Rand McNally ND 760 Fleet Edition, TND 760 User Manual

TM

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - [phone] / [phone]

TND 760

Fleet Edition

User Manual

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Support

This manual is organized to help you efficiently accomplish all your
work-related tasks. However, if you have questions that are not
addressed here, we invite you to contact us.

Call us: 1-800-641-RAND (7263)
E-mail us: fl[e-mail]
Write to us:

Rand McNally
Attn: TND™ 760 Fleet Edition Customer Support
106 Hi-Lane
Richmond, KY 40475

Safe Driving Practices:

Always use your best judgment, exercise caution and common sense
when the vehicle is in motion. Do not become distracted by the device
while driving. Minimize the amount of time spent looking at the device
while driving and use voice prompts when possible.

Do not input destinations, change settings, or access any functions
requiring prolonged use of the device controls while driving. Pull over
in a safe and legal manner before attempting such operations.

FCC Compliance Statement

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

IC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including
interference that may cause undesired operation.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Exposure to Radio Frequency Radiation.

™

760 device transmits and receives radio frequency (RF) energy through its internal

The TND
antennas. The TND
The Wi-Fi antenna is located near the center of the bottom edge of the device. TND
designed to operate with internal antennas and has no provisions for external antennas.

The TND
exposure to RF energy set by the FCC. The radiated output power of the TND
below the FCC radio frequency exposure limits. The FCC has granted an Equipment Authorization
for this model device with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model device is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID: A4C 01001A.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.

™

760 cellular antenna is located at the top of the left edge of the device.

™

760 has been designed, tested and manufactured to comply with the limits for

™

™

760 device is

760 is

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired
operation of the device.

IC CAUTION

Intentional or unintentional changes or modifications to the equipment not expressly approved by Rand
McNally could void the user’s authority to operation the equipment.

IC ATTESTATION DE CONFORMITÉ

Ce dispositif est conforme à la norme FCC Partie 15 et aux norme(s) RSS permis-exempte(s) d’Industrie
Canada. L’opération est soumise aux deux conditions suivantes:

1. Ce dispositif ne peut pas provoquer d’interférence nocive et

2. Ce dispositif doit accepter toute interference reçue, y compris les interférences qui peuvent causer
un mauvais fonctionnement du dispositif.

ATTENTION

Les changements ou modifications à l’équipement, que ce soient intentionnelles ou non, non
expressément approuvés par Rand McNally pourraient annuler l’autorisation de l’utilisateur à utiliser cet
équipement.

IC: 10199A-01001A

Table of Contents

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - [phone] / [phone]

Welcome to Your Rand McNally TND™ 760 Fleet Edition ........................2

Device Overview......................................................................................3

Getting Started .......................................................................................4

System Registration ..............................................................................4

Power On .............................................................................................5

Log On ................................................................................................5

Warning Screen ....................................................................................6

On-screen Keyboard ..............................................................................7

Status Bar ............................................................................................8

Screen Calibration ................................................................................9

TND

™

760 Home Menu ................................................................. 10

Home Menu Safe-driving Screen .........................................................11

™

TND

760 Mail ............................................................................. 12

Inbox .................................................................................................13

Open Message ...................................................................................14

Outbox ...............................................................................................15

Send ..................................................................................................16

Options ..............................................................................................17

Mail Safe-driving Screen .....................................................................17

™

TND

760 IntelliRoute® ...............................................................18

Main Menu ........................................................................................18

Truck Info ...........................................................................................19

General, Route and Map Preferences ........................................... 19-20

Warnings ...........................................................................................20

Route to Destination .................................................................... 21-22

POIs ...................................................................................................23

Trails ............................................................................................ 24-25

™

TND

760 Hours of Service .........................................................26

Summary ...................................................................................... 27-28

Duty Status ................................................................................... 29-31

Logs ............................................................................................ 32-36

