Rain Bird Golf Master Parts Book

Rain Bird Golf Master Parts Book

Golf Master Parts Book

Effective Date: March 2020

 

Catalog Number

Index

000

Catalog

 

Number

Description

PRELIMINARY

000

Index

001

Introduction & Instructions

 

 

ROTORS

 

002

Eagle’s Nest™ Rotor Adaptors For 47/51DR Series Rotors

003

Eagle™ 351

004

Eagle™ 500 Internal Assembly

005

Eagle™ 550 Internal Assembly

006

Eagle™ 700 Internal Assembly

007

Eagle™ 750 Internal Assembly

008

Eagle™ 900 Internal Assembly

009

Eagle™ 950 Internal Assembly

010

Eagle™ 500 / 550 / 700 / 750 Series

011

Eagle™ 900 / 950 / 1100 / 1150 / 115-E Series

012

Eagle™ 1100 Series Internal Assembly

013

Eagle™ 1150 Series Internal Assembly

014

Rain Bird 700 Internal Assembly

015

Rain Bird 551 / 751 Internal Assembly

016

Rain Bird 552 / 752 Internal Assembly

017

Rain Bird 752 Internal Assembly

018

Rain Bird 702 Internal Assembly

 

MANUAL VALVES

019

SH-0 / SH-0-BSP / SH-1 / SH-2 / SH-2-BSP / SH-3

020

One-Piece Quick Coupler Valves 3, 5, And 7 Series

021

Two-Piece Quick Coupler Valves 33 And 44 Series

Catalog

 

Number

Description

ELECTRIC VALVES

022

100PGA / 150PGA / 200PGA Series

023

100/150/200 PE, PESB AND PESB-R Series

024

100EFB-CP / 125EFB-CP / 150EFB-CP / 200EFB-CP Series

025

300 BPE and BPES Series

026

PRS, PRS-2, PRS-B, PRS-D

 

CONTROLLERS AND INTERFACES

027

Controller Assembly With Pedestal (PAR+ES)

028

Integrated Control Interface (ICI)

029

Maxi Remote Location Kit

030

The Freedom System™

 

SWING JOINTS

031

Standard Swing Joint Assembly

032

Standard Swing Joint Assembly With Acme Inlet

033

Triple Top Swing Joint Assembly

034

Triple Top Swing Joint Assembly With Acme Inlet

 

ACCESSORIES AND TOOLS

035

Adapters

036

Accessories - Tools

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

1 of 1

 

Introduction & Instructions

Catalog Number

 

001

Rain Bird is committed to providing you with the best parts and after sales service programs in the irrigation industry. This Master Parts Book represents that commitment by supplying you with current information so that you can obtain replacement parts for your Rain Bird products. We hope you will find this book useful as you purchase and use Genuine Rain Bird Parts.

HOW TO USE THE MASTER PARTS BOOK (SEE NEXT PAGE FOR EXAMPLE)

The Master Parts Book was designed to be easy. There is a simple index which allows you to quickly locate the part list you need. Each part list has a simple format. Just follow these guidelines and you should easily find the part you want.

1.First look at the picture to identify the part in which you are interested. Note the reference number of that part.

2.Look at the headings on the part list matrix and find the product model which you need parts for. Look down the column until you reach the row with the reference number of the part you previously identified. At that intersection is the part number you need.

3.If the part number you need IS NOT IN BRACKETS ( ) then the part can be purchased by itself. However, if the part IS IN BRACKETS ( ) then that part is either not sold or it must be purchased in a kit or an assembly.

4.A part sold in an assembly will have its description indented under the assembly that is available. A part sold in a kit will have a footnote (usually a letter) beside its description. Look to the bottom of that page or the last page in the list for the kit number.

HOW TO ORDER PARTS (Rain Bird Distributors Only)

Rain Bird distributors can order parts in a number of ways. Orders for parts should be placed by using :

1. Self Service at www.rainbird.com/distributor For new Self Service accounts, contact Customer Service.

2.Faxing to Customer Service

3.Electronic Data Interchange (EDI)

Website

Customer Service Telephone

Customer Service Fax

rainbird.com/golf

800-282-1933

800-843-4162

HOW PARTS ARE SHIPPED (Rain Bird Distributors Only)

Rain Bird parts are shipped in one of two ways:

1.Regular parts orders are shipped like your normal Rain Bird orders with the same processing times and freight policies. They can, however, include both parts and whole goods.

2.Quick Parts Service (QPS) orders are special parts only orders that ship quickly to your door. We process them in one day and ship them out in one to

two business days depending on your location. Domestic customers receive prepaid freight on orders over $ 250.00 net. There is NO MINIMUM purchase on QPS parts orders. Most QPS orders are received at your door within 2 to 5 days. We encourage you to use QPS whenever you need quick delivery.

QPS - The Quick Way to Receive Rain Bird Parts!

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

001 Catalog Number

Introduction & Instructions

(THIS PAGE IS AN EXAMPLE ONLY, DO NOT USE FOR REFERENCING PARTS.)

3

 

 

6

4

5

 

 

7

9

8 Example 1

10

 

Example 2

11

Example 2 – You need the Bearing Guide Assembly for Low Flow on a 751-Block Rotor. As before, find the reference number for the Bearing Guide on the picture (# 10). Next, find the 751B column and

go down the list to reference item #10. The part you need is (211263). Since part 211263 is in brackets it is not available by itself, but may be in a kit or assembly. Look at the part’s description to see if it is indented below an assembly. In this case the part is not available, please contact Rain Bird Golf for assistance with this item.

Example 1 – You need a 551-E FC-PC Arm-Lever Assembly. First, find the reference number for the assembly in the picture (# 8). Second, look at the headings on the parts list matrix and find the model number 551-E. Third, go down the 551-E column to reference number #8. The part number you need is 214752 (shared across all internal models).

Ref. Part Description

Qty.

