Radio Shack ITZA 2 User Manual

FEATURES

Your RadioShack ITZA 2 Remote Control can replace up to four infrared remote controls. Use it to control your TV,VCR,TV/VCR combination, cable converter, CD player and more.

Your ITZA 2 Remote Control includes a fun feature that sends your remote control into a colorful strobing light show.

This manual lists many manufacturers’ 4-digit codes for TVs,VCRs, cable converters,CD players,and more.Your remote control’s features include:

• Powerful Infrared Beam – lets you operate your remote-controlled devices from a greater distance than many original remote controls.

• Large,Easy-to-Use Keypad – with buttons in the ideal positions for easy operation.

• Toll Free Support – brings expert help for your remote control when you call 1-888-284-8735.

INTRODUCTION

Your RadioShack ITZA 2 Remote Control was designed to control the

most commonly used functions on your TV,VCR,TV/VCR combination, cable converter,and CD player. It might not be able to duplicate some of your original remote control's seldom-used functions.When you set up the ITZA 2, its command keys work like the keys on your original remote controls. For example,the ITZA 2’s POWER key works like a POWER ON/OFF key on your original remote control.

Key(s) Function

Used to set up devices.

Used to light the ITZA 2 keypad.

Operate the same as the corresponding keys on your original remote control.

Used to set up the remote control to replace original remote controls.Also used in normal operation to tell the remote control which device to control.

Control VCR functions.

Note: To record, press

REC

twice. This helps

avoid accidentally recording over tapes.

PREPARATION

Installing Batteries

Your remote control requires four AAA batteries (not supplied) for power. For the best performance and longest life, we recommend using RadioShack alkaline batteries.

Cautions:

• Use only fresh batteries of required size and recommended type.

• Do not mix old and new batteries or different types of batteries.

• Do not press any of the remote control’s keys while installing batteries.

• Always remove old or weak batteries. Batteries can leak chemicals that can destroy electronic parts.

• Dispose of old batteries promptly. Do not burn or bury them.

Note: The ITZA 2's built-in memory backup saves any programmed codes for about 10 minutes after the batteries have been removed. We recommend you have fresh batteries ready to install as soon as you remove the old ones.

1. Press the battery compartment and slide it off.

2. Place the batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside.

3. Replace the cover.

When the ITZA 2’s range decreases or it stops operating properly,promptly replace the batteries.

Note: Do not place objects on top of the remote control after you have installed the batteries. This can press keys for an extended period of time and reduce the battery life.

Device Types

Use the remote control’s device keys to control the following type of devices:

• TV key – TVs

• VCR key – VCRs and TV/VCR combinations

• CBL key – Cable converters and satellite systems

• AUX key – CD players, Video Accessories, and Home Automation systems

Setting Up Your Remote Control

1. Refer to Manufacturer Codes and note the codes for your brand of device.

Note: Some manufacturers have several codes. Try each until you find the right one. See the “If You Have Problems” section if you cannot find the correct code.

2. Press the device key for the type of remote you are replacing (TV,VCR, CBL,or AUX). The red light blinks.

3. Hold down P until the red light blinks twice, then enter the 4-digit manufacturer’s code.

For example, to replace a Panasonic TV’s remote control (manufacturer’s code 0051), press TV,hold down P until the red light blinks twice, then press 0 - 0 - 5 - 1.

When the red light blinks twice,the code has been accepted.

Note: If the code you entered is invalid, the red light blinks.

4. Point the remote control at your device and press POWER.It should turn off (or on, if it was off).

If the remote control does not operate your device,try the other codes listed in Manufacturer Codes for your brand of device.

5. Repeat Steps 2 through 4 for additional devices.

To Operate Your TV/VCR Combination

1. Locate the codes for your unit in TV/VCR Combination Codes.

2. Press VCR.The red light blinks.

3. Hold down P until the red light blinks twice, then enter the 4-digit manufacturer's code.When the red light blinks twice again, the remote control has accepted the code.

Note: If the code you entered is invalid, the red light blinks.

