Remeha Gas 610 Eco Pro - 1150 Technical Specifications
Boiler Type :
Gas 610 Eco Pro 1150
Issue Date :
July 2014
TECHNICAL SPECIFICATION SHEET
MODEL : Gas 610 ECO PRO 1150
No of SECTIONS : 2 x 9
Rated Output kW (80/60°c) :
148 - 1060
SBEM Seasonal Efficiency %: GCV(¹)
95.71
Rated Output kW (50/30°c) :
1148
Min/Max Gas pressure mbar :
17-100 NG
Weight (dry) kgs :
1025
Radiated Losses %
(2)
:
0.12
Overall Dim WxDxH mm :
1460 x 2172 x 1726**
BURNER TYPE Pre-mix
Std Fuel Available :
Natural Gas
Gas Connection size BSP :
2 x 2” (F)
Fuel Consumption M3/h :
114 Max
Acoustic level dB(A) at 1 metre (ᵌ) :
57.8
Flame Protection :
Ionisation
Nox (Dry, 0% O₂) Mg/kW :
36
Ignition :
Electronic
HYDRAULICS
Water Content ltrs :
186
Connection Size Flanged : ##
NW 80
Resistance @ 11C t mbar :
413
Std Operating Temp C :
20 - 90
Resistance @ 20C t mbar :
125
Max Operating Temp C :
90
Nom Flow Rate @ 11 C t l/s :
2 x 11.55
High Limit Set Point C :
110
Nom Flow Rate @ 20 C t l/s :
2 x 6.35
Max operating pressure bar :
7
Min Flow Rate l/s :
#
Min operating pressure bar :
0.8
Condensate Connection :
1¼” x 2
FLUE/AIR INLET
Standard = conventional
Flue diameter mm I/D :
350
Mass flue gas flow rate kgs/hr :
366 - 1814
Air inlet diameter mm I/D :
Residual Fan Duty Pa :
250 x 2
130
Flue Gas Temperature @ 80/60 °C :
30 - 80
ELECTRICAL
Power Supply :
2 x 230v – 1ph – 50hz
Fuse Rating amps :
2 x 10
Power Consumption W :
12 - 1526
Controls Voltage V :
2 x 24 (max 4va)
Modulating input V dc :
Start Current amps :
Insulation Class IP :
Run Current amps :
X1B
2 x 3.8
CONTROL OPERATION
Standard :
On/Off 0-10v dc
Open Therm
Manual o/ride
Modulating (30 - 100%)
High limit protection
Low water protection
Safety interlocks
Hours run indication
Volt free common alarm
Boiler run indication
Optional :
Main Options
Contact Sales Dept
for more details
Optimising/Compensators >
Second return >
Gas leak Detection >
Water Pressure Switch >
Air Inlet Filter >
For multiple and single boiler
65mm Flanged 80mm PN16
Option fitted to gas valve
System pressure
Connects to boiler air supply
This is a quick reference specification sheet, full details can be found in the Gas 610 Eco Pro installation and Service guide via
www.remeha.co.uk/documents
General Details
Fully condensing floor standing boiler consisting of 2 individual modules within one casing and a common flue outlet. The
boiler is supplied with electronic temperature and safety controls. Sectional cast aluminum heat exchangers, powder
coated, enamel steel casing, ultra low NOx, on/off or fully modulating (30-100%), pre - mix burner, gas/air ratio control for
maximum efficiency and minimum emissions. Boiler fitted with casters for ease of positioning within plant room. Intelligent
"abc" boiler control system c/w numerical display providing operating and service parameters. Manufactured to ISO 9001.
CE approved and supplied pre-assembled, easy to dismantle for ease of installation. NOx levels according to EN483 and
EN 15420 (EN297 A3).
(¹) In accordance with the Non Domestic Building Services Compliance Guide 2013 Edition – for use in England
(2)
At 30°c ΔT = Boiler temp – Ambient temp (without heat exchanger insulation kit)
(ᵌ) For room sealed operation
# For a continuous supply of heat the boiler requires a minimum flow of 30% of the design flow rate
## Flow 80mm, Return 65mm both Flanged NW 80 DIN 2576 – (PN16)
** Overall height to top of twin flue outlet
Ours is a policy of continuous development, we therefore reserve the right to alter specifications without prior
notification. Remeha Commercial accept no liability for any loss or damage rising from any errors or omissions that
may be inadvertently contained in this specification sheet.
Loading...