551-E /751-E

551-S/H /751-S/H

551B/751B

SNAP RINGS

 

 

 

 

1

Snap Cover

1

21192101

21192101

21192101

 

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

 

2

Rain Bird Internal Assembly (A) (B)

1

214751xx

214751xx

214651xx

 

 

 

 

 

NOZZLE HOUSING AND NOZZLES

 

 

 

 

3

Nozzle Housing Screw

2

214754

214754

214754

4

Nozzle plug

1

211593

211593

211593

5

Nozzle Housing Less Nozzle

1

213760

213760

213760

6

Standard Range Nozzle and O-Ring Assembly (C)

1

213750xx

213750xx

213750xx

6

Short Throw Range Nozzle and O-Ring Assembly (D) 1

213751xx

213751xx

213751xx

7

O-Ring (Cover, Adjust, & Lever)

2

211236

211236

211236

8

FC/PC Arm-Lever Assembly

1

214752

214752

214752

9

Arc Adjust Stem

1

210420

210420

210420

 

 

 

 

 

BEARING GUIDE / MOTOR ASSEMBLY

 

 

 

 

10

Bearing Guide Assembly, Standard

1

211147

10

Bearing Guide Assembly, Low Flow

1

(211263)

(211263)

11

Bearing Guide O-ring

1

211242

211242

211242

12

FC-PC Trip Rod

1

214753

214753

214753

13

Rain Bird 751 Riser Motor Assembly

1

21475100

21475100

21475100

14

Stator/Screen Kit

1

21040301

21040301

21040301

15

SAM Screen Kit Block Models

1

211292

211292

211292

19

Pop-up Seal (White)

1

(201399)

(201399)

(201399)

 

 

 

 

 

 

12

13

Example 3 – You need new screw for a Two-Piece Quick Coupler Valve 44 Series. Find the reference number for the screw (#17) and look at the matrix to find the part or reference number. Since these references are in brackets look at their descriptions below or reference the image to see if there are any footnotes (usually a letter). If there are footnotes look to the bottom of the matrix to find the kit or notation. In this case the kit (A) is in the matrix and contains the screw.

 

33RC

33DRC

44RC

 

33LRC

33DLRC

44LRC

Ref Part Description

33NP

33DNP

44NP

 

 

VALVE ASSEMBLY

 

 

 

 

 

9

Upper body

(200204)

(200204)

(200208)

 

 

10

Screw

(200187)

(200187)

(200187)

 

 

11

Flange

(200188)

(200188)

200209

 

 

12

Cage

(200503)

(200503)

(200210)

 

 

13

Spring

(200502)

(200502)

200211

 

14

14

Rubber disc (Buna-N)

 

 

(200213)

 

15

Retainer

 

 

(200214)

 

15

 

 

A

16

Washer

 

 

(200215)

16

17

Screw

 

 

(205806)

 

A

Repair kit

(204146)

(204146)

203747

 

17

3

(33 series includes 12 and 13)

 

 

 

 

 

 

 

 

(THIS PAGE IS AN EXAMPLE ONLY, DO NOT USE FOR REFERENCING PARTS.)

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

 

Rotor Adapter

 

 

Catalog Number

 

 

 

002

 

 

 

 

EAGLE’S NEST™ ROTOR ADAPTORS

 

 

 

 

FOR 47/51DR SERIES ROTORS

 

 

 

Ref.

Part Description

Qty.

Part No.

2

 

 

 

1

EAGLE'S NEST Rotor Adaptors

1

211579

 

 

 

 

 

 

 

 

 

 

2

Screw, 3/4" Self Tapping #10 Thd.

3

(211487)

 

 

3

Cover, Eagle's Nest

1

(211482)

 

 

4

Snap Ring, Eagle's Nest 47/51

1

21113301

 

 

5

Adaptor, Eagle's Nest

1

 

 

 

6

Seal, U-cup (Red)

1

(211239)

 

 

 

 

 

 

 

 

3

4

1

5

6

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 1

 

 

Catalog Number

Part/Full Circle Rotor

003

EAGLE™ 351

 

1

3

4

2

5

6

Ref.

Part Description

Qty.

All Models

SNAP RINGS

 

 

1

Snap Cover, Black

1

21192101

1

Snap Cover, Yellow

1

21192102

1

Snap Cover, White

1

21192103

1

Snap Cover, Purple

1

21192104

 

 

 

INTERNAL ASSEMBLY

 

 

2

Internal Assembly (Does not include nozzle)(A)(B) 1

21291101

 

 

 

NOZZLES

 

 

3

Nozzle Kit (C)

1

212913xx

 

 

 

BEARING ASSEMBLY

 

 

4

Bearing Guide O-Ring

1

211242

 

 

 

FILTER ASSEMBLY

 

 

5

Screen and Check Valve Assy Kit

1

212914

 

 

 

 

CASE

 

 

 

6

Case (NPT)

1

(21148901)

6

Case (BSP)

1

(21148902)

6

Case (ACME)

1

21148903

 

 

 

ACCESSORIES/TOOLS

 

 

Support Tool

1

232693S

Flat-Head Rotor Tool

1

Y05100

(A)Order nozzle kit if necessary - Part#212913xx

(B)For Non-potable applications use Standard Part and Purple Snap Ring - Part #21192104.

(C)Specify Nozzle Kit when Ordering - XX = 02 (Includes 18M, 26M, 30M and 36M Nozzles); 22 (Includes 18S, 22S and 26S Nozzles); 36 (Includes 30S, 36S, and 40 Nozzles); 48 (Includes 44, 48, and 54 Nozzles).

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

1 of 1

 

Full Circle Rotor

Catalog Number

 

004

EAGLE™ 500 INTERNAL ASSEMBLY

 

 

3

4

 

 

5

13

14

 

 

 

6

8

 

 

 

7

 

 

9

 

 

10

 

15

 

 

11

 

16

 

 

12

 

 

1

 

 

or

 

 

2

 

 

 

 

17

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

Full Circle Rotor

004

EAGLE™ 500 INTERNAL ASSEMBLY

 

Ref.

Part Description

Qty.

500-E/IC

500-S/H

500B

SNAP RINGS

 

 

 

 

1

Snap Cover

1

see chart

see chart

see chart

2

Rubber Cover Kit

1

(212551)

(212551)

(211355)

 

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

 

3

Internal Assembly (A)

1

214751XX

211580xx

(B)211580xx

 

 

 

 

 

COVER ASSEMBLY

 

 

 

 

4

Self-Tapping Screw

2

210974

210974

210974

5

Housing Cover

1

(211282)

(211282)

(211282)

6

Screw O-Ring

2

211236

211236

211236

 

 

 

 

 

NOZZLES

 

 

 

 

7

Nozzle Housing - Black (C)

1

21035602

21035602

21035602

8

Range Nozzle Assembly (A)

1

213500xx

213500xx

213500xx

9

Retract Seal

1

210354

210354

210354

15

Stator / Screen Kit

1

21040301

21040301

21040301

16

Seal-a-Matic Sreen Assy

1

211292

BEARING / RISER-MOTOR ASSEMBLY

 

 

 

 

10

Nozzle Housing O-Ring

1

210366

210366

210366

11

Bearing Guide Assy, STD

1

211147

11

Bearing Guide Assy, LO-FLOW (D)

1

211263

211263

12

Bearing Guide O-Ring

1

211147

211147

211147

13

Riser Motor Assembly

1

21470000

21470000

21470000

14

Pop-up Seal (White)

1

210399

210399

210399

 

 

 

 

 

 

17

CASE ASSEMBLY See Catalog No. 010

 

 

 

 

Ref.