4. Point the remote control at your TV/VCR combination and press POWER.Your device should turn off (or on,if it was off).

If the remote does not operate your device, try the other codes you wrote down in Step 1.

Note:Some TV/VCR combinations require a second code to control volume. If you cannot control volume, use the TV code from “TV/VCR Combination Codes”.

OPERATION

General Operation

1. Press the device key for the device you want to control.

2. Point the remote control toward the device you want to control, then press the desired command keys.

3. Repeat Steps 1 and 2 for all other devices you want to operate.

Note: The command keys on the remote control work the same as the keys on the original remote control; however, the labeling might differ slightly.

4. To turn off the last device you selected, press POWER. To turn off other devices,press the device key for the device you want to turn off, then press POWER.

Converting Device Keys

You can use the ITZA 2 to operate a second TV or VCR (or other components) for a total of up to four devices. To do this, you must first convert an unused device key (TV,VCR, CBL,or AUX) to operate each additional device. For example, to convert AUX to operate a second TV:

1. Hold down P until the red light

blinks twice.

2. Press 9 - 9 - 2.The red light

blinks twice.

3. Press TV.

4. Press AUX.The red light blinks twice.

5. Program the converted device key

(AUX) with the code for the second TV. (Also see Setting Up Your Remote Control.)

6. Repeat steps 1 to 5 for each key you want to convert. To convert a key back to its original function, repeat Steps 1 and 2,then press AUX twice.

Punch-Through

The punch-through feature lets you alternately control two different devices without pressing the device keys for each one.

A TV is often the only device that uses volume keys. Punch-through allows you to control the TV’s volume while the ITZA 2 is in any device mode.With punch-through on,press VCR and use ITZA 2’s volume keys to control the TV’s volume instead of the VCR’s.

Turning Punch-Through Off /On

If your cable converter or VCR has volume control, you might want to turn off punch-through so you can use the cable converter’s or VCR’s volume instead of the TV’s.

To turn off punch-through:

1. Hold down P until the red light blinks twice.

2. Press 9 - 9 - 3 then VOL +.The red light blinks four times.

3. When you want to control the volume through your cable converter,press CBL before using the vol- ume control.

To turn punch-through back on:

1. Hold down P until the red light blinks twice.

2. Press 9 - 9 - 3,then the device key you want to control all volume (TV, for example).The red light blinks twice and the device you chose controls volume whenever you press a volume key on the ITZA 2.

Using the Strobing Light Feature

1. Press the light key ( ). The ITZA 2’s light show will start and continue for about 15 seconds. Now each time you press a key,the colorful strobing lights will appear.

NOTE: Continually pressing keys after the light show begins will cause the rate of blinking to slow down.

2. To turn off the light feature,press the light key ( ) again.

IF YOU HAVE PROBLEMS

Manual Code Search

If the ITZA 2 Remote Control does not operate your remote-controlled devices when you first set it up, you might have to manually find the correct codes for your devices.

You can try all the codes listed in Manufacturer Codes for your brand device, or follow these steps to search the remote control’s entire library.

1. Manually turn on the device you want to set up.

2. Press the corresponding device key (TV,VCR, CBL,or AUX).

3. Hold down P until the red light blinks twice, then press 9 - 9 - 1. The red light blinks twice again.

4. Aim the remote control at the device you want to operate.

5. Repeatedly press POWER then the device key (TV, VCR,CBL,or AUX) until the device turns off.

6. When the device turns off,press P within 10 seconds to save the code. The red light blinks twice.

Note: If you do not press Pwithin 10 seconds, the remote control does not save the code.

• Because the ITZA 2’s library has so

many codes,this process can take several minutes.

• If your device turns off during the

search,but does not operate after you lock in the code, begin search again and pause longer between key presses.

7. If necessary, repeat steps 1 through 6 for each device.

Note: Some VCRs and CD players do not have a power key on the original remote control. If so,manually turn on the VCR, insert a tape or CD,and repeat manual code search using

PLAY

instead of

POWER

.When

the device responds, press

.The red light

blinks twice.

