Remington MicroScreen 2 TCT Use & Care Manual

How to get a great shave
from your Remington

®

MicroScreen®2

®

Thank you for buying this premium shaver
from Remington

®

Inside you’ll find tips on using and caring for
your shaver to get the best shave possible.

Model Numbers
MS2-90
MS2-100
MS2-200
MS2-300
MS2-400

®

®

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE

INSTRUCTIONS

■ Use this shaver only for its intended use as described in
this manual. Do not use attachments not recommended
by the manufacturer.

■ Keep the cord away from heated surfaces.

■ Never operate this shaver if it has a damaged cord

or plug,or if it is not working properly, if it has been dropped
or damaged,or dropped into water. Return the shaver to a
service center for examination and repair.

■ Never drop or insert any object into any opening on
the shaver.

■ Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.

■ Do not use this shaver with a damaged or broken screen
or cutter,as facial injury may occur.

■ A lw ays attach plug to shav e r, then to outlet.To disconnect,
turn all controls to "Off " , then remove plug from outlet,
then detach power cord from the shaver for storag e .

■ Always store your shaver and cord in a moisture-free
a r e a . Make sure your cord is disconnected from
the shaver.

■ Do not plug or unplug shaver when hands are wet.

■ For household use only.

When using an electric shaver,basic precautions should
always be observed,including the following.Read all
instructions before using this shaver.

DANGER

To reduce the risk of electric shock:

■ Do not reach for a shaver that has fallen into water.
Unplug immediately.

■ Do not use while bathing or in the shower.

■ Do not place or drop into water or other liquid.

■ Do not place or store shaver where it can fall or be

pulled into a tub or sink.

■ Except when charging,always unplug this shaver from
the electrical outlet immediately after using.

■ Unplug this shaver before cleaning.

WARNING

To reduce the risk of burns, fire, electric
shock, or injury to persons:

■ A shaver should never be left unattended when plugged
in, except when recharging your rechargeable shaver.

■ Close supervision is necessary when this shaver is used
by,on,or near children or invalids.

Getting a Close, Comfortable Shave

Congratulations on your purchase of a premium
Remington®MicroScreen®2 TCT®Shaver.Your new
Remington®MicroScreen®2 is the only one with Total
Closeness Technology™(TCT®). TCT® combines two
super-flexing screens with a specially designed
Intercept Trimmer™that shaves even the most difficult
parts of your face, including your neck, incredibly
close. The Intercept Trimmer™ works in tandem with
the screens to first cut the difficult longer hairs that
then allows the screens to shave the shorter hairs
even closer.

As with every shaver, your shave will improve over
time. So allow about three weeks to develop an
effective shaving style and for your beard to adjust
to the new shaver. The adaptation period may take
a little longer if your skin is sensitive, or if you
alternate between shaving methods.

When you first removed your MicroScreen®2 TCT

®

S h aver from its box, you may have noticed what
appears to be small particles of white or gr ay powder
on the screen or in or around the cutter assembly.
The particles are from a coating of a special lubricant
applied to the new screens and cutters to help
smooth the transition to your new shaver. They will
disappear with use.

The Best Technique

It’s simple to get a great shave from your new shaver.
Here are a few tips for getting the closest shave possible:

Always use a clean,dry shaver.

Wait at least 15 minutes after getting up
before shaving, to ensure the face is free
of puffiness that may be present from
sleeping.

Make sure your face is clean and dry
before starting.

Hold the shaver so the two screens touch
your face together. This allows the shaver
to work the way it was designed for the
closest shave and minimum screen wear.
Avoid holding the shaver at an angle so
only one screen touches the skin. This
will distort the screen and may cause
some skin irritation.

Use short, circular strokes. Use your
f ree hand to stretch your skin. T h i s
e n c o u rages your whiskers to stand out,
making it easier for them to enter the
cutting chamber.

Never press hard. Pressing hard only
flattens your whiskers, which makes it
harder for them to enter the cutting
chamber.It will also wear out the foils
more quickly.

Your Remington®MicroScreen®2TCT®Shaver is equipped with
a special Intercept Trimmer™ that allows you to shave long hairs
on facial and neck areas, or trim a beard or mustache quickly

and easily.

For shaving longer hairs,use Trimmer
setting #2.(Press left side of trimmer
button).

For shaving sideburns/mustache,use
Trimmer setting #3.(Press right side of
trimmer button).

To extend battery life, retract the trimmer to setting #1 while you
are shaving.

For a Better Shave…

To help maximize your shaver’s performance, consider using the
Remington®Pre-Shave Powder Stick (SP-5) or the Remington®Pre­Shave Lotion with Aloe (SP-6). Just rub over your beard. Both
products absorb moisture and facial oils, helping set up the hairs
so they enter the cutting chamber more easily. They make shaving
quicker and more comfortable.

6

1 2

9 3