KITS & Accessories

Qty.

P/N

1

Snap-Cover, Black

 

21192101

1

Snap-Cover, Yellow

 

21192102

1

Snap-Cover, White

 

21192103

1

Snap-Cover, Purple (Non-Potable)

 

21192104

 

 

 

 

5

Cover, Yardage Marker Blank (Black)

 

(21175201)

 

 

 

 

-

Sod Cup Kit

 

#212613

 

 

 

 

(A)Specify Nozzle Size when ordering. Available in # 51, 52, 53, 54.

(B)Also reqires Seal-a-Matic Sreen Assy Part # 211292

(C)For non-potable applications use standard part and purple snap ring, part # 21192104

(D)The LO-FLOW Bearing Guide #211263 may also be used on the 500 Series Electric rotor

(E)For smooth case rotors use part # 211602

Stator / Poppet Configurations

Color

Number

Electric Pressure Setting

Hyd,

 

 

 

psi (bars)

 

SAM,

 

 

60 (4,1)

70 (4,8) 80 (5,5)

100 (6,9)

B

 

 

 

 

 

 

 

Black

#51

S4

S4

S4

S4

S4

Beige

#52

S4

S4

S4

S4

S4

Gray

#53

S4

S4

S4

S4

S4

Red

#54

S8

S8

S8

S8

S8

 

 

 

S4 = Stator with 4 Holes

S8 = Stator with 8 Holes

 

Stator with 4 Holes

 

Stator with 8 Holes

 

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

Full Circle Rotor

Catalog Number

 

005

EAGLE™ 550 INTERNAL ASSEMBLY

 

 

 

3

 

4

 

 

 

5

 

16

 

 

 

 

6

8

15

 

 

 

7

 

 

 

 

 

9

 

 

 

10

 

 

 

11

 

17

 

12

 

 

 

 

 

18

 

13

 

 

1

 

 

 

or

14

 

 

 

 

 

2

 

 

 

 

 

 

19

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

Part Circle Rotor

005

EAGLE™ 550 INTERNAL ASSEMBLY

 

Ref.

Part Description

Qty.

550-E/IC

550-S/H

550B

SNAP RINGS

 

 

 

 

1

Snap Cover

1

21192101

21192101

21192101

2

Rubber Cover Kit

1

(212551)

(212551)

(211355)

 

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

 

3

Internal Assembly (A)

1

214551xx

(B) 214551xx

(B) 214751xx

 

 

 

 

 

COVER ASSEMBLY

 

 

 

 

4

Self-Tapping Screw

2

210974

210974

210974

5

Housing Cover

1

(211281)

(211281)

(211281)

6

Screw O-ring

2

211236

211236

211236

 

 

 

 

 

NOZZLES

 

 

 

 

7

Nozzle HousingBlack (C)

1

21035601

21035601

21035601

8

Range Nozzle Assembly (A)

1

213500xx

213500xx

21500-xx

9

Retract Seal (D)

1

210354

210354

210354

17

Stator / Screen Kit

1

21040301

21040301

21040301

18

Seal-a-Matic Screen Assy

1

211292

BEARING / RISER-MOTOR ASSEMBLY

 

 

 

 

10

Nozzle Housing O-Ring

1

210366

210366

210366

11

Arc Adjustment Stem O-Ring

1

211236

211236

211236

12

Arc Adjustment Stem

1

210420

210420

210420

13

Bearing Guide Assy, STD

1

211147

13

Bearing Guide Assy, LO-FLOW

1

(211263)

(211263)

14

Bearing Guide O-Ring

1

211242

211242

211242

15

Riser Motor Assembly

1

(210535)

(210535)

(210535)

16

Pop-up Seal (White)

1

210399

210399

210399

 

 

 

 

 

20

CASE ASSEMBLY See Catolog No. 010

 

 

 

(A)Specify Nozzle Size when ordering. Available in # 51, 52, 53, 54.

(B)Also requires Seal-a-Matic Screen Assy Part # 211292

(C)For non-potable applications use standard part and purple snap ring part # 21192104

(D) Obsolete as of year end 2016.

Ref.

KITS & Accessories

Qty.

P/N

1

Snap-Cover, Black

 

21192101

1

Snap-Cover, Yellow

 

21192102

1

Snap-Cover, White

 

21192103

1

Snap-Cover, Purple (Non-Potable)

 

21192104

 

 

 

5

Cover, Yardage Marker Blank (White)

(21199603)

 

Cover, Yardage Marker Blank (Black)

(21199601)

 

 

 

Diffuser Screw Kit (#52 & 53 only)

 

(21196452)

(Includes modified Range Nozzle)

 

(21196453)

7

Nozzle Housing, Drilled & Tapped

1

 

8

Range Nozzle Assy, Modified

1

 

Diffuser Screw (not shown)

1

 

5

Cover, (Notched)

1

 

9

Retract Seal

1

 

6

Screw O-Ring

2

 

 

 

 

 

-

Sod Cup Kit

 

212613

 

 

 

 

Stator / Poppet Configurations

Color

Number

Electric Pressure Setting

Hyd,

 

 

 

psi (bars)

 

SAM,

 

 

60 (4,1)

70 (4,8) 80 (5,5)

100 (6,9)

B

 

 

 

 

 

 

 

Black

#51

S4

S4

S4

S4

S4

Beige

#52

S4

S4

S4

S4

S4

Gray

#53

S4

S4

S4

S4

S4

Red

#54

S8

S8

S8

S8

S8

 

 

 

S4 = Stator with 4 Holes

S8 = Stator with 8 Holes

 

Stator with 4 Holes

Stator with 8 Holes

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

Full Circle Rotor

Catalog Number

 

006

EAGLE™ 700 INTERNAL ASSEMBLY

 

3

4

 

5

17

 

6

14

8

7

 

9A

 

9B

 

10

 

11

15

12

 

 

16

13

 

1

 

or

 

2

18

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

Full Circle Rotor

006

EAGLE™ 700 INTERNAL ASSEMBLY

 

Ref. Part Description

Qty.

700-E/IC

700-S/H

700B

 

Ref. KITS & Accessories

Qty.