Determining the 4-Digit Code

After you set up your remote control using the manual code search, you can find which 4-digit code the remote control is set to by following these steps.

1. Press the device key you want to get

the manufacturer's code from, then hold down P until the red light blinks twice.

2. Press 9 - 9 - 0. The red light blinks

twice again.

3. Press 1,then count the number of

times the red light blinks.This is the first digit of the 4-digit code.

Note:If the red light does not blink, the digit is a 0.

4. Repeat Step 3 three times to find the second,third, and fourth numbers (of the 4-digit manufacturer's code), pressing 2, 3,and 4 respec- tively for each additional digit.

Troubleshooting

If the remote control stops working after you have successfully tested the control for each device, or if you are unable to get the remote control to work at all:

• Be sure you press the device key for the device you want to control before you press any other key.

• Confirm that your remote-controlled devices are working properly by using the original remote control or the manual controls.

• Replace the batteries.

• If some keys do not function,try a different device code.

• Call 1-888-284-8735 to talk to technical support.

MANUFACTURER CODES

Use the following alphabetical list of device setup codes to locate the 4-digit codes to set up the remote control.

Notes :

• The ITZA 2 might not have every command from your original remote controls.

• A key on the remote control that has the same name as a key on your original remote control might have a slightly different function.

Setup Codes for Cable Converters:

ABC 0003, 0008,0014, 0017, 0007,

0011, 0013 Allegro 0153, 0315 Antronix 0022, 0207 Archer 0153, 0022,0207, 0798 Bell & Howell 0014 Cabletenna 0022 Cableview 0022 Century 0153 Citizen 0153, 0315 Colour Voice 0025

Comtronics 0040 Contec 0019 Eastern 0002 Emerson 0797 Everquest 0015, 0040 Focus 0400 GC Electronics 0207 Garrard 0153 Gemini 0015 General Instrument

0476, 0276,0011, 0810 GoldStar 0144, 0040 Goodmind 0797 Hamlin 0020, 0259,0009, 0034 Hitachi 0011 Hytex 0007 Jasco 0015, 0153,0315 Jerrold 0003, 0012,0476, 0276, 0014,

0015, 0011,0810 Memorex 0000 Movie Time 0063 NSC 0063 Oak 0019, 0007 Optimus 0021 Panasonic 0000,0107, 0021 Paragon 0000 Philips 0153, 0025 Pioneer 0144,0533 Popular Mechanics 0400 Pulsar 0000 Quasar 0000 RCA 0021 Radio Shack 0015, 0315,0797, 0883 Realistic 0207 Recoton 0400 Regal 0020, 0259 Regency 0002 Rembrandt 0011 Runco 0000 SL Marx 0040 Samsung 0144, 0040 Scientific Atlanta 0008, 0477, 0017 Signal 0015, 0040 Signature 0011 Sprucer 0021 Starcom 0003, 0015 Stargate 0015, 0040, 0797 Starquest 0015 TV86 0063 Tandy 0258 Teleview 0040 Tocom 0012, 0013 Toshiba 0000 Tusa 0015 Unika 0153, 0022, 0207 United Artists 0007 Universal 0153, 0022, 0191, 0207 Viewstar 0063, 0258 Zenith 0000, 0525 Zentek 0400

Setup Codes for CD Players:

ADC 0018 Adcom 0155 Aiwa 0157, 0124 Audio Alchemy 0194 Audio-Technica 0170 BSR 0194 Burmester 0420

continued on back side...

