Remington R4110 User Manual

PIVOT & FLEX

TECHNOLOGY

R4110

REFRESH YOUR LOOK

Scan the QR code to check out our weekly man-style tip to keep you looking good! or visit

Join us for special offers, grooming tips and product news.

Use and Care Guide

By registering your new Remington® product, you will receive these important benefits:

Proof of Ownership • Product Protection • Product Registration • Special Offers

RemingtonProducts.com/ManStyle

@RemReadyMan

Facebook.com/RemingtonReady

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic precautions should always be observed, including the following. Read all instructions before using this shaver.

DANGER

To reduce the risk of electric shock:

■Do not reach for an appliance that has fallen into water. Unplug it immediately.

■Do not use while bathing or in the shower.

■ Do not place or drop into water or other liquid.

■ Do not place or store this appliance where it can fall or be pulled into a tub

or sink.

■ Except when charging, always unplug this appliance from the electrical outlet immediately after using.

■Use only when the shaver is in dry condition.

■Detach the appliance from the power supply cord before cleaning.

■Do not submerge in water.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:

■An appliance should never be left unattended when it’s plugged in, except when charging a rechargeable appliance.

■Close supervision is necessary when this appliance is used by, on, or near children, or individuals with special needs or certain disabilities.

■ Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by manufacturer.

■ Never operate this appliance if it has a damaged cord or plug or if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water.

■ Keep the cord away from heated surfaces.

■ Never drop or insert any object into any of the appliance’s openings.

■ Household use only.

■ Do not use outdoors or operate where aerosol (spray) products are being used

or where oxygen is being administered.

■ Always attach the plug to the appliance, then to outlet. To disconnect, turn all controls to OFF, then remove plug from outlet.

■ Always pull on cord plug to unplug from wall socket. Never pull on electric cord.

■ Do not plug or unplug this appliance when your hands are wet.

■Do not use an extension cord or a voltage converter with this appliance.

■Do not wrap the cord around the appliance.

■ Always store this appliance and cord in a moisture-free area. Do not store it in

temperatures exceeding 140°F (60°C).

■ Detach removable power cords from appliance for storage.

■ Do not use this appliance with a damaged or broken head or cutters, as facial

injury may occur.

■ Shavers, including the trimmer, are for use on facial hair only. They should not be used for shaving the hair on your head or any other part of your body.

■ The power unit is intended to be oriented in a vertical or floor mount position.

SAvE ThESE INSTRUCTIONS

Product Features

SHAVER PARTS

1. Pivoting head & cutter assembly

2. Hairpocket release button

3. Individual flexing heads

4. On/Off slide switch

5. Power port

6. Trimmer button

7. Power adapter

8. Cleaning brush

About Your Shaver

FEATURE R4110

POWER SYSTEM cordless

FULL CHARGE TIME 16 hrs

CORDLESS SHAVE TIME 35 min

INDICATORS charging

VOLTAGE TYPE single

REPLACEMENT PART NO. SPR

Power System Cordless – shaver can only be used without the power cord.

Voltage Type Single Voltage – shaver can only be used with an outlet voltage of 120V.

Charging

A B C

Before using, read the important safety instructions in front of the manual.

1. Plug power adaptor into shaver. (Diagram A)

2. Plug power adaptor into wall outlet. (Diagram B)

3. Charge your new shaver for 24 hours before its first use. This first charge is

important to the shaver’s battery life. (Diagram C)

4. Use shaver until recharge is required.

CAUTION!

■Make sure the shaver and your hands are dry when charging the shaver.

■Always charge the shaver in a cool, dry place.

Shaving

Before using, read the important safety instructions in front of the manual.

D E

1. Slide power switch up to turn on. (Diagram D)

2. Shave face and neck using short, circular strokes. (Diagram E)

Shaving Tips

■Ensure your skin is dry and free of oils.

■Wait at least 15 minutes after getting up before shaving, to ensure your face is

free of puffiness that may be present from sleeping.

■Always hold the shaver at a right angle to the skin so that all three heads are touching the skin with equal pressure.

■Stretch skin with the free hand so hairs stand upright, making it easier for them to enter the cutting chamber.

■Use moderate to slow, circular stroking movement.

■The use of short, circular motions in stubborn areas may obtain a closer shave,

especially along the neck and chin line.

■Do not press hard against the skin in order to avoid damage to the rotary heads.

**Remington recommends that you use your new shaver daily for up to four weeks to allow time for your hair and skin to become accustomed to the new shaving system**

Trim

1. Pull trimmer release button down to engage trimmer. (Diagram F)

2. Trim long, difficult hairs and side burns. (Diagram G)

3. Close trimmer by pressing down on trimmer housing. (Diagram H)

G H

Cleaning & Care

NOTE: **When cleaning your shaver, make sure the shaver is turned off and disconnected from the power cord.**

CAUTION!

■To clean the external surfaces of the shaver, use a damp cloth. Do not use strong detergents or other chemicals.

■To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer or heater to dry the shaver.