P/N

SNAP RINGS

 

 

 

 

1

Snap Cover

1

21192101

21192101

21192101

2

Rubber Cover Kit

1

(212551)

(212551)

(211355)

 

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

 

3

Internal Assembly (A)(B)(C)

1

(E) 214700xx

(E) 214700xx

(E) 214600xx

 

 

 

 

 

COVER ASSEMBLY

 

 

 

 

4

Self-Tapping Screw

2

210974

210974

210974

5

Housing Cover

1

213710

213710

213710

6

Cover Screw O-Ring

2

211236

211236

211236

 

 

 

 

 

NOZZLES

 

 

 

 

7

Dual Spreader Nozzle Housing - Black (B)(D)

1

213710

213710

213710

8

Range Nozzle Assembly (A)

1

213700xx

213700xx

213700xx

9A

Mid-Range Spreader Nozzle

1

 

See Diagram Below

9B

Close-in Spreader Nozzle

1

 

See Diagram Below

10

Retract Seal

1

210354

210354

210354

15

Stator/Screen Kit

1

21040301

21040301

21040301

 

-Stator

1

 

-Poppet

1

 

-Screen

1

16

Seal-a-Matic Screen Assy

1

211292

 

 

 

 

 

BEARING / RISER-MOTOR ASSEMBLY

 

 

 

 

11

Nozzle Housing O-Ring

1

210366

210366

210366

12

Bearing Guide Assy, STD

1

211147

12

Bearing Guide Assy, LO-FLOW (E)

1

(211263)

(211263)

13

Bearing Guide O-Ring

1

211242

211242

211242

14

Riser Motor Assembly

1

21470000

21470000

21470000

17

Pop-up Seal (White)

1

210399

210399

210399

 

 

 

 

 

 

18

CASE ASSEMBLY See Catolog No. 010

 

 

 

 

1

Snap-Cover, Black

21192101

1

Snap-Cover, Yellow

21192102

1

Snap-Cover, White

21192103

1

Snap-Cover, Purple (Non-Potable)

21192104

 

 

 

5

Cover, Yardage Marker Blank (Black)

(21175201)

 

 

 

-

Sod Cup Kit

212613

 

 

 

 

Mid-Range nozzle (9A)

Close-In nozzle (9B)

Dual Spreader:

#28-36 Blue

Always Black With

 

Part No.: 211562

White Cascade Insert

 

#40-48 Black w/o insert

Part No.: 211452

 

Part No.: 211417

 

Cascade:

Plugged

With White Cascade

 

Part No.: 211593

Insert Always Black

 

 

Part No.: 211452

Original:

Black w/o insert

Plugged

 

Part No.: 211417

Part No.: 211593

(A)Specify Nozzle Size when ordering. Available in # 28, 32, 36, 40, 44, 48.

(B)For Non-Potable applications, use standard part and purple snap ring (Part # 21192104)

(C)Replacement Internal Assembly - upgrade to Rain Bird 700

(D)Replacement Dual Spreader Nozzle Housing upgrade to Rain Bird 700 Nozzle Housing. Requires two (2) 700/751 Nozzle Housing Screws (Part # 214754).

(E)Also requires Seal-a-Matic™ Screen Assy (Part # 211292).

Part #

Description

211562

Spreader Nozzle - Blue

 

 

213705

Spreader Nozzle - Blue W/Diffuser

 

 

211417

Spreader Nozzle - Black

211452

Spreader Nozzle - Black W/Diffuser

 

 

213701

Spreader Nozzle - Green

 

 

212291

Spreader Nozzle - Red

213702

Spreader Nozzle - Orange

 

 

211593

Spreader Nozzle Plug

 

 

213703

White Diffuser Insert - 500/550/700/750/751

Stator / Poppet Configurations - Dual Spreader & Cascade

 

Color

Number

Electric Pressure Setting

 

Hyd,

 

 

 

 

psi (bars)

 

SAM,

 

 

 

60 (4,1)

70 (4,8)

80 (5,5)

100 (6,9)

B

 

White

#28 / 14C

SPC

SPC

 

SPC

SPC

SPC

 

Blue

#32 / 16C

SPO

SPO

 

SPO

SPO

SPO

 

Yellow

#36 / 18C

SPO

SPO

 

SPO

SPO

SPO

 

Orange

#40 / 20C

SNP

SNP

 

SNP

SNP

SNP

 

Green

#44 / 22C

SNP

SNP

 

SNP

SNP

SNP

 

Black

#48 / 24C

N/R

SNP

 

SNP

SPR

SNP

 

SPC = Stator with Poppet Closed

SO

= Screen Only

 

SPO = Stator with Poppet Open

SPR

= Spacer and Screen

 

SNP = Stator No Poppet

 

N/R

= Not a Recommended Pressure

 

 

 

 

 

 

and Nozzle Setting

 

 

Stator with Poppet Closed

 

 

Stator with Poppet Open

 

 

Should be tight when snapped in

Should be loose when snapped in

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

Part Circle Rotor

Catalog Number

 

007

EAGLE™ 750 INTERNAL ASSEMBLY

 

 

 

3

 

4

 

 

 

5

15

16

 

 

 

6

8

 

 

7

 

 

 

9

 

 

 

10

 

 

 

11

 

17

 

 

 

 

12

 

 

 

 

 

18

 

13

 

 

1

 

 

 

or

14

 

 

 

 

 

2

 

 

 

 

 

 

19

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

Part Circle Rotor

007

EAGLE™ 750 INTERNAL ASSEMBLY

 

Ref.

Part Description

Qty.

750-E/IC

750-S/H

750B

SNAP RINGS

 

 

 

 

1

Snap Cover

1

21192101

21192101

21192101

2

Rubber Cover Kit

1

(212552)

(212552)

(211355)

 

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

 

3

Internal Assembly (A)

1

(E) 214751xx (E) 214751xx (E) 214751xx

 

 

 

 

 

COVER ASSEMBLY

 

 

 

 

4

Self-Tapping Screw

2

210974

210974

210974

5

Housing Less Nozzle (D)

1

213760

213760

213760

6

Cover Screw O-Ring

2

211236

211236

211236

 

 

 

 

 

NOZZLES

 

 

 

 

7

Dual-Spreader Nozzle Housing(B)(C)

1

21198201

21198201

21198201

8

Range Nozzle Assembly (A)

1

213750xx

213750xx

213750xx

9

Retract Seal

1

210354

210354

210354

17

Stator/Screen Kit

1

21040301

21040301

21040301

 

-Stator

1

 

-Poppet

1

 

-Screen

1

18

Seal-a-Matic Screen Assy

1

211292

BEARING / RISER-MOTOR ASSEMBLY

 

 

 

 

10

Nozzle Housing O-Ring

1

210366

210366

210366

11

Arc Adjustment Stem O-Ring

1

211236

211236

211236

12

Arc Adjustment Stem

1

210420

210420

210420

13

Bearing Guide Assy, STD

1

211147

13

Bearing Guide Assy, LO-FLOW

1

211263

(211263)

14

Bearing Guide O-Ring

1

211242

211242

211242

15

Riser Motor Assembly

1

21475100

21475100

21475100

16

Pop-up Seal (White)

1

210399

210399

210399

 

 

 

 

 

 

19

CASE ASSEMBLY See Catolog No. 010

 

 

 

 

Ref.

