Renesas FP-144G, FP-144H, 6FF3FP, 8FF3FP, 7FF3FP User Manual

H8S/2678 Series, H8S/2678R Series,

H8S/2668 Series FP-144G/FP-144H

User System Interface Cable

(HS2678RECH61H)

for E6000 Emulator

User’s Manual

HS2678RECH61HE(C)

Cautions

1. Renesas neither warrants nor grants licenses of any rights of Renesas’s or any third party’s
patent, copyright, trademark, or other intellectual property rights for information contained in
this document. Renesas bears no responsibility for problems that may arise with third party’s
rights, including intellectual property rights, in connect ion with use of the information contained
in this document.

2. Products and product specifications may be subject to change without notice. Confirm that you
have received the latest product standards or specifications before final design, purchase or use.

3. Renesas makes every attempt to ensure that its products are of high quality and reliability.
However, contact Renesas’s sales office before using the product in an application t hat demands
especially high quality and reliability or where its failure or malfunction may directly threaten
human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power,
combustion control, transportation, traffic, safety equipment or medical equipment for life
support.

4. Design your application so that the product is used within the ranges guaranteed by Renesas
particularly for maximum rating, operating supply voltage range, heat radiation characteristics,
installation conditions and other characteristics. Renesas bears no responsibility for failure or
damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider
normally foreseeable failure rates or failure modes in semiconductor devices and employ
systemic measures such as fail-safes, so that the equipment incorporating Renesas product does
not cause bodily injury, fire or other consequential damage due to operation of the Renesas
product.

5. This product is not designed to be radiation resistant.

6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document
without written approval from Renesas.

7. Contact Renesas’s sales office for any questions regarding this document or Renesas
semiconductor products.

Preface

Thank you for purchasing this user system interface cable (HS2678RECH61H) for the Renesas’s
original microcomputer H8S/2678 series, H8S/2678R series, H8S/2668 series.

The HS2678RECH61H is a user system interface cable that connects an H8S/2678 series,
H8S/2678R series, H8S/2668 series E6000 emulator (HS2678REPI61H; hereinafter referred to as
the emulator) to the IC socket for a FP-144G/FP-144H package for the H8S/2678 series,
H8S/2678R series, H8S/2668 series MCU on the user system.

i

Contents

Section 1 Configuration......................................................................................1

Section 2 Connection Procedures .......................................................................3

2.1 Connecting User System Interface Cable to Emulator Station.........................................3

2.2 Connecting User System Interface Cable to User System................................................5

2.2.1 Installing IC Socket .............................................................................................5

2.2.2 Soldering IC Socket.............................................................................................5

2.2.3 Inserting Cable Head ...........................................................................................6

2.2.4 Fastening Cable Head..........................................................................................6

2.2.5 Fastening Cable Body..........................................................................................8

2.3 Recommended Dimensions for User System Mount Pad.................................................9

2.4 Dimensions for User System Interface Cable Head..........................................................10

2.5 Resulting Dimensions after Connecting User System Interface Cable .............................11

Section 3 Installing the MCU to the User System.............................................12

Section 4 Verifying Operation...........................................................................14

Section 5 Notice ................................................................................................15

ii

Section 1 Configuration

CAUTION

Use an IC149-144-045-B51 socket (manufactured by
YAMAICHI ELECTRONICS CO., Ltd.) for the FP-144G/
FP-144H package IC socket on the user system.

Figure 1 shows the configuration of the HS2678RECH61H user system interface cable for the
FP-144G/FP-144H package.

Figure 1 HS2678RECH61H User System Interface Cable

1

Table 1 lists the HS2678RECH61H components. Please make sure you have all of these
components when unpacking.

Table 1 HS2678RECH61H Components

No. Component Quantity Remarks

1 Cable body 1
2 Cable head 1
3 IC socket 1 For the FP-144G/FP-144H package
4 Socket cover 1 For installing an FP-144G/FP-144H packaged

5 Screws (M2 x 12 mm) 4 For fastening cable head with four flat washers
6 Screws (M2 x 8 mm) 4 For installing an FP-144G/FP-144H packaged

7 CTS screws (M3 x 6 mm) 2 For fastening the emulator station
8 Documentation 1 User’s manual for HS2678RECH61H (this

MCU

MCU with four flat washers

manual)

2