■Ensure that the main body of the shaver remains dry at all times.

I J

Daily:

1. Press the hairpocket release button to open hairpocket assembly. (Diagram I)

2. Tap out excess hair shavings. (Diagram J)

3. Close hairpocket assembly. (Diagram K)

Monthly:

1. Perform the daily cleaning steps 1 and 2.

2. Remove the cover from the hairpocket assembly. (Diagram L) Place the body of

the shaver aside to ensure that it will not get wet.

3. Place a drop of liquid soap on each cutter. (Diagram M)

4. Brush the soap around vigorously using the supplied cleaning brush. (Diagram N)

5. Release the inner cutter carrier by rotating the locking arms counter-clockwise.

(Diagram O)

6. Remove the inner cutter carrier away from the cutters. (Diagram P)

7. Remove the cutters. (Diagram Q)

8. Thoroughly brush any hair off of the inner and outer cutters (Diagram R) and

rinse away any soap and debris from inner and outer cutters. (Diagram S)

9. Replace the inner cutters. (Diagram T)

10. Place the inner cutter carrier back into position and lock into place by rotating

the locking arms clockwise until they snap into place. (Diagram U)

11. Lubricate each cutter with household oil.

12. Close the head assembly. (Diagram K) ** Trimmer: Lubricate teeth with oil every six months.

Battery Removal

When your rechargeable shaver reaches the end of its useful life, the Ni-MH batteries must be removed from the shaver and be recycled or disposed of properly in accordance with your state and local requirements. If this is not required by law, you may elect to dispose of the shaver with the batteries.

CAUTION! Do not put in fire or mutilate your batteries when disposing as they may burst and release toxic materials. Do not short circuit as it may cause burns. Dispose of properly in accordance with your local and state requirements.

To Remove the Rechargeable Battery:

1. Unplug the shaver.

2. Run shaver until motor stops.

3. Remove head from shaver (Press release button and pull head straight away

from shaver body)

4. Using a small screwdriver pry front cover from shaver body.

5. Remove four screws located on front of shaver.

6. Remove rear cover from inner housing to expose batteries.

7. Pry batteries free from circuit board and cut wires.

8. Dispose of batteries.

How To Order Shaver Accessories

Please refer to the shaver features chart near the front of this manual that lists the correct replacement part number for your shaver.

It is very important to replace your head and cutters when necessary to ensure a close, comfortable shave without irritation. We recommend they be replaced every 12 months. Here are some signs of head and cutter wear, indicating that replacement is needed:

■Irritation: As the heads get excessively worn you may experience some skin irritation. This would be especially noticeable when you apply moisturizing lotion.

■Pulling: When the cutters wear you may feel a sense of pulling and a loss of closeness when you shave. This is an indication that it is time to replace your heads and cutters.

Maintain your shaver’s peak performance! Keep Your Shaver Performing Like New!

■Because your satisfaction is important to us, we want to make it simple for you to keep your new shaver performing at its peak.

■Did you know that for the best possible shave, it is necessary to replace the heads and cutters on your shaver every 12 months?

■Remington makes this easy!

Two Easy Ways to Order!

1. Call! U.S. Residents call 1-800-392-6544

Canadian Residents call 1-800-268-0425

2. Order Online at www.RemingtonProducts.com

Warranty

Limited Two-Year Warranty

Spectrum Brands, Inc. warrants this product against any defects that are due to faulty material or workmanship for a two-year period from the original date of consumer purchase. This warranty does not include damage to the product resulting from accident or misuse. If the product should become defective within the warranty period, we will replace it free of charge. Return your product and sales receipt with your name, address and day time phone number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648 in the US or 800-268-0425 in Canada.

Warranty excludes:

■ Heads and cutters

KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.

This warranty does not cover products damaged by the following:

■ Accident, misuse, abuse or alteration of the product

■ Servicing by unauthorized persons

■ Use with unauthorized accessories

■ Connecting it to incorrect current and voltage

■ Wrapping cord around appliance causing premature wear & breakage

■ Any other conditions beyond our control

Performance Guarantee

SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province. Some states do not allow the exclusion or limitation of incidental, special or consequential damages.

Spectrum Brands, Inc.

If within 30 days after you have purchased your Remington® branded product, you are not satisfied and would like a refund, return it with the sales slip indicating purchase price and date of purchase to the retailer from whom it was purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30 days from the date of purchase. If you have any questions concerning the moneyback guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.

120 VAC, 60 Hz

Questions or comments: Call 800-736-4648 in the US or 800-268-0425 in Canada. Or visit www.RemingtonProducts.com

Dist. by: Spectrum Brands, Inc., Madison, WI 53711 Dist. by: Spectrum Brands Canada, Inc., Mississauga, ON L5L OA1

Money-back Offer

R S

Product Registration

By registering your new Remington® product you will receive these important benefits:

■Proof of ownership

■Product protection

■Product registration

■Special offer

Manufactured to Remington’s speciﬁcations in the PRC. T22-32201

Contains a

listed adaptor