KITS & Accessories

Qty.

P/N

1

Snap-Cover, Black

 

21192101

1

Snap-Cover, Yellow

 

21192102

1

Snap-Cover, White

 

21192103

1

Snap-Cover, Purple (Non-Potable)

 

21192104

 

 

 

5

Cover, Yardage Marker Blank (White)

(21199603)

5

Cover, Yardage Marker Blank (Black)

(21199601)

 

 

 

Diffuser Screw Kit, Dual Spreader (B)

 

212295

(Without Nozzle)

 

 

7

Nozzle Housing, Drilled & Tapped

1

 

Diffuser Screw (not shown)

1

 

5

Housing Cover (Notched)

1

 

9

Retract Seal

1

 

6

Cover Screw O-Ring

2

 

 

 

 

EAGLE’S TAIL KITS

 

 

Dual-Spreader (without nozzle) (Black)

212287

7

Housing, Nozzle, Drilled in back

1

 

Close-in Spreader Nozzle, 700

1

211452

5

Housing Cover

1

 

9

Retract Seal

1

 

6

Cover Screw O-Ring

2

 

EAGLE's Tail Instruction Sheet

1

 

 

 

 

 

-

Sod Cup Kit

 

212613

 

 

 

 

(A)Specify Nozzle Size when ordering. Available in # 28, 32, 36, 40, 44, 48.

To replace cascade nozzles (#14-24), double the nozzle number and upgrade to dual spreader nozzles. (eg. for #18 cascade, order #36 dual spreader.)

(B)For non-potable applications use standard part and purple snap ring (Part # 21192104)

(C)For casade nozzle housing upgrade to Dual-Spreader nozzle housing - Part # 21198201 and Nozzle - part # 213750xx

(D)Replacement housing - upgrade to Rain Bird 751.

(E)Also requires Seal-a-Matic™ Screen Assy (Part # 211292).

Stator with Poppet Closed

Stator with Poppet Open

Should be tight when snapped in

Should be loose when snapped in

 

 

750 Dual-Spreader Nozzle

750 Cascade Nozzle

 

 

 

 

 

 

 

(obsolete)

 

Stator / Poppet Configurations - Dual-Spreader & Cascade

 

Color

Number

 

Electric Pressure Setting

Hyd,

 

 

 

 

psi (bars)

 

SAM,

 

 

60 (4,1)

70 (4,8)

80 (5,5)

100 (6,9)

B

White

28/14C

SPC

 

SPC

 

SPC

SPC

SPC

Blue

32/16C

SPO

 

SPO

 

SPO

SPO

SPO

Yellow

36/18C

SPO

 

SPO

 

SPO

SPO

SPO

Orange

40/20C

SNP

 

SNP

 

SNP

SNP

SNP

Green

44/22C

SNP

 

SNP

 

SNP

SNP

SNP

Black

24C

SNP

 

SPR

 

SPR

SPR

SNP

Black

#48

SPR

 

SPR

 

SPR

SPR

SNP

SPC = Stator with Poppet Closed

 

SPR

= Spacer and Screen

 

SPO = Stator with Poppet Open

 

 

N/R=Not a Recommended Pressure

SNP = Stator No Poppet and Nozzle Setting

 

 

 

 

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

Full Circle Rotor

Catalog Number

 

008

EAGLE™ 900 INTERNAL ASSEMBLY

 

3

4

 

 

15

 

14

5

16

 

6

 

7

8

9

 

10

 

11

 

 

17

12

 

13

 

1

 

or

 

2

 

 

18

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

Full Circle Rotor

008

EAGLE™ 900 INTERNAL ASSEMBLY

 

Ref. Part Description

Qty.

900-E/IC

900-S/H

SNAP RINGS

 

 

 

1

Snap Cover (all models)

1

21193401

21193401

2

Rubber Cover kit

1

(212553)

(212553)

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

3

Internal Assembly (A)(B)

1

210786xx

210786xx

 

 

 

 

COVER ASSEMBLY

 

 

 

4

Self-Tapping Screw

2

210975

210975

5

Housing Cover

1

211966

211966

6

Screw O-Ring

2

209778

209778

 

 

 

 

NOZZLES

 

 

 

7

Nozzle Housing - Black (B)(C)

1

211967

211967

8

Range Nozzle Assembly

1

213900xx

213900xx

9

Spreader Nozzle Assembly

1

See chart Below

10

Retract Seal

1

210231

210231

17

Stator/Screen Kit

1

210232

210232

-

Poppet

1

-

Screen

1

-

Stator

1

 

 

 

 

BEARING / RISER-MOTOR ASSEMBLY

 

 

 

11

Nozzle Housing O-Ring

1

210168

210168

12

Bearing Guide Assy, STD

1

211460

12

Bearing Guide Assy, LO-FLOW

1

(211461)

13

Bearing Guide O-Ring

1

212383

212383

14

Riser Motor Assembly

1

209836

209836

15

Nozzle Base Replacement Kit w/seals 1

212060

212060

16

Pop-up Seal (White)

1

209781

209781

Ref.

KITS & Accessories

Qty.

P/N

1

Snap-Cover, Black

 

21192101

1

Snap-Cover, Yellow

 

21193402

1

Snap-Cover, White

 

21193403

1

Snap-Cover, Purple (Non-Potable)

 

21193404

 

 

 

Diffuser Screw Kit

 

(B) 212144

(For high performance nozzeles 44-64)

 

 

7

Nozzle Housing, Drilled & Tapped

1

 

Diffuser Screw, installed

1

 

5

Cover, (Notched)

1

 

9

Spreader Nozzle Assembly

1

 

10

Retract Seal

1

 

6

Screw O-Ring

2

 

18 CASE ASSEMBLY See Catalog No. 011

(A)Specify Nozzle Size when ordering. Available in High Performance nozzle sizes # 44, 48, 52, 56, 60, 64.

(B)For Non-Potable applications, use standard part and purple snap ring - Part # 21193404

(C)The Nozzle Housing was changed 8/99 to accomodate the new Spreader for the

High Performance nozzles. All 900 rotors and Nozzle/Housings manufactured after 8/99 have the new Nozzle Housing. Upgrade to High Performance Nozzle.