DVIR ............................................................................................ 37-40

Options ........................................................................................ 41-43

Company ............................................................................................44

HOS Safe-driving Screen .....................................................................45

™

TND

760 SysInfo ........................................................................ 46

Settings .............................................................................................47

Info ....................................................................................................47

Diagnostics .........................................................................................48

SysInfo Safe-driving Screen .................................................................49

™

TND

760 Stats ............................................................................50

Driver Performance ............................................................................51

Fault Codes .......................................................................................52

Welcome to Your Rand McNally TNDTM 760 Fleet Edition

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Easy. Convenient. Accurate. Flexible. Responsive.
The Rand McNally TND
designed to improve your work life.

1. Easy. The format, the applications and the processes are easy

to understand and easy to use. Safe-driving screens simplify
tasks you may need to perform while driving.

2. Convenient. From Log on to Log off, every task you need to

perform has touch-screen convenience. From start to finish,
instructions are clear and intuitive.

3. Accurate. HOS logs are recorded with

accurate-to-the-second technology.

4. Flexible. Tools are built into the system to allow you to

manage several applications simultaneously.

5. Responsive. Buttons fit your fingers so managing the touch

screen is comfortable. Going back a step is as easy as going
forward so you can quickly arrive at where you want to be

2

TND™ 760 Fleet Edition User Manual

in the system.

™

760 Fleet Edition is

Device Overview

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - [phone] / [phone]

Front of Display

Back of Display

Power Button

USB

Use the USB to connect
a keyboard or mouse to your
TND

Home Button

Press to return to Home Menu screen.

LED Light

Lights up when unit is powered on.

Speaker

Power and OBD Access

TM

760.

Mounting Bracket

(with (3) 10-32 x 3/8” screws)

Dash Mount

To adjust the position of the
mount, turn the mount knob to
loosen tension.

Support Plate

(with (4) 10-24 x 1”screws
and (4) 10-24 nuts)

Power and OBD Cable

TND™ 760 Fleet Edition User Manual

3

Getting Started

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

TND™ 760 Fleet Edition System Registration

Register TND™ 760 Fleet Edition.

and powered on, the Registration screen should display. Enter
your truck number in the

Send test message. Select the Mail icon on the Home
Menu and tap Send. Type message subject and message
text and tap Send in the upper left hand corner. Make sure
message indicator changes from X to a green check mark.

Verify GPS.

Select
and that there are values in the Latitude and Longitude fields.

Verify J1708/1939 data.

Select the SysInfo icon on the Home Menu. Select the
Diagnostics, then the J-Bus tab. Verify that there is an

odometer value in the Engine Odometer field. Then go back
to the Home Menu and select the Stats icon, then the

4

TND™ 760 Fleet Edition User Manual

Driver Performance tab. Verify there is a value in the
Engine Odometer field on the second line in the first column.

Select the

Diagnostics, then the GPS tab. Verify GPS status is good

Once system is installed

Truck # field and tap

SysInfo

icon on the Home Menu.

Drive the truck at least .2 miles.

Register.

System Registration

The first time you power up your TND™ 760,
you will need to register your unit.

Getting Started

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 1.

TND™ 760 Power Button

Exhibit 2.

TND™ 760 Log On Screen

(a)

(b)

(c)

Power On

Press the Power button on the top right of the TND™ 760 display.

Log On

The start-up screen for the TNDTM 760 displays a log on pop-up
[Exhibit 2, (a)] and the on-screen keyboard [Exhibit 2, (b)].

• Use the on-screen keyboard to enter your Driver ID

(assigned by your company).

• Tap Submit [Exhibit 2, (c)].

Note: To log off your TNDTM 760, select the Logoff icon

on the Home Menu.

TND™ 760 Fleet Edition User Manual

5

Getting Started

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 3.

Warning Screen

Icon Definition

Wi-Fi

Cell

6

TND™ 760 Fleet Edition User Manual

Warning Screen

The Warning Screen [Exhibit 3] reminds you that using
your TNDTM 760 while driving can be distracting.
Be cautious and wise.

