RANDELL FX-2WSFSS User Manual
Iceless Fish Processing Table model FX-2WSFSS
Description:
The Randell Iceless Fish Table is the industry’s first total refrigerated solution that allows the operator to manage temperature
throughout the steps from raw fish to portioned fish and staging
for cooking. This is accomplished by utilizing the technology of FX
for the bulk storage; the experience of Randell refrigerated designs
in the cooled work-surface and the industry leading prep rail technology that has made Randell the #1 choice in prep tables for the
staging / holding section. You can specify a array of options and
accessories to make this system as integrated as you would like.
No one helps the seafood operator manage their food costs better than Randell while eliminating the costs, logistics and mess
of using ice.
Specifications:
CABINET EXTERIOR: Unit top and raised rail will be formed from
four piece 16 gauge stainless steel with a 2.625” nosing/top
turndown. The raised refrigerated rail will be mechanically cooled
and shall be provided with one single opening to allow flexible pan
configurations. The interior of the rail will be constructed of threepiece construction with coved corners for easy cleaning. Rail will
hold 6” deep pans - not included. The pans will set on an integral
recessed pan ledge (1” at front and 3” at rear) making clean-up
easy without requiring the removable of any pan supports. The unit
provided with hinged removable stainless steel covers. Exterior
ends are finished in stainless steel. New hinged louver for easier
cleaning of the coil and draining the rail. Unit mounted on 6” legs.
REFRIGERATION SYSTEM: The system will utilize R-404a refrigerant
and be provided with a hot gas condensate evaporation system.
Dual refrigeration system with independent controls for the base
and the rail. The base will have a blower coil with a dedicated
metering device and solenoid valve allowing the thermostatic
control to independently control the base temperature. The raised
mechanically cooled rail will be controlled utilizing an expansion
valve metering device with its own solenoid valve and thermostat.
An on/off switch, located directly behind the hinged louver, is
provided as standard to allow the rail to be shut off independently
of the cooled work surface. A pressure control is provided to
monitor the dual systems performance.
TEMPERATURE STATEMENT: The rail is designed to hold 41˚F or
lower during operation while the work surface is designed to
maintain approximately 45˚F, reducing the surfaces natural heat
sink and keeping the product colder (fresher) during processing.
model RPC-2 shown
Refrigerated Storage:
REFRIGERATION SYSTEM: The FX Series uses a patented in drawer cooling
system that directs 100% of the cooling inside the insulated and removable
drawer Insert (see below). The evaporator coil is mounted horizontally above
the drawer Insert with an integral gasket that seals against the insulated
drawer compartment when closed. The refrigeration system operates only
when the drawer is closed, efficiently managing the airflow while reducing
energy and humidity build-up. Press-fit removable gasket with magnet-tomagnet seal is standard.
REMOVABLE INSULATED INSERT: This exclusive design allows full removal
of the refrigerated compartment for cleaning or pre-loading. Made of high
impact ABS plastic with high density polyurethane insulation. Provides
unparalleled insulation value with no air gaps.
TEMPERATURE STATEMENT: The unit is provided with a electronic
temperature controller that can be easily adjusted by the operator to
any temperature setting between 0°F (freezer) operation up to 40°F
(refrigerator).
Standard Features:
• (2) FX Drawers for storage (freezer or refrigerator)
• Mechanically cooled work surface
• Mechanically cool elevated rail
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Options & Accessories:
Hand sink
Prep sink with cleaning trough at rear
Tare scale shelf
Cleaning faucet and hose reel
Randell Iceless Fish Processing Table
PP SPECFX2WSFSS Rev. B
Revised 10/10
Model FX-2WSFSS
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2010 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Loading...