Spreader Nozzles

If Range Nozzle is:

then use:

44 - 48

Part No.: 213904

 

(Blue)

52 - 64

Part No.: 213905

 

(Black)

Stator / Poppet Configurations - High Performance and Standard Nozzles

 

Color

Number

 

Electric Pressure Setting

Hyd,

 

 

 

 

 

psi (bars)

 

SAM,

 

 

 

60 (4,1)

70 (4,8)

80 (5,5)

100 (6,9)

B

 

 

 

 

 

 

 

 

 

 

 

 

Blue

#44

SPC

 

SPC

SPC

SPC

SPC

 

Yellow

#48

SPC

 

SPC

SPC

SPO

SPC

 

Orange #52

SPC

 

SPO

SPO

SPO

SPO

 

Green

#56

N/R

 

SNP

SNP

SNP

SNP

 

Black

#60

N/R

 

SNP

SPR

SPR

SPR

 

Red

#64

N/R

 

N/R

SPR

SPR

SPR

 

 

White

#18C

SPC

 

SPC

SPC

SPC

SPC

 

Gray

#20C

SPC

 

SPC

SPC

SPC

SPC

Blue

#22C

SPC

 

SPC

SPC

SPC

SPC

Yellow

#24C

SPC

 

SPC

SPO

SPO

SPO

Orange

#26

SPO

 

SPO

SPO

SPO

SPO

Green

#28

N/R

 

SNP

SPR

SPR

SPR

Black

#30

N/R

 

SNP

SPR

SPR

SPR

Brown

#32

N/R

 

N/R

SPR

SPR

SPR

 

 

 

 

 

 

 

SPC = Stator with Poppet Closed

 

SPR = Spacer

 

 

 

 

SPO = Stator with Poppet Open

 

N/R=Not a Recommended Pressure

SNP = Stator No Poppet

 

 

and Nozzle Setting

 

 

 

 

Stator with Poppet Closed

 

 

Stator with Poppet Open

 

 

 

Should be tight when snapped in

Should be loose when snapped in

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

Part Circle Rotor

Catalog Number

 

009

EAGLE™ 950 INTERNAL ASSEMBLY

 

 

 

3

 

 

 

12

 

4

 

17

 

 

 

 

6

5

16

 

 

18

 

 

 

 

8

10

 

 

 

 

 

9

 

 

 

11

 

 

 

7

 

 

 

13

 

19

 

 

 

 

14

 

 

1

15

 

 

or

 

 

 

 

 

2

 

 

 

 

 

 

20

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

Part Circle Rotor

009

EAGLE™ 950 INTERNAL ASSEMBLY

 

Ref. Part Description

Qty.

950-E/IC

950-S/H

SNAP RINGS

 

 

 

1

Snap Cover (all models)

1

21193401

21193401

2

Rubber Cover Kit

1

212554

212554

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

3

Internal Assembly (B,C)

1

211442xx

211442xx

 

 

 

 

COVER ASSEMBLY

 

 

 

4

Self-Tapping Screw

2

210975

210975

5

One Piece Arc Adjust Conversion Kit(A)(B)

1

212893

212893

6

Housing Cover (on &after 11/06) (A)

1

(21282001)

(21282001)

8

Screw O-ring

2

209778

209778

 

 

 

 

NOZZLES

 

 

 

9

Nozzle Housing-Black(on & after 11/06)(A)(B)

1

212822

212822

10

Range Nozzle Assembly (C)

1

213950xx

213950xx

11

Retract Seal

1

210231

210231

19

Stator/Screen Kit

1

210232

210232

 

- Poppet

 

 

- Stator

 

 

- Screen

 

 

 

 

 

BEARING / RISER-MOTOR ASSEMBLY

 

 

 

12

Nozzle Housing O-Ring

1

210436

210436

13

Adjustment Stem (on & after 11/06) (A)

1

14

Bearing Guide Assy, STD

1

211460

14

Bearing Guide Assy, LO-FLOW

1

(211461)

15

Bearing Guide O-Ring

1

212383

212383

16

Riser Motor Assembly

1

210439

210439

17

Nozzle Base Replacement Kit w/seals

1

212061

212061

18

Pop-up Seal (White)

1

209781

209781

 

 

 

 

 

20

CASE ASSEMBLY See Catolog No. 011

 

 

 

Ref.

KITS & Accessories

Qty.

 

P/N

1

Snap-Cover, Black

 

 

21192101

1

Snap-Cover, Yellow

 

 

21193402

1

Snap-Cover, White

 

 

21193403

1

Snap-Cover, Purple (Non-Potable)

 

 

21193404

 

 

 

 

Rubber Cover Kit

 

 

(E)212554

-

Snap Ring Rubber cover

 

1

 

-

Upper snap ring

 

1

 

-

Housing Rubber cover

 

1

 

-

Rubber Case Cover

 

1

 

 

 

 

 

5

Cover, Yardage Marker Blank (White) (A)

 

(21214103)

5

Cover, Yardage Marker Blank (Black) (A)

 

(21214101)

 

 

 

 

Diffuser Screw Kit

 

 

(B)212145

9

Nozzle Housing, Drilled & Tapped

 

1

 

Diffuser Screws

 

2

 

5

Cover, Notched

 

1

 

11

Retract Seal

 

1

 

8

Screw O-Ring

 

2

 

 

 

 

 

EAGLE's TAIL KIT (Black)

 

 

(B)211900

9

Housing, Nozzle, Drilled in back

 

1

 

Close-in Spreader Nozzle, 700

 

1

211452

5

Housing cover

 

1

 

11

Retract Seal

 

1

 

8

Screw O-Ring

 

2

 

 

EAGLE's Tail Instruction Sheet

 

1

 

 

 

 

 

 

(A)One Piece Arc Adjust incorporated 11/06. Prior to 11/06. Upgrade to the One Piece Arc Adjust Kit. Part # 212893.

(B)For non-potable applications, use standard part and purple snap ring - Part # 21193404.

