Radio Shack 43-3206, ET-3206 User Manual

READ THIS FIRST

We have designed your telephone to conform to federal
regulations and you can connect it to most telephone
lines. However, each device you connect to the phone
line draws power from it. This power draw is the device’s

Ringer Equivalence Number

, or REN. The REN is on the

bottom of your phone.
If you are using more than one phone or other devi ce o n

the line, add up all the RENs. If the total is more than five
(or three in rural areas) your phones might not ring. If
ringer operation is impaired, remove one of the devices
from the line.

If your phone causes problems on the phone line, the
telephone company can disconnect your service. The
phone company tries to notify you in advance. If advance
notice is not practical, the telephone company notifies
you as soon as possible and advises you of your right to
file a complaint with the FCC.

The phone company can also make changes to its lines,
equipment, operations, or procedures that could affect
the phone’s operation. The phone company noti fies you
in advance, so you can take the necessary steps to pre­vent interruption of your phone service.

FCC STATEMENT

Your telephone complies with Part 68 of
must, upon request, provide the FCC registration num­ber and the REN to your telephone company. Both num­bers are on the bottom of your phone.

You must not connect your telephone to:

Note:

• coin-operated systems

• party-line systems

• most electronic key phone systems

FCC Rules

. You

CARE

• Keep the phone dry.

• Handle the phone carefully. Do not drop it.

• Do not use or store the phone in temperature
extremes.

• Keep the phone away from dust and dirt.

• Do not modify or tamper with the phone’s internal com­ponents. Doing so might invalidate the phone’s war­ranty and void your FCC authorization to operate it. If
the phone is not operating as i t should, take it to your
local RadioShack store for assistance. If the trouble is
harming the phone lines, the phone company might
ask you to disconnect the telephone until you fix the
problem.

Limited One-Year Warranty

This product is warranted by RadioShack against manufacturing de­fects in material and workmanship under normal use for one (1) year
from the date of purchase from RadioShack company-owned stores
and authorized RadioShack franchisees and dealers. EXCEPT AS
PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRAN­TIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN
LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PRO­VIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE­SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR
ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF Ra­dioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential dam­ages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the
product and the RadioShack sales receipt as proof of purchase date to
any RadioShack store. RadioShack will, at its option, unless otherwise
provided by law: (a) correct the defect by product repair without charge
for parts and labor; (b) replace the product with one of the same or sim­ilar design; or (c) refund the purchase price. All replaced parts and
products, and products on which a refund is made, become the prop­erty of RadioShack. New or reconditioned parts and products may be
used in the performance of warranty service. Repaired or replaced
parts and products are warranted for the remainder of the original war­ranty period. You will be charged for repair or replacement of the prod­uct made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attrib­utable to acts of God, abuse, accident, misuse, improper or abnormal
usage, failure to follow instructions, improper installation or mainte­nance, alteration, lightning or other incidence of excess voltage or cur­rent; (b) any repairs other than those provided by a RadioShack
Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or insurance costs; or
(f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort

Worth, TX 76102

We Service What We Sell

12/99

RadioShack

A Division of Tandy Corporation

Fort Worth, Texas 76102

ET-3206

Desktop Fashion

Phone

Handset Volume Control

■■■■

Flash

■■■■

Redial

■■■■

Mute

■■■■

Pause

■■■■

Adjustable Ringer

■■■■

Hearing Aid Compatible

■■■■

Owner’s Manual

Cat. No. 43-3206

01A00 Printed in China

MOUNTING THE PHONE

USING THE PHONE

Direct Wall Mounting

Convienent keyhole slots are located on the
base of the phone to provide easy wall
mounting. Adjust the handset holder by slid­ing the clip up. Then rotate it and slide it
back into the slot.

To mount the phone directly on the wall,

supplied long cord to the phone’s line jack and route it
through the strain relief on the bottom of the base. Drill
two holes 3

1

/4 inches (83 mm) apart. Then thread a
screw (not supplied) into each hole, letting the heads
extend

inch (5 mm) from the wall. Fit keyhole slots

3/16

over screws, slide the phone down to secure it into
place. Plug the cord into the wall jack.

1

/

4

3

3

/

16

Mounting on a Wall Mounting on a Desk

connect the

REDIAL

Press

to dial
the last number dialed
up to 31 tone and 32 pulse
numbers.

If you have pulse service,
press
with tone signals. The phone
returns to pulse dialing when
you hang up.

Plug the handset cord into the jacks

Plug the handset cord into the

on the base and handset.

jacks on the base and handset.

TONE

to dial numbers

PAUSE

Press
pause for systems that
require an access code
(9, for example) before
you can dial an outside
number.

Hold down
the other party from hearing
you. To resume the conver­sation, release

FLASH

Press

in place of

the switchhook for spe­cial services such as Call
Waiting.

If you do not sub-

Note:

scribe to any special ser­vices, pressing

FLASH

might disconnect the call.

to enter a

MUTE

MUTE

to keep

.

Desk Mounting

Plug long cord into the phone’s jack on the back of the
phone then plug the other end into a phone line jack.

The USOC number of the jack to be installed is

Note:

RJ11C.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.

This symbol is intended to alert you to
important operating and servicing
instructions included in the papers with
the telephone.

VOLUME HI/MED/LO

Set

to adjust the

volume you hear through the handset.

Set to

TONE

PULSE

or

to match the type
of service you have. If you have pulse
(rotary) service, you can switch to

TONE

during a call to use tone services.

RadioShack is a registered trademark used by Tandy Corporation.

Set the ringer Hi-Low switch to the left for a high ringer volume. Set the
switch to the right for a low ringer volume.

ÐÐ

2000 Tandy Corporation.



All Rights Reserved.