REVELL Ju52 3M Transport Figures User Manual [en, fr, nl, it, gr, da, no, fi, sv, es, pt, de, en, hr, et, fi, hu, lv, lt, nl, pl, ro, ru, sr, sk, sl, cs, tr, gr, bg, uk, ch, he, ar, ja, ch, ch, ko, hi, id, kk, ms, fa, pt, es, th, vi, sq, mk]

Originally developed and

used as a peacetime commer­cial airliner, the Ju52 made its
maiden flight in 1932. At the
start of World War II, when
Germany invaded Poland, the
Luftwaffe's Transportverband
had an inventory of 547
Ju52/3ms. The Ju52 was
taylor-made to supply fast
moving troops and advanced
paratrooper deployment, the
Ju52 was a real "workhorse".

KIT 5624 85562400200

JUNKERS Ju 52 / 3m TRANSPORT

* REPEAT SEVERAL TIMES

* A REPETER PLUSIEURS FOIS

READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER

* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be

marked by a star (★) to indicate chrome
plated plastic.

* For better paint and decal adhesion, wash

the plastic parts in a mild detergent solution.
Rinse and let air dry.

* Check the fit of each piece before

cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas

to be cemented.
* Allow paint to dry thoroughly before

handling parts.
* Any unused parts may be discarded.

DECAL APPLICATION INSTRUCTIONS

1. Cut desired decal from sheet.

2. Dip decal in water for a few seconds.

3. Place wet decal on paper towel.

4. Wait until decal is movable on paper backing.

5. Place decal in position on model, face up and

slide backing away.

6. Press out air bubbles with a soft damp cloth.

7. Milkiness that may appear is for better decal

adhesion and will dry clear. Wipe away any

excess adhesive.

8. Do not touch decal until fully dry.

9. Allow the decals 48 hours to dry before

applying clear coat.

NOTE: Decals are compatible with

setting solutions or solvents.

* OPTIONAL PARTS

* PIECES EN OPTION

* DECAL

* DECAL COMANIE

* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont

marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.

* Pour une meilleure prise de la peinture et des autocollants,

laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.

* Vérifier que chaque pièce s'ajuste bien avant

de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.

DIRECTIVES D'APPLICATION DES AUTOCOLLANTS

1. Découper l'autocollant désiré de la feuille.

2. Tremper l'autocollant dans de l'eau pendant quelques secondes.

3. Placer l'autocollant mouillé sur une serviette en papier.

4. Attendez que l'autocollant puisse être déplacé sur son support

en papier.

5. Mettre l'autocollant en position sur le modèle face sur

le dessus et faire glisser le support pour l'enlever.

6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.

7. La substance laiteuse qui peut apparaître est destinée à

améliorer l'adhésion de l'autocollant et devient incolore au

séchage. Essuyer pour enlever tout excédent d'adhésif.

8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.

9. Laisser l'autocollant sécher pendant 48 heures avant

d'appliquer une couche transparente.

REMARQUE: Les autocollants sont compatibles avec

* ALTERNATIVE ASSEMBLY

* ENSEMBLAGE ALTERNATIVE

les solutions de fixage ou les solvants.

* CEMENT TOGETHER

* A COLLER

* REMOVE AND THROW AWAY

* A RETIRER ET JETER

This paint guide is provided to complete this kit

Ce guide de peintures est fourni pour reproduire le modèle

Black Green

Dark Green

Flat Black

Light Gray

Light Olive Green

Yellow

Flat White

Gray

Gunmetal

Steel

Flesh

Tan

Light Blue

as shown on the box.

réduit qui apparaît sur la boîte.

* DO NOT CEMENT

* NE PAS COLLER

Vert noir

Vert foncé

Noir mat

Gris clair

Gris vert

Jaune

Blanc mat

Gris

Bronze

Acier

Chair

Havane

Bleu clair

If you have any questions or comments, call our hotline at: [phone]

or, please write to:

Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007

Be sure to include the plan number (85562400200), part number, description, your return address and phone number.

Visit our website: www.revell.com

Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.

1

47

FUSELAGE

FLOOR

GRAY

floor / cockpit ASSEMBlY

uSE thE point of A ModEling knifE to opEn

up All holES which ArE indicAtEd on thE

BottoM of thE pArt. thErE ArE A totAl of

ElEvEn holES to BE opEnEd.