(C)Specify Nozzle Size when ordering. Available in # 18, 20, 22, 24,26,28,30,32

 

Stator / Poppet Configurations - Cascade & Non-Cascade

 

 

Color

Number

Electric Pressure Setting

Hyd,

 

 

 

 

psi (bars)

 

SAM

 

 

 

60 (4,1)

70 (4,8)

80 (5,5)

100 (6,9)

 

 

White

#18C

SPC

SPC

 

SPC

SPC

SPC

Gray

#20C

SPC

SPC

 

SPC

SPC

SPC

Blue

#22C

SPC

SPC

 

SPC

SPC

SPC

Yellow

#24C

SPC

SPC

 

SPO

SPO

SPO

 

Orange

#26

SPO

SPO

 

SPO

SPO

SPO

 

Green

#28

N/R

SNP

 

SO

SO

SPR

 

Black

#30

N/R

SNP

 

SO

SO

SPR

 

Brown

#32

N/R

N/R

 

SO

SO

SPR

 

 

 

 

 

 

SPC = Stator with Poppet Closed

SPR

= Spacer and Screen

 

 

SPO = Stator with Poppet Open

SO = Screen Only

 

 

 

SNP = Stator No Poppet

 

N/R=Not a Recommended Pressure

 

 

 

 

 

and Nozzle Setting

 

Stator with Poppet Closed

Stator with Poppet Open

Should be tight when snapped in

Should be loose when snapped in

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

 

 

 

Case Assembly

 

Catalog Number

010

 

 

 

 

 

EAGLE™ 500 / 550 / 700 / 750 SERIES

 

 

 

 

 

1

 

 

 

 

ELECTRIC CASE

 

BLOCK CASE

 

 

 

 

 

 

 

 

 

 

17

 

 

 

 

 

 

 

 

2

 

 

 

21

18

 

3

 

22

 

 

 

 

 

 

 

 

 

 

 

19

 

 

 

 

20

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

19

(D)

4

 

 

 

 

 

 

 

24

 

 

 

 

7

 

 

 

 

 

 

 

 

 

23

 

 

 

 

 

 

 

 

 

8

 

9

12

25

26

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

 

 

Case Assembly

010

 

 

EAGLE™ 500 / 550 / 700 / 750 SERIES

 

 

 

 

 

 

 

Ref. Part Description

Qty.

Electric

SAM/Hydraulic

B case

 

IC

 

CASE ASSEMBLIES

 

 

 

 

 

 

 

 

EAGLE™ 700 / 750

 

 

 

 

 

 

 

1

Case Assembly (NPT)

1

(A)

(A)

(A)

 

(A)

 

Case Assembly (BSP)

1

(B) (G)

(G)

(H)

 

(G)

 

Case Assembly (ACME)

1

(B) 21246602C

212468

21148903

(B) 21338902

EAGLE™ 500 / 550

 

 

 

 

 

 

 

1

Case Assembly (NPT)

1

(A)

(A)

(I)

 

 

Case Assembly (BSP)

1

(A)

(B,C,G)

(H)

 

 

Case Assembly (ACME)

1

(B,C)

212468

21148903

 

2

 

PRS/Selector Housing Assy (>6/95)

1

211418

 

3

 

Selector Cap

1

(D)

 

4

 

Stem Cover O-Ring

1

(D)

 

5

 

Compression Spring

1

(D)

 

6

 

Selector Spring Washer

1

(D)

 

7

 

PRS Cartridge, Upper Stem (Black)

1

(D)

 

8

 

Selector Seal (Green)

1

(D) 212244

 

9

 

Solenoid Base O-Ring

1

211237

 

10

Base Nut

1

(602606)

 

11

Plunger Core Tube Assy

1

(F) (21297201S)

 

12

Tubing

2

(E)211607

(E)211607

 

13

Solenoid Assy

1

213462C

 

14

U-Frame

1

(212124S)

 

15

Encapsulated Coil

1

602118

 

16

Solenoid Retainer

1

(627167)

 

17

Lower Snap Ring

2

210470

210470

 

18

Valve Assembly (700 / 750 Series)

1

211468

212322

 

18

Valve Assembly (500 / 550 Series)

1

212089S

212322

 

19

Probe O-Ring

2

211238

211238

 

20

Universal Filter

1

20609202

 

21

Inlet Rubber Seal

1

212328S

(212221)

 

22

Seal Nut

1

211174

 

23

Top-Serviceable Rock Screen

 

 

 

 

 

 

 

 

 

(TSRS) (>4/98) (White)

1

21171401

 21171401

 

24

O-Ring for TSRS (Yellow)

1

210366

210366

 

25

ICM Assembly

1

214010

 

9

Solenoid and ICM O-Ring

1

211237

 

26

GBS25 (Golf Black Solenoid 25kv)

1

213462C

 

 

 

 

 

 

 

 

 

 

 

KITS

 

 

 

 

 

 

 

 

 

 

Tubing Repair Kit (E)

1

211607

 

 

Quick Connects for Tube Cuts

1

212159

212159

 

 

Rubber Cover Kit (B case Only)

1

211355

 

Rubber Cover Kit (500/550/700/750) -

Smooth Case Rotor

1

(211602)

(211602)

Rubber Cover Kit (500/550/700/750) -

 

Ribbed Case Rotor

1

(212551)

(212551)

-

Sod Cup Kit

 

212613

212613

212613

212613

 

 

 

 

 

 

TOOLS - For use on 500/550/700/750 Rotors

 

 

 

 

 

Selector Service Tool Key (Orange Tool)

1

B41720

7" Selector Valve Key

1

D02215

18" Selector Valve Key

1

D02221

Snap Ring Pliers

1

D02236

D02236

Valve Insertion Tool

1

B41710

B41710

Installation Socket for TSRS

1

D02237

D02237

Universal Hose Adaptor

1

D05205

D05205

(A)1 1/4" NPT cases not available. Upgrade to ACME case w/NPT to ACME adatper (212947S).

(B)Case assembly will come with a 70psi

(4.8 bars) pressure setting

(C)Use EAGLE™ 700/750 case assembly and replace valve with 500/550 valve assembly (212089S)

(D)Included in PRS/Selector Repair Kit Post 4/01 use part 212150. Pre 4/01 part 213366 is no longer available.

(E)Tubing Repair Kit includes 20 tubes, ferrules and metal barbs.

(F)For salt water Plunger Core Tube Assy - use Part # 212732

(G)1 1/4" BSP cases not available. Upgrade to ACME case w/ BSP to ACME adapter - Use part # (21337102)

(H)1" BSP cases not available. Upgrade to ACME case w/ BSP to ACME adapter - Use part # (21337101)

(I)1" NPT cases not available. Upgrade to ACME case w/ NPT to ACME adapter - use part # 21337001

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

Case Assembly

Catalog Number

 

011

 

EAGLE™ 900 / 950 / 1100 / 1150 / 115-E SERIES

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

17

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(D)

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

19

 

 

22

 

 

 

18

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24

 

 

 

 

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

1

12

25

26

27

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 2

 

 

Catalog Number

Case Assembly

011

EAGLE™ 900 / 950 / 1100 / 1150 / 115-E SERIES

 

Ref.