ITZA 2

UNIVERSAL REMOTE CONTROL

USER GUIDE

ITZA2_Mnl_fnl 6/14/99 8:20 PM Page 1

Setup Codes for CD Players: (continued)

California Audio Lab

0029 Carrera 0194 Carver 0157, 0179, 0437 DKK 0000 Denon 0003, 0873 Emerson 0305, 0155, 0164, 0469 Fisher 0179, 0174, 0342 GE 0009 Garrard 0420, 0393, 0280 Genexxa 0032, 0305, 0164 Goodmans 0363 Harman/Kardon 0173, 0426 Hitachi 0032, 0155 JVC 0072 Kenwo od 0028, 0037,0190, 0826, 0681 Krell 0157 Kyocera 0018 LXI 0305 Linn 0157 MCS 0029 MTC 0420 Magnavox 0157, 0305 Marantz 0029,0157, 0180 Mission 0157 NSM 0157 Nikko 0164, 0170, 0174 Onkyo 0101 Optimus 0000, 0087, 0280, 0671,0032,

0179, 0305, 0037, 0420,0145,

0468, 0175, 0194, 0196,0342,

0426, 0437, 0536, 0775 Panasonic 0029,0367, 0752 Parasound 0420,0194 Philips 0157 Pioneer 0032, 0305,0468, 0244 Proton 0157 QED 0157 Quasar 0029 RCA 0179, 0305,0053, 0009, 0155,

0764 Realistic 0179,0420, 0155, 0164, 0175,

0180, 0452, 0453 Rotel 0157, 0420 SAE 0157 STS 0018 Sansui 0157, 0305 Sanyo 0179,0087 Scott 0305, 0155, 0164 Sears 0305 Sharp 0037, 0180 Sherwood 0114, 0180, 0196, 0426 Sony 0000, 0185, 0490,0604, 0605 Soundesign 0145 Staron 0398 Tascam 0420 Teac 0420,0393, 0174, 0180 Technics 0029 Vector Research 0194 Victor 0072 Wards 0157, 0053 Yamaha 0036, 0170, 0187 Yorx 0461

Setup Codes for Home Automation:

GE 0240 One For All 0167 Radio Shack 0240

Security System 0167 Universal X10 0167 X10 0167

Setup Codes for Satellite Receivers:

AlphaStar 0772 Chaparral 0216 Echostar 0775 Expressvu 0775 General Instrument

0627, 0361,0869 HTS 0775 Hitachi 0819 Hughes Network 0749 JVC 0775 Jerrold 0627, 0361 Magnavox 0724, 0722 Memorex 0724 Next Level 0869 Panasonic 0701 Philips 0724, 0722 Primestar 0627, 0361 RCA 0566,0143, 0855 Sony 0639 Star Choice 0869 Toshiba 0790 Uniden 0724, 0722 Zenith 0856

Setup Codes for Televisions:

A-Mark 0003 AOC 0030,0019, 0003, 0185 Abex 0032 Admiral 0093 Adventura 0046 Aiko 0092 Akai 0030 Alaron 0179 Ambassador 0177 Ampro 0751 Anam 0180 Anam National 0055 Archer 0003 Audiovox 0451, 0180, 0003,0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463,0003 CXC 0180 Candle 0030, 0056,0046 Carnivale 0030 Carver 0054 Celebrity 0000 Cineral 0451, 0092 Citizen 0060, 0030,0056, 0039, 0046,

0092, 0280 Clairtone 0185 Concerto 0056 Contec 0180, 0185 Craig 0180 Crosley 0054 Crown 0180, 0039 Curtis Mathes 0047, 0054,0154, 0051, 0451,

0093, 0060,0030,0145, 0056,

0016, 0039,0166, 0466 Daewoo 0451, 0019, 0039,0092, 0623,

0624

Daytron 0019 Denon 0145 Dumont 0017,0019 Dwin 0720, 0774 Electroband 0000, 0185 Emerson 0154, 0236, 0463,0180, 0282,

0178, 0019,0179, 0039, 0177,

0185, 0280,0623, 0624 Envision 0030 Fisher 0154, 0159 Fujitsu 0179 Funai 0180, 0179, 0171 Futuretech 0180 GE 0047, 0051,0451, 0093, 0282,

