Remcor TJ250 Installation Manual
Cornelius Incorporated
500 Regency Drive
Glendale Heights, IL 60139
Telephone (630) 980-6900
Facsimile (630) 980-8511
FOR
KIT #1931
For installing Manitowoc 200/400/600 series cubers on Remcor model TJ250/TJ300 dispensers.
1. Seal ice maker to top of dispenser as follows:
A. Run a bead of RTV on the dispenser cover around the outline of the ice maker and inside edge of cov-
er opening.
B. Set ice maker onto cover and position as shown.
C. Wipe away excess RTV.
2. Fasten brackets as shown. Drill holes and install sheet metal screws provided into ice maker and dispenser
cover.
3. Follow the manufacturer’s instructions to complete the installation of the ice maker.
SHEET METAL SCREWS
F0R BRACKETS.
BRACKET
A
FRONT LID OF DISPENSER AND FRONT ICEMAKER
PANEL SHOWN REMOVED FOR INSTALLATION.
DISPENSER MODEL DIM. “A”
TJ250 1?
TJ300 3?
BRACKET
A
FRONT VIEW
ICEMAKER FRAME
FLUSH WITH FRONT OR
COVER (FRONT PANEL
OF ICEMAKER REMOVED)
EIMI Cornelius Inc; 1977--98
FIGURE 1. INSTALLA TION DETAILS
MANITOWOC 200/400/600
REV. C
Revised: November 27, 1998
March, 1977
Loading...