Remington H-1048 User Manual
®
Smart Setter®16
16 COLORHEAT 2000®ROLLERS
The ro l l e r s
that change
color when
ready to use
HEAT
UP WITH
LID OPEN
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always
be followed, including the following.
READ ALL INSTRUCTIONS BEFORE
USING. KEEP AWAY FROM WATER
DANGER
To reduce the risk of electric shock:
1. Always unplug this appliance immediately
after using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place or drop into water or other liquid.
5. If an appliance falls into water, “unplug it”
immediately. Do not reach into the water.
WARNING
To reduce the risk of burns, electric
shock, fire, or injury to persons:
1. This appliance is for household use only.
2. An appliance should never be left unattended
when plugged in.
3.Close supervision is necessary when this appliance is used by, on, or near children or invalids.
4. Use this appliance only for its intended use as
described in this manual. Do not use
not recommended by Remington.
attachments
5 . Never operate this appliance if it has a damaged
c o rd or plug; if it is not working properly; or if it has
been dropped, damaged or dropped into water.
R e t u rn the appliance to the Remington Customer
S e rvice Center for examination and re p a i r.
6. Keep the cord away from heated surfaces. Do not
wrap cord around the appliance.
7. Do not use an extension cord with this appliance.
8. Never block the air openings of the appliance or
place it on a soft surface, such as bed or couch,
where the air openings may be blocked. Keep the
air openings free of lint, hair, etc.
9. Never use while sleeping.
10.Never drop or insert any object into any opening.
11.Do not use outdoors or operate where aerosol
(spray) products are being used or where oxygen
is being administered.
12.Do not touch the posts that hold the rollers. They
are hot.
13.Keep lid open when heating rollers.
SAVE THESE
INSTRUCTIONS
Model H-1048
Operating Instructions
1.This appliance is designed to work on ordinary household
current only (120 volts,60 cycles AC).It is not intended for
commercial use.
2. Place unit on a hard,flat,heat resistant surface.
3. Open lid and plug into outlet.Please note that damage to
the unit could occur if heated with lid closed.When unit is
heated,follow instructions shown for use.When finished
applying rollers in hair, unplug and allow to cool before
replacing lid or storing away.
4. This appliance has a polarized plug (one blade is wider
than the other).As a safety feature,this plug will fit in a
polarized outlet only one way. If the plug does not fully fit in
the outlet,reverse the plug.If it still does not fit,contact a
qualified electrician to install a polarized outlet.Never try to
defeat this safety feature.
Maintenance Instructions
1. Clean unit with damp cloth only. No other maintenance is
required.
2. Store appliance and cord where they will not be damaged.
Do not wrap cord around hairsetter.
3. Do not attempt to repair the appliance yourself.Return to
Remington Customer Service.
Smart Setter®16
16 COLORHEAT 2000®ROLLERS
• Easy-Grip surface makes rolling hair simple.Surface grips ends
of hair and is comfortable in the hair. Especially good for hard to
handle, flyaway hair.
• Sixteen 1”large rollers.
• Rollers have the Remington exclusive high-energy wax core that
retains heat longer for curls that last.
• Custom Clips are easy to use and hold rollers in place.
• Rollers turn uniformly white when ready to use.
• If you desire additional rollers and clips,please see the Accessory
Order Form section.
Will the rollers be too hot to touch when they’re
completely white?
No.However,the end caps of the rollers are made of a different
material.They will remain the same color when the roller is heated.
When curling your hair, lift the rollers by this colorful rim.They are
designed to be held while rolling your hair for comfort and ease of use.
How do I know when the rollers are at the “right”
temperature for curling my hair?
Follow the illustration in the “HOW TO USE”section.When all the
rollers have reached the same uniform white color, your Smart Setter
is ready to use.
Will the rollers return to their original color
after I set my hair?
Yes. You may even see the surface of a roller begin to return to its
original color as you curl your hair. Depending on the length of your
hair and the length of time you leave the rollers in,your rollers should
be blue when you take them out.(The rollers take about 15 minutes to
cool down.)
How long should I leave the rollers in my hair?
Again,depending on the length and the texture of your hair,as well
as the tightness of the curl you want,timing will vary.Feel free to
experiment and have fun with your new Smart Setter®.
®
Loading...