0178, 0021,0055, 0135 Gibralter 0017, 0030, 0019 GoldStar 0030, 0019,0056, 0032,0178 Gradiente 0053, 0056 Grunpy 0180, 0179 Hallmark 0178 Harley Davidson 0179 Harman/Kardon 0054 Harvard 0180 Hitachi 0145,0056, 0032,0151 Infinity 0054 Inteq 0017 JBL 0054 JCB 0000 JVC 0053 Janeil 0046 KEC 0180 KTV 0180, 0030, 0039,0185, 0280 Kenwood 0030, 0019 Kloss 0046 LG 0056 LXI 0047, 0054,0154, 0156, 0178 Logik 0016 Luxman 0056 MEI 0185 MGA 0150, 0030, 0178,0019 MTC 0060, 0030, 0019,0056, 0185 Magnavox 0054, 0030, 0179,0020, 0096,

0187 Majestic 0016 Marantz 0054,0030 Matsushita 0250 Megatron 0178, 0145,0003 Memorex 0154, 0250, 0150,0056, 0016,

0178 Midland 0047, 0017, 0051,0039, 0032,

0135 Minutz 0021 Mitsubishi 0093, 0150, 0178,0019 Motorola 0093, 0055 Multitech 0180 NAD 0156, 0178, 0166 NEC 0030, 0019,0056 NTC 0092 Nikko 0030, 0178, 0092 Noshi 0018 Onwa 0180 Optimus 0154, 0166,0250 Optonica 0093, 0165 Orion 0236, 0463, 0179 Panasonic 0051,0250, 0055 Penney 0047, 0156, 0051,0060, 0030,

0178, 0021,0019, 0018, 0056,

0039, 0003,0032, 0135 Philco 0054, 0463,0030, 0145,0019,

0020, 0096 Philips 0054

Pilot 0030,0019, 0039 Pioneer 0166 Portland 0019, 0039,0092 Prism 0051 Proscan 0047 Proton 0178, 0003,0466 Pulsar 0017, 0019 Quasar 0051, 0250, 0165,0055 RCA 0047,0051, 0093,0019, 0018,

0090, 0135

Radio Shack 0047, 0154,0019, 0039, 0165,

0180, 0030,0178, 0056, 0032

Realistic 0154,0165, 0180, 0030,0178,

0039, 0032,0056 Rhapsody 0185 Runco 0017, 0030,0603 SSS 0180, 0019 Sampo 0030,0039, 0032 Samsung 0060, 0030, 0178,0019, 0056,

0032 Samsux 0039 Sansei 0451 Sansui 0463 Sanyo 0154, 0159 Scimitsu 0019 Scotch 0178 Scott 0236, 0180, 0178,0019, 0179 Sears 0047, 0054, 0154,0156, 0178,

0179, 0056,0159, 0171 Semivox 0180 Semp 0156 Sharp 0093, 0165,0039 Shogun 0019 Signature 0016 Simpson 0187 Sony 0000 Soundesign 0180, 0178,0179 Spectricon 0003 Squareview 0171 Starlite 0180 Supre-Macy 0046 Supreme 0000 Sylvania 0054,0030, 0020,0096 Symphonic 0171 TMK 0178, 0056,0177 Tandy 0093, 0218 Tatung 0055, 0003 Technics 0051,0250 Technol Ace 0179 Techwood 0051, 0056, 0003 Teknika 0054, 0180, 0150,0060, 0019,

0179, 0056, 0016, 0039,0092 Telefunken 0056 Toshiba 0154, 0156, 0060 Tosonic 0185 Totevision 0039 Vector Research 0030 Victor 0053 Vidikron 0054 Vidtech 0178, 0019 Viking 0046 Wards 0054, 0165, 0030,0178, 0021,

0019, 0179,0056, 0016, 0020,

0096 White Westinghouse

0623, 0624 Yamaha 0030, 0019 Zenith 0017, 0016, 0092 Zonda 0003

Setup Codes for TV/VCR Combos:

Brocksonic 0002, 0479 (for TV use 0463) Citizen 0278 Colt 0072 Curtis Mathes 0035 (for TV use 0051) Daewoo 0278 (for TV use 0624) Emerson 0002, 0278 (for TV use 0624),