49

BULKHEAD

50

BULKHEAD

GRAY

GRAY

25

HANDRAIL

GRAY

67

CONTROL

YOKE

FLAT BLACK

COLUMN

GRAY

48A

TABLE

GRAY

48

BULKHEAD

GRAY

66

CONTROL

COLUMN

GRAY

66

70

RIGHT

ADJUSTMENT

HANDLE

GRAY

1

DECAL

71

LEFT

ADJUSTMENT

HANDLE

GRAY

65

CONSOLE

GRAY WITH

FLAT BLACK

DETAILS

64

INSTRUMENT

PANEL

FLAT BLACK WITH
GRAY INSTRUMENTS
AND WHITE DETAILS

135

WINDOW

CLEAR

61

CO-PILOT'S SEAT

GRAY WITH WHITE STRAPS

AND

STEEL BUCKLES

62

RIGHT

CABIN DOOR

GRAY

68

LEFT

CABIN DOOR

GRAY

60

PILOT'S SEAT

GRAY WITH WHITE STRAPS

AND

STEEL BUCKLES

Kit 5624 - Page 2

2

APPLy GLUE

TO THE

GUNNER'S

FLOOR ONLy

LEFT FUSELAGE ASSEmbLy

114

CIRCULAR WINDOW

CLEAR

1

LEFT FUSELAGE

HALF

GRAY

(INTERIOR ONLY)

52

GUNNER'S

FLOOR

GRAY

BULKHEAD

GRAY

LIGHT GRAY

WITH WHITE BELTS

AND STEEL BUCKLES

56

SEAT

LEGS

GRAY

51

SEAT

105

AFT

BULKHEAD

GRAY

113

LEFT

SIDE WINDOWS

CLEAR

CAREFULLy

REmOVE ALL

45

LEFT INTERIOR

FRAMEWORK

GRAY

OVERFLOW

TAbS

NOTE: GLUE FUSELAGE FLOOR

55

54

HANDRAIL

GRAY

120

GUNNER'S

LADDER

GRAY

ASSEmbLy TO THE FUSELAGE

SIDE FIRST, THEN ATTACH

HANDRAIL. LADDER AND SEATS

53

BENCH SEATS

LIGHT GRAY

WITH WHITE BELTS

AND

STEEL BUCKLES

58

SEAT

LIGHT GRAY

WITH WHITE BELTS

AND STEEL BUCKLES

59

SEAT LEGS

GRAY

Kit 5624 - Page 3

3

right FUSELAgE SiDE ASSEMBLY

2

RIGHT

FUSELAGE HALF

GRAY

(INTERIOR ONLY)

HANDLE

GRAY

112

RIGHT

SIDE WINDOWS

CLEAR

CArEFULLY

rEMoVE ALL

oVErFLoW

tABS

63

TAIL WHEEL

FLAT BLACK

TIRE,GLOSS BLACK

WHEEL

134

CRANK

GRAY

26

INTERIOR FRAMEWORK

RIGHT

GRAY

53
BENCH
SEATS

GRAY

46

4

NotE:

oPEN UP thE hoLES iN thE

FUSELAgE BottoM For thE

MiLitArY AND AMBULANCE

VErSioNS AS iNDiCAtED iN thiS

DrAWiNg. oPEN UP thE tWo

PANELS AS iNDiCAtED For thE

MiLitArY VErSioN oNLY.

SEE StEPS #9 AND #10 For

oPtioNAL LANDiNg gEAr

ASSEMBLiES

Kit 5624 - Page 4

FUSELAgE BottoM

REMOVE THESE TWO

PANELS FOR THE MILITARY

VERSION ONLY

FUSELAGE BOTTOM

3

MILITARY

AMBULANCE

AMBULANCE

MILITARY

AMBULANCE

MILITARY

AND

AMBULANCE

5

FUSELAGE BOTTOM ASSEMBLY

UNDERSIDE
VIEW SHOWING
COLLECTOR IN

PLACE

6

EXHAUST COLLECTOR

82

STEEL

FUSELAGE TOP ASSEMBLY

136

CABIN LIGHT

CLEAR

137

HOIST

GRAY

138

GENERATOR

BRACKET

GRAY

133

RUDDER

CONTROL

ROD

CABIN LIGHT

69

RADIO

FLAT BLACK

136

CLEAR

132

CONTROL BOX

GRAY

OPEN HOLE

CABIN LIGHT

OPEN HOLE

136

CLEAR

FUSELAGE
ASSEMBLY

TOP HATCH CAN BE

OPENED UP TO SHOW

THE FUSELAGE ITERIOR

4

FUSELAGE TOP

GRAY

(INTERIOR ONLY)

Kit 5624 - Page 5