Part Description

Qty.

Electric

SAM / Hydraulic

IC

CASE ASSEMBLIES

 

 

 

 

1

Case Assembly (NPT)

1

(A) 21246903

(B)

1

Case Assembly (BSP)

1

(F)

(F)

(F)

1

Case Assembly (ACME)

1

(C) 21247503C

212477(C)

(C) 21339003

2

PRS/Selector Housing Assy (>6/95)

1

(C) 211418

3

 

Selector cap

1

(D)

4

 

Stem Cover O-Ring

1

(D)

5

 

Compression Spring

1

(D)

6

 

Selector Washer

1

(D)

7

 

PRS Cartridge

1

(D)

8

 

Selector Seal (Green)

1

(D) 212244

9

 

Solenoide Base O-Ring

1

211237

10

 

Base Nut

1

(602606)

11

 

Plunger Core Tube Assy

1

12

 

Tubing

2

(E)211607

(E)211607

13

 

Solenoid Assembly Kit

1

213462C

14

 

Solenoid Retainer

1

(627167)

15

 

Solenoid U-Frame

1

(212124S)

16

 

Encapsulated Coil

1

602118

17

 

Lower Snap Ring (White)

2

208396

208396

18

 

HPDV Valve Assembly

1

211266

212323

19

 

Seal Nut (White)

1

211174

20

 

Rubber Inlet Seal

1

(211197)

212220S

21

 

Universal Filter

1

20609202

22

 

Probe & O-ring Assembly (Grey)

1

20740201

20740201

 

Probe O-Ring (Yellow)

1

211238

211238

23

 

Top-Serviceable Rock Screen (>9/98)

1

21171402

21171402

24

 

Rock Screen O-ring (Grey)

1

210366

210366

25

 

Inlet Screen (<9/98)

1

26

 

ICM Assembly

1

214010

9

 

Solenoid and ICM O-Ring

1

211237

27

 

GBS25 (Golf Black Solenoid 25kv)

1

213462C

 

 

 

 

 

 

 

KITS

 

 

 

 

 

 

Tubing Repair Kit (E)

1

211607

Quick Connect for Tube Cuts

1

212159

212159

Rubber Cover Kit 950 - Ribbed Case

1

212554

212554

 

 

 

 

 

TOOLS - For use on 900/950/1100/1150/115E Rotors

 

 

 

 

Selector Service Took Key (Orange Toll)

1

B41720

7" Selector Valve Key

1

D02215

18" Selector Valve Key

1

D02221

Snap Ring Pliers

1

D02203

D02203

Valve Insertion Tool

1

B41700

B41700

Installation Socket for TSRS

1

D02237

D02237

Universal Hose Adapter

1

D05205

D05205

(A)Only available in 80psi (5,5bars)

(B)1 1/2" NPT Case not available. Upgrade to ACME case

w/NPT to ACME adaptor - use part# 212948S

(C)Case Assemblies will be set to 80 psi (5.5 bars).

(D)Included in PRS/Selector Repair Kit Post 4/01 use part 212150. Pre 4/01 part 213366 is no longer available.

(E)Tubing repair Kit includes 20 tubes, ferrules and metal barbs.

(F)1 1/2" BSP cases not available. Upgrade to ACME case w/ BSP to ACME adapter - Use part # (21337103)

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

Page

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

2 of 2

 

Catalog Number 012

EAGLE™ 1100 SERIES INTERNAL ASSEMBLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

 

 

 

 

 

 

 

 

 

 

Ref.

Part Description

Qty

1100-E

1100-S

1100-H

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SNAP RINGS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Snap Cover (all models)

1

(21220401)

(21220401)

(21220401)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

RUBBER COVER KIT

 

1

(212607)

(212607)

(212607)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

Rubberized Snap Cover

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

 

Rubber Cover, Housing

1

(212266S)

(212266S)

(212266S)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

Screw O-Ring

2

209778

209778

209778

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

INTERNAL ASSEMBLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Internal Assembly

1

(212438xx)

(212438xx)

(212438xx)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COVER ASSEMBLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Self Tapping Screw

2

210975

210975

210975

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Diffuser Housing Insert

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Screw O-Ring

2

209778

209778

209778

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOZZLES (Please specify nozzle size when ordering - See below)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

-

Nozzle/Housing Kit

1

(212602xx)

(212602xx)

(212602xx)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

Nozzle Housing

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

Range Nozzle Assembly

1

(212604xxs)

(212604xxs)

(212604xxs)

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

Spreader Dual Nozzle Assembly

1

(212605xx)

(s212605xx)

(s212605xxs)

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

Retract Seal (Nozzle Housing)

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

18

Riser Screen

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BEARING/RISER-MOTOR ASSEMBLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

 

 

 

 

 

 

 

 

11

O-Ring Nozzle Housing

1

(212255S)

(212255S)

(212255S)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

Bearing Guide O-Ring

1

212383

212383

212383

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

Retract Spring

1

(212162S)

(212162S)

(212162S)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

Riser Motor Assembly

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16

Riser - Seal Pop-Up

1

(212172)

(212172)

(212172)

 

 

 

 

 

 

16

17

Motor Housing (Replacement)

1

 

13

 

 

 

20

Stator Assembly - Common

1

(212606)

(212606)

(212606)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CASE ASSEMBLY (Please refer to EAGLE™ 900/950/1100/1150/115-E Series, catalog

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

number 466)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stator Setting Configurations Factory

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Number

Color of Range Nozzle Electric Case Pressure Setting

Hyd/SAM

 

 

 

 

 

17

 

 

 

 

 

 

 

 

 

Psi (bars)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

80(5,5)

100(6,9) 120 (8,3) Set per Base Psi*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#48

Blue

10

11

12

10 - 12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#57

Yellow

11

12

13

11 - 13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Top View

 

 

 

 

 

 

#63

Orange

13

15

16

13 - 16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#66

Green

14

16

16

14 - 16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Factory stator set for 80psi base pressure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18

 

 

 

 

 

 

Note: Stator settings to a lower number than factory will speed up rotation speed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and shorten radius. Stator settings to a larger number than factory will slow

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bottom View

 

 

 

 

 

 

rotation speed or cause non-rotation.

 

 

 

 

Note: Part numbers enclosed in brackets ( ) are not available individually, but may be sold in assemblies or kits.

TO BUY GENUINE RAIN BIRD PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR ONLINE STORE AT WWW.RAINBIRD.COM

Page

1 of 1

 

Loading...
+ 53 hidden pages