0479 (for TV use 0463) Funai 0000 GE 0240, 0035 (for TV use 0051),

0048 (for TV use 0093),

0060 (for TV use 0047) Goldstar 0037 (for TV use 0056) Harley Davidson 0000 Hitachi 0000 Lloyds 0000 Magnasonic 0278 Magnavox 0000, 0081 (for TV use 0054) Magnin 0240 Memorex 0037, 1162 MGA 0240 Mitsubishi 0048 (for TV use 0093) Optimus 1162 Orion 0002, 0479 (for TV use 0463) Panasonic 1162, 0035 (for TV use 0051) Radio Shack 0037 RCA 0240, 0035 (for TV use 0051),

0060 (for TV use 0047),

0048 (for TV use 0093) Sansui 0000, 0240, 0479 (forTV use

0463) Sanyo 0240 Sears 0000, 0037 (for TV use 0056) Sharp 0048 (for TV use 0093) Sony 0000, 0032 (for TV use 0000) Sylvania 0081(for TV use 0054) Symphonic 0000 Thomas 0000 White Westinghouse

0278 (for TV use 0624)

Zenith 0000, 0479

Setup Codes for VCRs:

Admiral 0048 Adventura 0000 Aiko 0278 Aiwa 0037, 0000, 0307 Akai 0041,0061, 0106 American High 0035 Asha 0240 Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0121,0209, 0002, 0295,

0479 CCE 0072, 0278 Calix 0037 Canon 0035 Capehart 0020 Carver 0081 Cineral 0278 Citizen 0037, 0278 Colt 0072 Craig 0037, 0047,0240, 0072, 0271 Curtis Mathes 0060, 0035,0041, 0162 Cybernex 0240 Daewoo 0045, 0278, 0020, 0561 Daytron 0020 Denon 0042 Dynatech 0000

Electrohome 0037 Electrophonic 0037 Emerex 0032 Emerson 0037, 0184,0000, 0121,0043,

0209, 0002,0278, 0036,0061, 0068, 0208,0212, 0295,0479,

0561 Fisher 0047, 0104, 0054,0066 Fuji 0035, 0033 Funai 0000 GE 0060, 0035,0048, 0240, 0202 Garrard 0000 Go Video 0432, 0526 GoldStar 0037, 0038, 0480 Gradiente 0000, 0008 HI-Q 0047 Harley Davidson 0000 Harman/Kardon 0081, 0038 Harwood 0072, 0068 Headquarter 0046 Hitachi 0000,0042, 0041,0105 JVC 0067, 0041, 0008 Jensen 0041 KEC 0037, 0278 KLH 0072 Kenwood 0067, 0041,0038 Kodak 0035, 0037 LXI 0037 Lloyd's 0000, 0208 Logik 0072 MEI 0035 MGA 0240, 0043, 0061 MGN Technology 0240 MTC 0240, 0000 Magnasonic 0278 Magnavox 0035, 0039,0081, 0000,0149,

0110 Magnin 0240 Marantz 0035,0081 Marta 0037 Matsushita 0035, 0162,0454 Memorex 0035, 0037, 0039,0162, 0268,

0299, 0307,0047, 0000, 0048,

0046, 0104,0240 Minolta 0042, 0105 Mitsubishi 0048, 0067, 0043,0061 Motorola 0035, 0048 Multitech 0000, 0072 NAD 0058 NEC 0104, 0067,0041, 0038, 0040 Nikko 0037 Nikon 0034, 0253 Noblex 0240 Olympus 0035 Optimus 0037, 0048,0104, 0162,0454,

0058, 0240,0432, 1162 Optonica 0062 Orion 0184, 0002, 0295,0479 Panasonic 0035,0162, 0077, 0225,0454,

1162 Penney 0035, 0037, 0240,0042, 0038,

0040, 0054 Pentax 0042, 0105 Philco 0035, 0209,0479 Philips 0035, 0081,0062, 0110 Pilot 0037 Pioneer 0067, 0058 Portland 0020 Profitronic 0240 Proscan 0060, 0202 Protec 0072

