31
New part
number
Description Q’ty Int Page Index Note
*
Page 27
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Platen Cover
Parts catalog correction
To facilitate assembly
Part standardization
Date:
11-Oct-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245017
M.Ishihara
To meet standards
( )
The Platen Cover has been discontinued at the vendor side and replaced with the
following new one from a different vendor:
Old part
number
A2191391 A2981391 Platen Cover 1-1 O/O 9
New part
number
Description Q’ty Int Page Index Note
1
Page 28
odification Bulletin
M
PAGE: 1/1
Model:
Grand Kingfisher
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Seal
Parts catalog correction
To facilitate assembly
Part standardization
Date:
11-Oct-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA245018
M.Ishihara
To meet standards
( )
The Seal has been discontinued from production at the vendor side, and has been
replaced with the Upper and Lower Seals of a different vendor.
Note: The old seals currently in stock in the field can still be used, as the
interchangeability for this modification is 0/0.
Old part
number
A1904088 Seal 1-0 37
New part
Description Q’ty Int Page Index Note
number
A1904093 Upper Seal 0-1 37
A1904094 Lower Seal 0-1 37
27
27
27
Page 29
odification Bulletin
M
PAGE: 1/1
Model:
Tequila
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Imaging Unit
Parts catalog correction
To facilitate assembly
Part standardization
Date:
13-Feb-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA289008
M.Ishihara
To meet standards
( )
To facilitate assembly at the factory, the diameter of the drum flange has been changed
from 28.5 +0.08/+0.03mm to 28.5+0.1/+0.05mm. It is assembled by the press-in method.
The old one can be used in the field as well.
Old part
number
A2192205 A2192206 Imaging Unit 1-1 O/O 31
New part
number
Description Q’ty Int Page Index Note
*
Page 30
odification Bulletin
M
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Tequila
DC Motor-3.36W
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2983371 A2983381 DC Motor-3.36W 1-1 X/O 47
- A2983388 Worm Gear 0-1 47
New part
number
Description Q’ty Int Page Index Note
Date:
12-Apr-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA289009
M.Ishihara
To meet standards
( )
30
34
New
The material of the worm gear, a component part of the DC Motor (Toner Supply Motor),
has been modified to increase its durability. In addition, grease designed for plastic
materials has been applied to the gear. In accordance with this change, the P/N for the DC
Motor has been changed. In addition, the worm gear has been newly registered as a
service part.
When replacing the worm gear in the field with this new one, field engineers must apply
grease designed for plastic materials to the tip and spiral threads of the worm gear. The
recommended greases are as follows:
In addition to Cosmos No.1 grease (used for production units), the following are available
as Service Parts:
A1909002 Grease-CP501(5pcs/set)
52039502 Grease-501
RAI (China) Production
MODEL NAME V/Hz DESTINATION CODE SERIAL NUMBER
Ricoh FT4118,
Gestetner 2817Z
Ricoh FT4118,
Gestetner 2818Z
120/60 Latin America A289 – 14
220,230/50,60 Latin America A289 – 24
Loading...