CAUTION ···················································································· 1-2
Specification················································································· 3-5
Block Diagram············································································· 6
Packing View················································································ 7
Packing View Part List································································· 8
Point To Point W iring Diagram··················································· 9
Exploded View·············································································· 10
Exploded View Part List······························································· 11-12
Electrical Part List ······································································ 13-24
Schematic Diagram······································································ 25-31
Printed Circuit Bo ard Diagram··················································· 32-39
IC Block Diagram········································································ 40-49
Trouble Shooting·········································································· 50
CAUTION
1:
Do not forcibly close the CD door when the power is off.
● Do not switch off the power when the CD ● To avoid damage, please don’t switch off the power until
door is open. “no disc” or “time code” is read on the display, always using
the open/close button to close the CD Door
2: To prevent destroying the anti-static protection for the mechanism, please kindly be noted of the following
important instruction for installing/disassembling the mechanism:
a. When disassembling the mechanism, please make sure to turn off power and short the Anti-static protection
welding point before removing the FFC cable.
b. When assembling the mechanism, please make sure to connect the FFC cable and PCB before removing the
Anti-static welding point, then, turn on the power.
FFC cord should be inserted in
PCB before pushing the static
solder protection aside. And
FFC cord won’t be took off till
shorten static protection when
taking Mecha apart.
1
CAUTION
3:3-1. Please be aware of wearing an anti-static ring before repairing
3-2. It is forbiddance to adjust the laser pick up VR.
3-3.To protect the mechanism; always short the Anti-static protection welding point before removing
the mechanism.
2
General Specification
1. MODEL Model RMP-2860s, Dual CD/MP3 player with wired remote control.
2. POWER SOURCE AC 115/230V, 50/60Hz, 23Watts
3. DIMENSIONS Main Unit 482(W)x 88.8(H)x 310(D)mm
Control Unit 482(W)x 132(H)x 75(D)mm
4. WEIGHT Main Unit 6.2 Kgs
Control Unit 2.4 Kgs
5. FEATURES
(1) Plays MP3 and CD discs
(2) Folder Search
(3) MP3 track listings
(4) Digital FX: BOP
(5) Seamless Loop
(6) Tempo Lock
(7) 4 Sample Bank Buttons per side (5 sec. ea bank)
(8) 10 seconds Anti Shock Protection (per side)
(9) Flip Flop (Relay playback)
(10) Pitch Control (+/-4%,+/-8%,or +/-16%) +/-100% for CD
(11) Pitch Bend
(12) Tap Sync Button
(13) Advanced cueing with track search by frame
(14) S/PDIF digital output for each player
(15) Bright VFD display with Single/Continue and Time viewing
(16) Reads CD and CD-R media
(1) System Compact Disc Digital Audio
(2) Disc loading Front loading CD player
(3) Display VFD
(4) Pitch control range Within (+/-4%,+/-8%,or +/-16%) +/-100% for CD
(5) Pitch bend +/-4%,+/-8%,or +/-16% (+/-100% for CD)
(6) Pitch accuracy +/-0.15 %
12. ENVIRONMENTAL CONDITION
(1) Operating Temperature 5 to 35 deg. C
(2) Humidity 25 to 85% RH (non-condensing)
(3) Storage Temperature -20 to 60 deg. C
NAME Q’TY TYPE NOTE
NAME Q’TY TYPE NOTE
4
General Specification
13. ACCESSORIES
(1) 2P RCA path cord L/R 2 pairs
(2) 8P cable rightangle 1 pcs (1M)
(3) Operating Instruction 1 pc
(4) AC power cord 1 pc
14. NOTES
(1) The specifications are subject to change to any improvement by negotiations in advance.
(2) The parts are subject to change to any improvement within the range of the specifications.
Joliet max. 64/64 character style
CD-ROM sector format mode-1 only
Max. number of Folders 255
Max. number of files max. 999 files (* note #1)
MPEG 1 Layer 3 standard
(ISO/IEC 11172-3), which
provides for single channel
(‘mono’) and two-channel
(‘stereo’) coding at sampling rates
of 32, 44.1 and 48kHz.
MPEG 2 Layer 3 standard
MP3 Format
(ISO/IEC 13818-3), which
provides for similar coding at
sampling rates of 16, 22.05 and
24 kHz.
MPEG 2.5 Layer 3 standard,
which provides for similar coding
at sampling rates of 8, 11.025 and
12 kHz.
Disc at Once and Track at Once
Disc Writing Method
Multi Session
Note #1: max.255 files each folder
Level 1(max. 8”/8.3” character style)
Level 2(max. 31/30 character style)
st
If the 1
Only CDDA track, If the 1
session is CDDA, you can playback
st
session is
MP3, you can playback only MP3 file.
5
Block Diagram
4
D
C
B
A
0.1
LEC
AUDIO OUT
15218
AMP & LPF
DIGITAL OU T
VFD
FADERKEY & SWITCH
321
PHOTO
INTERRU PTER
CONTROL P CB
31
2
LC75710MAX003
ROM
29C011
UI CPUVFD DRI VER
12
74595
LED DRI VER
LED
BASE P CB
ROMRAM
29LV1604641632
PLAY CONTR OL
PCM1716
MCF5249
FX DSPDAC
CD DSP
CXD3068
BUFFER
CPLD
XC9536
SM8952
3.3V
5V
7V
POWER PC B
12
POWER S WITCH
MCD-81 0
BLOCK DIAGR AM
NumberRevisionSize
B
Title
-5V
POWER S UPPLY
POWER TR ANS.
Date:20-May -2005Sheet of
File:G:\ share\BLK.DD BDrawn By:
-32V
AC3V
SERVO PCBDSP PCB
DRIVER
BA5979
-
+
M
SLED
-
+
M
CD PICK UP
DISC
DRIVE U NIT
LOADER
D
C
CD ASP
CXA2581
FOCUS
TRACKING
DRIVERS ERVO CPU
BA6218
-
+
M
LOADING
SWITCHES
B
AC CORD
1234
A
6
Packing View
4
7
5
6
9
8
1
3
10
11
2
7
Packing View Part List
REF. NO. DESCRIPTION PART NO. Q’TY REMARK
1.
2. SOFT SHEET FOR UNIT(PE,585*355+120mm,0.4t) 509-7000-168 1