Pulsar 0039 Quarter 0046 Quartz 0046 Quasar 0035, 0162, 0077,0454, 1162 RCA 0060,0035, 0048,0240, 0042,

0149, 0077,0105, 0106, 0202 Radio Shack 0000, 0307 Radix 0037 Randex 0037 Realistic 0035,0037, 0047, 0000,0104,

0046, 0240,0066, 0048, 0062 Ricoh 0034, 0253 Runco 0039 STS 0042 Samsung 0240, 0045 Sanky 0048, 0039 Sansui 0000, 0067, 0041,0271, 0479 Sanyo 0047, 0240, 0104, 0046,0268 Scott 0184, 0045, 0121,0043, 0210,

0212 Sears 0035, 0037, 0047,0000, 0042,

0104, 0046,0054, 0066, 0105 Semp 0045 Sharp 0048, 0062 Shintom 0072 Shogun 0240 Singer 0072 Sony 0035, 0032,0000, 0033, 0034,

0253 Sunpak 0253 Sylvania 0035,0081, 0000,0043, 0110 Symphonic 0000 TMK 0240, 0036,0208 Tandy 0000, 0104 Tatung 0041 Teac 0000,0041 Technics 0035,0162 Teknika 0035, 0037,0000 Thomas 0000 Toshiba 0045, 0043,0066, 0210,0212 Totevision 0037, 0240 Unitech 0240 Vector 0045 Vector Research 0038, 0040 Video Concepts 0045, 0040, 0061 Videosonic 0240 Wards 0060, 0035, 0048,0047, 0081,

0240, 0000,0042, 0072, 0149,

0062, 0212 White Westinghouse

0278 XR-1000 0035, 0000, 0072 Yamaha 0038 Zenith 0039, 0000, 0033, 0034

Setup Codes for Video Accessories:

Archer 0160 GC Electronics 0160 Jebsee 0160 Radio Shack 0160

CARE

To enjoy your ITZA 2 Remote Control for a long time:

• Keep the remote control dry. If it

gets wet,wipe it dry immediately.

• Use and store the unit only in nor-

mal temperature environments.

• Handle the remote control gently and carefully. Don’t drop it.

• Keep the remote control away from dust and dirt.

• Wipe the remote control with a damp cloth to keep it looking new.

Modifying or tampering with the ITZA 2’s internal parts can cause damage and invalidate its warranty.

If your remote control is not performing as it should,take it to your local RadioShack store for assistance.

SPECIFICATIONS

Power...................................................(4) AAA Batteries

IR Control Range.............................................26 ft ± 30°

Dimensions (H x W x D).........7-5/16 x 1-1/8 x 1-1/4 in.

(185 x 54 x 32 mm)

Weight (w/o Batteries) ................................4.1 oz (116 g)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

LIMITED 90-DAY WARRANTY

This product is warranted by RadioShack against manufacturing defects in materialand workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN,RadioSha ck SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTIT Y WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY,INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the pro duct and the RadioShack sales receipt as proof purchase date to any RadioShack store.RadioShack will, at its option,unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor;(b) replace the product with one of the same or similar design;or (c) refund the purchase price.All replaced parts and products,and products on which a refund is made, become the property of RadioShack.New or reconditioned parts and products may be used in the performance ofwarranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover:(a) damage or failure caused by or attributable to acts of God,abuse, accident,misuse, improper or abnormal usage,failure to follow instructions,improper installation or maintenance,alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage;(e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights,and you may also have other rights which vary from state to state.

RadioShack Customer Relations,

200 Taylor Street, 6th Floor

Fort Worth, TX 76102

We Service What We Sell 4/99

Cat.No. 15-1998 (Clear)

Cat.No. 15-1999 (Purple)

A Division of Tandy Corporation

Fort Worth, Texas 76102

08A99 Printed in Korea

ITZA2_Mnl_fnl 6/14/99 8:20 PM Page 2