• Ta p Continue [Exhibit 3] to complete the logon.

Communication Status

You must have a cell or Wi-Fi connection to log on
for the first time.

• Locate the communication icon on the status bar. Icons and
their definitions are shown in the table to the left.

• Tap the keyboard button in the bottom left corner of the
keyboard if you cannot view the status bar.

Note: If you have a signal but still see errors (such as Invalid
Logon), contact your company for instructions.

Getting Started

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 4.

On-screen Keyboard

On-screen Keyboard

The TND™ 760 on-screen keyboard is quick to access and easy to use.

• All controls are on the screen.

• Large button faces fit your fingers.

(f)

To use the keyboard:

• Tap the keyboard button [Exhibit 4, (e)] on the
TND™ 760 status bar to display the keyboard.

• Tap the ABC or !@# buttons [Exhibit 4, (a)] to view alphanumeric
characters and symbols respectively. The arrow button [Exhibit 4, (c)]
on the right on the ABC screen allows you to change between upper
and lower-case letters.

• Tap the Delete button [

Exhibit 4,

(b)] to erase a character.

• Tap the space bar button to insert a space [Exhibit 4, (f)].

• Tap

Enter [

Exhibit 4,

(d)] to type on the next line.

• Tap the keyboard button [Exhibit 4, (e)] again to
hide the keyboard.

TND™ 760 Fleet Edition User Manual

7

Getting Started

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 5.

Status Bar

Icon Definition

Driver Peformance. Balloon messages appear

over the icon to help you manage your performance.
Messages are related to metrics such as over idling
and speeding.

HOS. The icon changes color according to your HOS
status. The icon is green when you are within acceptable
limits for each HOS status. The icon changes to yellow
when you are nearing violation status and to red when
you are in violation.

Mail. The icon appears on the status bar when
you have unopened mail.

Communications. The icon shows your communication
status (Wi-Fi, Cellular, No communication).

System message. System alerts appear in
balloon messages over the icon.

8

TND™ 760 Fleet Edition User Manual

Status Bar

The status bar remains visible at the bottom of every screen and gives
you access to current information about the TND™ 760.

Any status or alert icons are found on the status bar [Exhibit 5, (a)].
Icons and their definitions are shown in the table to the left.

The status bar also allows you to:

• Check your terminal time [Exhibit 5, (b)].

• Pull up the on-screen keyboard [Exhibit 5, (c)].

• Return to the Home Menu [Exhibit 5, (d)].

Note: You can also tap the Home button on the
unit to return to the Home Menu.

Getting Started

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 6.

Calibrate Screen

Screen Calibration

As soon as the TND™ 760 is running, calibrate your screen.

Recalibrate from time to time, especially if the screen “slips”
when you touch it.

To calibrate your screen:

• Press and hold the Home button for 10 seconds.

Calibration starts once button is released.

• Tap the center of the crosshairs as they appear on the calibration
screen [Exhibit 6]. There are four total.

-

Tap as close to the center of the crosshairs symbol (+) as possible.

- Use the same pressure you normally use when tapping the screen

- If you receive an error, try again.

Note:

Do NOT press and hold finger on the center of the crosshairs.

Just tap.

TND™ 760 Fleet Edition User Manual

9

TNDTM 760 Home Menu

Icon Function Icon Function

View, listen
and respond
to messages.

Pinpoint location
and find routes.

Manage
settings, tasks and
communication.

Review, create
and send logs.
Access company
information.

View driver
perfomance stats.

Log off the
TND

TM

760.

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 7.

Home Menu Screen

10

TND™ 760 Fleet Edition User Manual

Home Menu

The Home Menu [Exhibit 7] is the home screen of the TND™ 760.
The applications available to you on the TND™ 760 are
identified by icons.

