™
MicroFlex
Congratulations
You are now the owner of one of the finest
s h aving instruments av a i l able today...and thank
you for letting Remington play a part in keeping
you well gr o o m e d .We’re proud of our products
and the technology that keeps them perfo r m i n g
d e p e n d ab ly and eff i c i e n t ly.Your Remington
M i c r o F l e x™ S h aver is designed to provide you
with a closer,faster more comfo r t able shave
for years to come.
For best shaving
p e r fo r m a n c e , it is
recommended that you
use your new shav e r
d a i ly for two to three
weeks to allow time
for your beard and
skin to adjust.
Customer Serv i c e
N u m b e r
1-800-736-4648
call between 8:30 A . M . 4:30 P. M .E . S . T .
®
®
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical shaver, basic precautions should always be followed including the
following. Read all instructions before using this
shaver.
DANGER
To reduce the risk of electric shock:
■ Do not place or store shaver where it can
fall or be pulled into a tub or sink.
■ Do not place in water or other liquid.
■ Do not reach for a shaver that has fallen
into water, unplug immediately.
■ Except when charging, always unplug this
shaver from the electrical outlet immediately
after using.
■ Unplug this shaver before cleaning.
■ Do not use while bathing or in a shower.
WARNING
To reduce the risk of burns fire, electric shock,
or injury to persons:
■ A shaver should never be left unattended
when plugged in, except when charging your
rechargeable shaver.
■
Close supervision is necessary when this shaver
is used by, on, or near children or invalids.
■ Use this shaver only for its intended use as
described in this manual. Do not use attachments not recommended by the manufacturer.
■ Never operate this shaver if it has a dam-
aged cord or if it is not working properly, if it
has been dropped or damaged, or has been
dropped into water. Return the shaver to
a service center for examination and repair.
■ Keep the cord away from heated surfaces.
■ Never drop or insert any object into any
opening.
■ Do not use outdoors or operate where
aerosol (spray) products are being used
or where oxygen is being administered.
■ Do not use this shaver with a damaged or
broken cutter or head, as facial injury may
occur.
■ Always pull on cord plug to unplug from
wall socket. Never pull on electric cord.
■ Do not plug or unplug shaver when hands
are wet.
■ Always store your shaver and cord in a
moisture-free area. Make sure your cord is
disconnected from the shaver.
■ “Household Use Only”.
SAVE THESE
INSTRUCTIONS
Getting Used To Your Shaver
As with every shaver, your shaver will improve over time. So
allow about three weeks to develop an effective shaving style
and for your skin to adjust to the new shaver.The adaptation
period may take a little longer if your skin is sensitive,if you
are switching from a different way of shaving,or it your alternate between shaving methods.
To Shave
Push the on/off button locking bar
inward and push upward on the on/off
button to actuate the shaver for shaving.(Locking bar on rechargeable
models only.)
To Trim
To use the Easy-View™pop-up trimmer,
simply push the trimmer button up.The
trimmer will pop-up for use.Hold the
shaver as shown in the illustration.To
conserve battery energy (on rechargeable shavers only),it is recommended to use the trimmer only
when needed for trimming.When through using,push the
trimmer button downward to lock into the off position.
Trim Sideburns
Simply touch the comb-edge of the
trimmer to the desired line for neat,
clean sideburns.
Trim mustache
Hold shaver at desired trim line for a
quick easy,professional trim.The trimmer can also be used to trim the upper
edge of your moustache.
Shaving Tips and Instructions
For a smoother,more comfortable,moisture free shave,use
a Remington®Pre-Shave Powder Stick.For those who prefer
a liquid,use the non-greasy Remington®Pre Shave Lotion,
specially formulated with a unique suspended powder and
aloe for extra conditioning and protection.
Tips For Use
• Clean your shaver frequently.
• Always keep the protective headquard on the cutter head and keep
the trimmer in the “off” position when the shaver is not in use.
• Before using,make sure that the cutter head assembly is in locked
position.
• Wait at least 15 minutes after getting up before shaving.
• Thoroughly cleanse and dry skin prior to shaving.
• Your R-850 cord/cordless shaver should not be used strictly as
a cord-operated shaver, as continued cord only use will result in
reduction of battery life.
Operation Instructions
The MicroFlex™shaver needs no adjustments to the heads or cutters
before you shave.The floating heads will automatically adjust to the
contours of your face.It is not necessary to apply pressure while shaving...let the shaver glide lightly on your skin.This gentle touch makes
shaving easier and helps avoid possible skin irritation.
Cleaning Your Shaver
TO ASSURE SMOOTH, EFFICIENT PERFORMANCE,
IT IS IMPORTANT TO CLEAN YOUR SHAVER.
Cleaning your Remington®MicroFlex™Shaver is easy.
Simply pull the head assembly out from the shaver by
placing fingers on rib areas of head assembly.Using
the brush supplied,clean the internal part of the head
assembly and the hair pocket area,
where 3 shaver spindles are located.
“At Least Once A Week”.
For more complete cleaning,remove
the cutter retainer assembly from the
head assembly by unscrewing the
center screw knob and clean with
brush.After cleaning put the cutters
back in position.Place the cutter retainer back into
position. Important! Make sure to align the two locating holes in the Cutter Retainer assembly with the
pins in the Head Frame Assembly.(See below).Then
tighten centerscrew knob to lock cutters into place.
Put head assembly onto the shaver
simply by pushing in onto the
shaver.Replace the plastic headguard after cleaning.When removing the headguard or placing it
back onto the shaver, do not apply
pressure to floating cutter surface
as you may damage them. Never
clean the shaver or replace the
cutters while it is plugged into electrical outlet.
Cutter Retainer
Assembly
Locating Holes
Center
Screw
Knob
Head/Frame
Assembly
Locating Pins
Floating
Cutter
Heads