Remington F-7790CS User Manual

Power Clean

Advanced Cleaning Technology

CS-7, CS-8, CS-9

Use and Care Guide

Register Your New Product Today!

By registering your new Remington® product, you will receive these important benefits:

Proof of Ownership • Product Protection • Product Registration • Special Offers

Register online at: www.RemingtonProducts.com

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.

DANGER

To reduce the risk of electric shock:

■ Do not reach for an appliance that has fallen into water. Unplug it immediately.

■ Do not place or store this appliance where it can fall or be pulled into a tub or

sink while it is plugged in.

■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.

■ Unplug this appliance before cleaning it.

■ Do not use an extension cord or a voltage converter with this appliance.

■ Do not submerge in water.

■ Detach the appliance from the power supply cord before cleaning.

WARNING

To reduce the risk of burns, fire, electric shock or injury to persons:

■ This appliance is for household use only.

■ Close supervision is necessary when this appliance is used by, on, or near

children or persons with certain disabilities.

■ Use this appliance only for its intended use as is described in this manual. Do
not use attachments not recommended by the manufacturer.

■ Keep the cord away from heated surfaces.

■ Never operate this appliance if it has a damaged cord or plug, if it is not working

properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.

■ Never drop or insert any object into any of the appliance’s openings.

■ Do not use outdoors or operate where aerosol (spray) products are being used,

or where oxygen is being administered.

■ Always store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 140°F (60°C).

■ Do not plug or unplug this appliance when your hands are wet.

■ Do not wrap the cord around the appliance.

■ Always attach the plug to the appliance, then to the outlet. To disconnect,

remove plug from outlet. Detach removable power cords from appliances for
storage.

■ Do not use this appliance with a damaged or broken screen or cutters, as injury
may occur.

■ For use only with UL listed Remington power adaptors model numbers
PA-400/PF-400.

■ For use only with Remington cleaning solution CCR-REM.

■ Use this appliance only with washable shavers.

SAVE THESE INSTRUCTIONS

Product Features

Remington® Power Clean

Congratulations on your purchase of a premium Remington® cleaning system.

(A) Upper Base Housing
(B) On Button
(C) Trapdoor*
(D) Solution Cup
(E) Lower Base Housing
(F) Charging Dock
(G) Cleaning Solution
(H) Filter

*Trapdoor on foil cleaning bases only

(B) On Button

(C) Trapdoor

(E) Lower Base
Housing

(G)

(A) Upper Base Housing

(D) Solution Cup

(F) Charging Dock

(H) Filter

How To Use

Preparing the Cleaning System

1. Lift the upper housing off the unit. Remove the trapdoor from solution cup (foil
cleaning only). Remove the cleaning solution cup from the base.

2. Pour approximately 4oz. of solution into the cup, making sure the liquid level is
within the textured band visible on the inside of the cup.

3. Place one filter into the solution cup.

4. Place the trapdoor back in the solution cup (foil cleaning only).

5. Place the cup back inside the lower base and replace the upper housing.

6. Plug the power adaptor into the cleaning base and then into the wall outlet.

Operating the Cleaning System

For best results, run the cleaning cycle after each shave. If you have used your
shaver for multiple days between cleanings, or you notice excessive buildup on the
cutters, you may need to turn the shaver ON for 60 seconds during the cleaning
cycle.

Cleaning

1. Ensure the pop-up trimmer is in the down position.

2. Place the shaver head-down in the opening on the top of the cleaning base.

Make sure the ledge on the inside of the cleaning base opening is aligned with
the trimmer in order to position the shaver in the correct orientation for cleaning.

3. Press the ON button to start the cleaning cycle. The cleaning cycle will run
for approximately 4 minutes. Once the cleaning cycle has begun it will run to
completion. Pressing the On button again will not pause or stop the cleaning
cycle. During this time, DO NOT remove the shaver from the base.