The icons on the Home Menu are explained in the table to the left.

• Press the Home button to return to the Home Menu screen.

TNDTM 760 Home Menu

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 8.

Home Menu Safe-driving Screen

Home Menu Safe-driving Screen

Menu options are limited while you are driving. When your
truck is moving, the home menu safe-driving screen displays.

Note: Functionality within the Mail, HOS and SysInfo
applications is simplified while you are driving.

TND™ 760 Fleet Edition User Manual

11

TNDTM 760 Mail

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 9.

Mail Icon on Home Menu

Tab Function

Inbox Holds incoming messages.

Holds outgoing messages.

Outbox

Send

Allows you to send messages.

Helps you process assignments.

Work

Options

Displays your e-mail address

12

TND™ 760 Fleet Edition User Manual

and allows you to manage
your e-mail contacts.

Mail

Select the Mail icon on the Home Menu [Exhibit 9]
to access messages and send e-mails.

Mail opens to the Inbox tab. The tabs in Mail are explained
in the table to the left.

TNDTM 760 Mail

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 10.

Inbox Tab

Inbox

All incoming messages appear in your Inbox
of the Inbox tell you details about your messages.

Status information is clustered together [Exhibit 10, (a), (b) and (c)].

•(a). A blank space in this column means the message

has been opened. An envelope means it has not been opened.

•(b). A red exclamation point ( ! ) icon means the

message is important. A paperclip ( ) icon means the message
has an attachment.

•(c).

When you are working in another Mail tab, an
envelope icon appears on the tab indicating that you have
an unopened message.

Other columns in the Inbox tell you more about your messages
[Exhibit 10, (d), (e) and (f)].

•(d). This column tells you who sent the message.

•(e). This column tells you the subject of the message.

•(f). This column tells you when the message arrived.

-The time displays for messages that arrived on that current day
(based on your terminal time).

-The date displays for messages that arrived on previous days.

[Exhibit 10]

TND™ 760 Fleet Edition User Manual

. Special features

13

TNDTM 760 Mail

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 11.

Open Message Screen

(a)

(c) (b)

14

TND™ 760 Fleet Edition User Manual

(d)

Open Message

Select a message to open it [Exhibit 11].

Four action buttons are available once a message is open.

• (a). Back returns you to the Inbox.

• (b). Play lets you listen to the message.

• (c). Reply lets you send a response to the message.

• (d). Delete lets you delete the open message.

Your Inbox holds 200 messages. When more messages arrive,
the oldest messages in your Inbox are automatically deleted.

Personal E-mail Access

• If your carrier has enabled personal e-mail access, you can save up to
5 personal e-mail addresses to communicate with while on the road.

• Personal e-mails are color-coded blue in your Inbox so you can identify
them quickly. The color coding remains after the e-mail is read.

• You can view your assigned e-mail address by selecting the Options
tab on the Mail screen and tapping the View E-mail Address button.

TNDTM 760 Mail

For Sales Information Please Contact

RoadTrucker Inc

(www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

[phone] / [phone]

Exhibit 12.

Outbox Tab

(a)

(b) (c) (d)

Outbox

All outgoing messages appear in your Outbox [Exhibit 12]. Special
features of the Outbox tell you details about your messages.

Your Outbox holds 50 messages. When you have sent more than
that, the oldest messages in your Outbox are automatically deleted.

• (a). A green check mark ( ) icon means the message has been

sent. An orange arrow ( ) icon means the message is waiting
to be sent. A red X ( ) icon means the message has not yet
been sent.

Other columns in the Outbox tell you more about your messages
[Exhibit 10, (b), (c) and (d)].

• (b). This column tells you who received the message.

• (c). This column tells you the subject of the message.

• (d). This column tells you when the message arrived.

-The time displays for messages that arrived on that current day

(based on your terminal time).

-The date displays for messages that arrived on previous days.

TND™ 760 Fleet Edition User Manual

15