Radio Shack Motorized 8-Inch Mirror Ball, 42-3046 User Manual

g

42-304 6.fm Page 1 Wednesday, August 11, 199 9 3:19 PM

Cat. No. 42-3046

Motori zed 8-Inch Mirror Ball

Your Radio Shack Mot orized 8-Inch Mirror Bal l is designed to be mou nted on a
ceiling and u sed with the Spot Light (Radio S hack Cat. No. 42-3049) or M ini
Flashing Light (Cat. No. 42-3048). When you shine a light on the Mirror Ball and
turn on its built-in motor to rotate it, the Mirror B all reflects beams of light to create
a party atmosphere in any room.

Warnin

: To prevent fire or shock
hazard, do not expose this system to
rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION

ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER -SERVICE­ABLE PARTS INSIDE. REFER SERVIC­ING TO QUALIFIED PERSONNEL.

: TO REDUCE THE RISK OF

Radio Shack is a registered tr ademark used by Tandy Corporation .

!

© 1995 Tandy Corporation.

All Rights Reserved.

This symbol is intended to alert
you to the presence of uninsulat­ed dangerous voltage within the
system’s enclosure that might be
of suf ficient m agnitu de to co nsti­tute a r isk of el ectri c shock . Do not
open the system’s case.

This symbo l is in tended to info rm
you that important operating and

!

maintenance instructions are in­cluded in the litera ture accom pa­nying this system.

42-304 6.fm Page 2 Wednesday, August 11, 199 9 3:19 PM

SELECTING A
MOUNTING LOCATION

Select a location for the Mirror Ball
that is:

• Sturdy enough to withstand the
weight of the motor and the Mir­ror Ball (try to find a wall stud)

• Near an AC outlet (a 6-foot AC
cord is supplied)

MOUNTING

Note

: To keep from getting finger­prints on the glass, we recommend
that you wear gloves when you hold
the Mirror Ball.

3. Using a Phillips screwdriver and
the three supplied wood screws,
mount the motor in the selected
location.

4. Use the supplied “S” hook to
hang the Mirror Ball's ring on the
motor's ring. Make sure the Mir­ror Ball is attached securely.

5. Use mounting hooks (not sup­plied) to fasten the AC power
cord to the ceiling or wall
between the mounting location
and the AC outlet. Use an exten­sion cord if necessary.

Warning:

hanging from the m oun ting loca­tion, sharp glass edges f rom the
Mirror Ball might cut the wire's
insulation and cause a shock
hazard.

If the AC cord is left

1. Using the motor's mounting
bracket as a template, mark the
locations for the three mounting
screws.

2. Drill thr ee holes
eter at the marked locations.

2

1

/8 inch in diam -