4. When the cleaning cycle has completed, a fan will turn on to assist in drying
the shaver. When the fan turns off (after approximately 4 hours), the process is
complete.

NOTE: For rotary cleaning systems, press down the shaver power button for 5
seconds to initiate the shaver cleaning cycle. Place the shaver in the cleaning base
and follow the cleaning direction steps 1-4.

NOTE: The shaver cannot charge in the cleaning base, only in the charging dock
connected to the cleaning base or using the charging adaptor.

NOTE: During the cleaning and drying cycle, the charging stand will not function. To
charge your shaver, wait until the drying cycle has completed.

Cleaning Solution

For best results, ensure the solution is filled to the appropriate level before each
cleaning cycle. With daily use, it may be necessary to add solution every 3-4 days.
After 14 days of use, the solution and filter should be discarded and replaced
entirely.

To replace the cleaning solution:

1. Remove the cup from the base unit. Remove the trapdoor (if applicable).

2. Dispose of the solution in a sink or toilet.

3. Rinse any remaining debris from the cup using water.

4. Dry the cup.

5. Fill the cup with fresh solution.

6. Place one filter into the solution cup. Replace the trapdoor (if applicable).

7. Replace the cup into the base unit.

U.S. residents: To order accessories call 800-392-6544, visit

www.RemingtonProducts.com, or visit your local retailer.

Canadian residents: To order accessories, please call 800-268-0425, visit
www.RemingtonProducts.com or visit your local retailer.

Please Read

Remington’s proprietary cleaning solution contains lubricants and
conditioners that keep your shaver working like new and extends the life of
the cutting system. For most effective results, it is recommended to clean
your electric shaver after every use. After each cleaning cycle, allow 24 hours
for your shaver to dry.

NOTE: In areas of high humidity or low temperatures, your shaver may be slightly
damp after 24 hours following the cleaning cycle. If this is the case, use a soft
towel to gently pat dry the shaver screens or simply turn the shaver on for a few
seconds before shaving to remove the moisture.

Additional Cleaning Instructions

For most effective results, perform a deep cleaning cycle once per week. This
will prevent excessive buildup in corners and other hard to clean areas. To per­form a deep cleaning cycle, follow the
directions below:

1. Load the shaver in the base as usual

2. Turn the PowerClean system ON

3. Turn the shaver ON (while in the base) for 60 seconds

4. Turn the shaver OFF and allow the cycle to finish as usual

Performance Guarantee

Limited Two-Year Warranty

Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a two-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.

If the product should become defective within the warranty period, we will replace it
free of charge. Return your product and sales receipt with your name, address and
day time phone number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1,
Deforest, WI 53532. For more information call 800-736-4648 in the US or 800-268­0425 in Canada.

KEEP ORIGINAL SALES RECEIPT AS
PROOF OF PURCHASE FOR WARRANTY PURPOSES.

This warranty does not cover products damaged by the following:

■ Accident, misuse, abuse, or alteration of the product

■ Servicing by unauthorized persons

■ Use with unauthorized accessories

■ Connecting the unit to incorrect current

and voltage

■ Wrapping the cord around the appliance,
causing premature wear and breakage

■ Any other conditions beyond our control

SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
TWO YEARS FROM DATE OF ORIGINAL PURCHASE.

This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special, or consequential damages.

Spectrum Brands, Inc.
Money-back Offer

If within 30 days after you have purchased your Remington® branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat­ing purchase price and date of purchase to the retailer from whom it was pur­chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the US or 800-268­0425 in Canada.

Questions or comments:

Call 800-736-4648 in the US or 800-268-0425 in Canada.
Or visit www.RemingtonProducts.com

Dist. by: Spectrum Brands, Inc.,
Madison, WI 53711

Dist. by: Spectrum Brands Canada Inc.,
Mississauga, ON L5L 0A1

®Registered Trademark and of ROVCAL, Inc.

© 2010 SBI
05/10 Job# CS40001

Manufactured to Remington's specifications in the PRC. T22-30330

12VDC