
KIT 2195 85219500200
Much has been written and spoken over the last eleven years
about Jeff Gordon’s dominance of the NASCAR® Cup division. As
of this writing, Jeff is 32 years of age and has already amassed
61 wins, four Cup Championships, two Daytona 500 wins…well,
you know, the list goes on for quite a while. The reason this is
especially notable and the reason why Jeff’s age is mentioned
is that barring any career ending injury or voluntary exit from the
series, it’s generally thought that Jeff still has a good fifteen or more
years ahead of him in the driver’s seat. If any driver had a chance
to attain the magical eighth Cup Championship that eluded both
Richard Petty and the late Dale Earnhardt, it’s Jeff.
Yet, time goes on and Jeff Gordon is no longer the young whiz
kid but a seasoned veteran although he’s still younger than the
majority of competing drivers. What does the future hold? It’s hard
to predict how many more records Jeff can break and how many
more races he can win. Jeff’s amazing success over the years has
also spurred NASCAR® race team owners to bring in younger and
younger drivers to their own programs. Ironically, those young guns
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* OPTIONAL PARTS
* PIECES EN OPTION
* DECAL
* DECAL COMANIE
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
Jeff Gordon
DuPont® 2003 Monte Carlo
®
™
have also shown an amazing ability to quickly acclimate themselves to the difficulties of professional auto racing, winning pole
positions and races and providing Jeff Gordon a reason to keep a
look out over his shoulder. The new drivers are coming up quickly
and they all look to Jeff as their inspiration-and competition.
Jeff can’t rest on his laurels for long and neither can RevellMonogram. While our 1:24 NASCAR® glue kits have long been the
leaders of the market, constant changes made by the sanctioning
body require us to continue to change and improve our kits for you,
our customers. If you have built our race car kits previously, you’ll
notice how many changes we’ve made to our Monte Carlo™ stockers. Besides revising the decal sheets to accurately depict how the
#24 looks as it streaks across the track and your TV screen during the 2003 season, we’ve also made substantial revisions to the
chassis. Look for a more realistic drivers seat, rear springs, front
& rear shocks, rear end cooler detail, front engine detail and much
more.
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
This paint guide is provided to
complete this kit as shown on the box
Ce guide de peinture est fourni pour reproduire le
modèle réduit qui apparaît sur la boîte.
Aluminum
Dark Gray
Flat Black
Flat Red
Flat White
Gloss Black
Gloss Blue Metallic
Gloss Gray
Gloss Red
Gold
Gunmetal
Jet Exhaust
Semigloss Black
Aluminium
Gris foncé
Noir mat
Rouge mat
Blanc mat
Noir brilliant
Bleu brilliant metallisé
Gris brilliant
Rouge brilliant
Or
Bronze
Flux d’éjection
Noir satiné
.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr, Northbrook, Illinois 60062
Be sure to include the plan number (85219500200), part number, description, your return address and phone number.
Visit our website: www.revell-monogram.com
REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved.