Remington B75150A User Manual
ELECTRIC BLOWER
OWNER’S MANUAL
FPO
®
MODEL: B75150A
IMPORTANT: Read and understand this manual before assembling or
operating this appliance. Improper use of this appliance can cause severe
injury or death. Keep this manual for future reference.
Double Insulated
STOP
STOP
PARA
ARRÉ
T
PARA
ARRÉ
DO NOT RETURN PRODUCT TO STORE.
CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE
For more information, visit www.remingtonpowertools.com
This manual is your guide to safe and proper operation of the electric blower.
SAVE THESE INSTRUCTIONS.
Keep your purchase receipt for warranty coverage.
NO DEVUELVA EL PRODUCTO A LA TIENDA
Para más información, www.remingtonpowertools.com
PARA AYUDA TÉCNICA LLAME AL 1-800-626-2237
Este manual es su guía para la operación correcta y segura de la
GUARDE ESTAS INSTRUCCIONES.
Guarde su recibo de compra para cobertura de la garantía.
T
sopladora eléctrica
NE RETOURNEZ PAS LE PRODUIT AU DÉTAILLANT
FAITES LE 1 800 626-2237 POUR OBTENIR
DE L’ASSISTANCE TECHNIQUE
Pour plus de détails, visitez le www.remingtonpowertools.com.
Ce manuel vous guide pour utiliser les cisailles à
rité et de façon appropriée.
CONSERVER CES DIRECTIVES
Conservez votre reçu d’achat pour obtenir le service sous garantie.
www.remingtonpowertools.com
2
sopladora eléctrica
en toute sécu-
CONTENTS
IMPORTANT SAFETY INFORMATION .............................................................4
Before Operating Blower ..........................................................................................................4
While Operating Blower ...........................................................................................................4
Maintenance and Storage of Blower ........................................................................................ 4
PRODUCT IDENTIFICATION ............................................................................5
BLOWER ASSEMBLY ......... .............................................................................6
BLOWER OPERATION .....................................................................................7
Extension Cords .......................................................................................................................7
Operating the Blower ...............................................................................................................8
BLOWER MAINTENANCE ................................................................................9
Cleaning and Maintenance ......................................................................................................9
Servicing of Double-Inslulated Appliances ...............................................................................9
TROUBLE SHOOTING ....................................................................................10
TECHNICAL SERVICE ....................................................................................10
REPLACEMENT PARTS .................................................................................10
ENGLISH
WARRANTY INFORMATION ...........................................................................11
Thank you for purchasing this Remington brand Electric Blower. We are proud to offer this quality product to assist you in keeping
your property neat and well-groomed.
This owner’s manual provides complete instructions for safely assembling, operating, and maintaining your Blower. Read and
save these instructions. Refer to this manual each time before using your Blower.
For easy reference, record the information from the carton and Remington brand nameplate label located on the appliance.
If you have a question or problem, CALL TOLL FREE 1-800-626-2237
or visit www.remingtonpowertools.com
3
www.remingtonpowertools.com
IMPORTANT SAFETY INFORMATION
SAFETY WARNINGS
When using an electric appliance, basic
precautions should always be followed,
including the following:
WARNING: When using
blower , follow all basic safety
precautions to reduce the risk
of fi re, electric shock, and per-
sonal injury.
WARNING: This product contains chemicals known to the
State of California to cause
cancer or birth defects, or other
reproductive harm.
WARNING: To Reduce The
Risk of Electric Shock – Do not
use blower on wet surfaces.
Do not expose to rain. Store
indoors.
BEFORE OPERATING
BLOWER
READ ALL INSTRUCTIONS BEFORE
OPERATING THIS BLOWER.
1. Avoid Dangerous Environments:
• This blower is intended for indoor
or outdoor use. Do not operate blower
in rain or in damp or wet locations.
• Do not handle electric plug or
blower with wet hands.
• Do not operate blower if it is
damaged or not securely and fully
assembled.
2. Do not allow blower to be used as a toy.
Pay close attention when using blower
near children.
3. Do not use blower for any job except
that for which it is intended. Use only
as described in this manual. Use only attachments included with this blower.
4. Always wear eye protection that meets
or exceeds the requirements of ANSI
Z87.1.
5. Wear long pants and shoes when operating this blower.
6.
Provide Ground Fault Circuit Interrupter
(GFCI) protection on the circuit or outlet
to be used for blower. You may use receptacles with built-in GFCI protection
for this safety measure.
WHILE OPERATING
BLOWER
1. Stay alert. Watch what you are doing.
Use common sense.
2.
Keep hair, loose clothing, fi ngers, and all
parts of body away from openings and
moving parts.
3. Never operate this blower with defective guards or shields, or without safety
devices in place.
4. Do not abuse power cord. Never pull or
carry blower by power cord. Never yank
cord to disconnect from receptacle. To
unplug, grasp plug, not the cord. Do not
close a door on the cord. Keep power
cord from heat, oil, and sharp edges.
5. Use extra care when using blower on
stairs.
6. Do not put any object into openings. Do
not use with any opening blocked. Keep
free of dust, lint, hair, and anything that
may reduce air fl ow.
7. Disconnect blower properly. Turn off
all controls before disconnecting blower
from power supply.
8.
Do not leave blower when plugged in.
Unplug unit from outlet when not in use
and before servicing.
MAINTENANCE AND
STORAGE OF BLOWER
1. Maintain blower with care.
• Do not use with damaged cord or
plug.
• If blower is not working properly,
has been dropped, damaged, left
outdoors, or dropped into water,
have it repaired by a qualifi ed service
center.
• Keep handles dry, clean, and free
from oil and grease.
2. Check damaged parts.
• If a part is damaged, carefully check
the damaged part before using the
blower. Make sure the part will operate properly and perform its intended
function.
• Check for alignment of moving parts,
binding of moving parts, breakage of
parts, mounting, and any other condition that may affect its operation.
• A guard or other part that is dam-
aged should be properly repaired or
replaced by a qualifi ed service center
unless indicated elsewhere in this
manual.
3. Store idle blower indoors. When not
in use, store the blower and extension
cord indoors in a dry location. Store
blower above the reach of children
or in a locked area out of the reach of
children.
4. This appliance is provided with double
insulation. Use only identical replacement parts. See instructions for Servic-
ing of Double-Insulated Appliances.
This manual is your guide to safe and proper
operation of the blower.
SAVE THESE
INSTRUCTIONS
www.remingtonpowertools.com
4
PRODUCT IDENTIFICATION
A. Blower Housing
B. On/O Switch
C. Blower Tube
D. Extension Cord Retainer
E. Inlet Plug
B
FPO
C
ENGLISH
A
E
D
Specifi cations
B75150A
Input
Max. Blower Velocity
Max. Blower Air Output
Net Weight
120V, 7.5A
150 mph
180 cfm
5.5 lbs. (2.5 Kg)
5
www.remingtonpowertools.com
BLOWER ASSEMBLY
ASSEMBLING BLOWER
WARNING: To Reduce The Risk of Personal Injury or Electric
Shock – Disconnect from power source before assembling or
changing attachments.
Follow the steps below to assemble the
blower.
1. Slide the blower tube competely onto
outlet on front of blower housing with
the curved end of the blower tube facing
up. (See Figure 1)
2. Fasten with the two mounting screws.
(See Figure 2)
Figure 1 - Sliding blower tube into place Figure 2- Fasten with mounting screws.
www.remingtonpowertools.com
6
BLOWER OPERATION
IMPORTANT: This blower is for household use only.
WARNING: Read and understand this owner’s manual before
operating blower. Make certain
you read and understand all
Safety Warnings. Improper use of
this blower can result in severe
injury or death from fi re, electric
shock, or body contact with moving parts.
WARNING: To reduce the
risk of electric shock, use
only with an extension cord
intended for outdoor use,
such as SW-A, SOW-A, STWA, STOW-A, SJW-A, SJOW-A,
SJTW-A, or SJTOW-A.
EXTENSION CORDS
Make sure your extension cord is in good
condition. Inspect extension cords periodically and replace if damaged. When using
an extension cord, be sure to use one heavy
enough to carry the current your blower will
draw. An undersized extension cord will
cause a drop in line voltage resulting in loss
of power and overheating.
The table below shows the correct size extension cord to use depending on cord length and
nameplate ampere rating. If in doubt, use the
next larger gauge cord. The smaller the gauge
number, the larger the cord. To reduce the
risk of disconnection of blower from the
extension cord during operation, use the cord
hitch described in this manual.
Cord Length AWG Cord Size
25 feet
50 feet
100 feet
150 feet
18 AWG
16 AWG
14 AWG
12 AWG
wall outlet only one way. If the plug does
not fi t fully into the wall outlet, reverse the
plug. If the plug still does not fi t, contact
a qualifi ed electrician to install the proper
wall outlet. Do not change the blower plug,
extension cord receptacle, or extension cord
plug in any way.
Inspect cord often. Replace if damaged.
Connecting Extension Cord
WARNING: Fully seat the extension cord on the inlet plug of
blower. Failure to do so could lead
to overheating of blower. This
could cause a fi re that results in
personal injury to you or others.
The blower has a built-in extension cord
retainer. This cord hitch prevents accidental
disconnection of the power cord during use.
The cord hitch is molded into the lower rear
of the blower housing.
1. Plug extension cord into the inlet plug
of appliance (See Figure 3).
2. Create a loop in the extension cord and
insert the loop through the cord slot of
the blower housing (see Figure 4).
3. Pull the loop tight around the molded
cord hitch (see Figure 5).
Figure 3 - Plugging extension cord into inlet plug
WARNING: The blower can
throw debris, causing injury to
those nearby.
• Do not blow nails, bolts,
rocks, or other hard objects.
• Do not operate blower near
bystanders or pets.
• Be careful when blowing
debris from stairs, corners,
or other tight areas. Objects
can be blown back toward
operator.
• Wear approved eye pro-
tection, long pants, and
shoes while operating this
blower.
Properly assemble the blower for blower
operation (see Assembling Blower). Follow
the steps below to operate the blower.
1. Hold blower using the handle on housing. (See Figure 6)
2. When ready to start the blower, toggle
the on/off switch to the “I” setting.
3. To stop the blower, toggle the on/off
switch to the off “O” setting.
Figure 6 - On/O switch positions
ENGLISH
To reduce the risk of electric shock, this
blower has a polarized plug (one blade is
wider than the other) and will require the use
of a polarized extension cord. The blower
plug will fi t into a polarized extension cord
only one way. If the plug does not fi t fully
into the extension cord, reverse the plug. If the
plug still does not fi t, obtain a correct polarized extension cord. A polarized extension
cord will require the use of a polarized wall
outlet. This plug will fi t into the polarized
Figure 4 - Inserting extension cord loop through cord slot
Figure 5 - Pull extension cord loop tight around molded
cord hitch
7
Figure 7- Holding blower for blower operation
www.remingtonpowertools.com
BLOWER MAINTENANCE
CLEANING AND
MAINTENANCE
WARNING: Disconnect
blower from power supply
before cleaning or servicing.
Severe injury or death could
occur from fire, electrical
shock, or rotating impeller.
WARNING: When cleaning
blower:
• Do not submerse in any
liquids
• Do not use products that
contain Ammonia, Chlorine,
or abrasives
• Do not use chlorinated
cleaning solvents, Carbon
Tetrachloride, Kerosene, or
Gasoline.
Use a soft cloth dampened with a mild soap
and water mixture to wipe blower housing.
Do not spray or pour water directly onto
blower.
When not in use, store the blower and extension cord indoors in a dry location.
Figure 9 - Cleaning blower housing
SERVICING OF DOUBLEINSULATED
APPLIANCES
A double-insulated appliance is marked with
one or more of the following: The words
“DOUBLE INSULATION” or “DOUBLE
INSULATED” or the double insulation
symbol (square within a square).
In a double-insulated appliance, two systems
of insulation are provided instead of grounding. No grounding means is provided on a
double-insulated appliance, nor should a
means for grounding be added to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the
system, and should be done only by qualifi ed
service personnel. Replacement parts for a
double-insulated appliance must be identical
to the parts they replace.
www.remingtonpowertools.com
8
TROUBLESHOOTING
WARNING: Unplug blower from power source before servicing. Severe injury or death could occur from fi re, electrical shock, or rotating impeller.
Note: For additional help, visit our technical service web site at www.remingtonpowertools.com.
OBSERVED FAULT POSSIBLE CAUSE REMEDY
Motor does not run when you turn
on/o switch
1. Extension cord connection is loose 1. Check cord connection at electrical outlet
and at rear of blower.
TECHNICAL SERVICE
You may have further questions about
assembling, operating, or maintaining
this product. If so, you can visit our
Technical Service web site at www.
remingtonpowertools.com or contact
our Technical Service Department at
1-800-626-2237 (English Only). You
may also write to:
DESA Power Tools
ATTN: Technical Service
P.O. Box 90004
Bowling Green, KY 42102-9004
When contacting DESA Power Tools,
have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of receipt
for written requests).
Always specify model and serial numbers
when writing the factory.
We reserve the right to amend these
specifications at any time without notice.
The only warranty applicable is our standard written warranty. We make no other
warranty, expressed or implied.
Replacement Parts
Use the part numbers below to order replacement parts for your
blower.
You may also order parts from the"Online Outlet" at www.
remingtonpowertools.com.
Part
Item Description
Blower Tube
1
Number
121368-01
FPO
1
ENGLISH
9
www.remingtonpowertools.com
WARRANTY INFORMATION
REMINGTON BRAND ELECTRIC BLOWER
LIMITED WARRANTIES
NEW PRODUCTS
Standard Warranty
DESA Power Tools warrants this new product and any parts thereof to be free from defects in material and workmanship for a period of two (2) years from
the date of fi rst purchase from an authorized dealer provided the product has been maintained and operated in accordance with DESA Power Tools’ warnings
and instructions.
FACTORY RECONDITIONED PRODUCTS
Limited Warranty
DESA Power Tools warrants factory reconditioned products and any parts thereof to be free from defects in material and workmanship for 90 days from the
date of fi rst purchase from an authorized dealer provided the product has been installed, maintained and operated in accordance with DESA Power Tools’
warnings and instructions.
TERMS COMMON TO ALL WARRANTIES
e following terms apply to all of the above warranties:
• Always specify model number when contacting the manufacturer. To make a claim under this warranty the bill of sale or other proof of purchase must be
presented.
• is warranty is extended only to the original retail purchaser when purchased from an authorized dealer.
• is warranty covers the cost of part(s) required to restore this product to proper operating condition and an allowance for labor when provided by a DESA
Power Tools Authorized Service Center. Warranty parts must be obtained through authorized dealers of this product and/or DESA Power Tools who will
provide original factory replacement parts. Failure to use original factory replacement parts voids this warranty.
• Travel, handling, transportation, diagnostic, material, labor and incidental costs associated with warranty repairs, unless expressly covered by this warranty,
are not reimbursable under this warranty and are the responsibility of the owner.
• Excluded from this warranty are products or parts that fail or become damaged due to misuse, accidents, lack of proper maintenance, tampering, or
alterations.
• Excluded from this warranty are products purchased for commercial, industrial or rental usage.
• is is DESA Power Tools’ exclusive warranty, and to the full extent allowed by law; this express warranty excludes any and all other warranties, express
or implied, written or verbal and limits the duration of any and all implied warranties, including warranties of merchantability and fi tness for a particular
purpose to two (2) years on new products and 90 days on factory reconditioned products from the date of fi rst purchase. DESA Power Tools makes no
other warranties regarding this product.
• DESA Power Tools’ liability is limited to the purchase price of the product, and DESA Power Tools shall not be liable for any other damages whatsoever
under any circumstances including indirect, incidental, or consequential damages.
• Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
• is warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
For information about this warranty contact:
P.O. Box 90004
Bowling Green, KY 42102-9004
www.remingtonpowertools.com
1-800-626-2237 (English Only)
www.remingtonpowertools.com
Model _________________
Date Purchased _________________
10
82 Akron Road
Toronto, Ontario
M8W 1T2
1-800-561-3372
Fax: 1-800-561-8003
Loading...