Quantum SCALAR 100 User Manual

Product: Scalar 100® 100 3.34.0003
Date: December 2005

Contents

Page Topic

1 Purpose of this Release
1 Compatibility Matrix
2 Resolved Issues
2 Documentation

Purpose of this Release

This Scalar 100 firmware release addresses known issues in previous firmware releases. Refer to Resolved

Issues for more information.

Compatibility Matrix

Refer to the following tables for information on firmware compatibility:

Library
Firmware

3.34.0003 4561 53Y2 0203_ 0001 0209 _0001 V80 V82 V34

Library
Firmware

3.34.0003 4.3 4.60.03 194A.00004

Scalar 100 Release Notes 1

Drive Firmware

LTO-1 LTO-2 AIT-2 AIT-3 DLT-8000 SDLT-320 SDLT-600

AMC

SNC 6101
Firmware

RMU
Firmware

Resolved Issues

The following issues have been resolved in this release:

Change
Request
Number

CR 35191 Corrects a condition in which SAC 73 errors occurred during cartridge

CR 40044 An extra character was added to the AIT media barcode serial number in the

CR 41173 Corrects a firmware migration failure error that occurred when attempting to

CR 41982 Corrects a condition in which Scalar 100 libraries timed out on a tape load and

CR 42437 Improved tape pushing functionality to reduce failures during a put.
CR 42478 Current Hold Limit was increased to reduce SAC 81 errors and put retries.
CR 42528 Improves control management for media used for diagnostic functions in mixed

Description

extractions from SDLT drives.

3.32.0002 library code.

update all 6 SDLT600 drives in the library with a FUP tape.

unloaded after 2.5 minutes. The library timeout should be 16 minutes or
greater.

drive libraries.

CR 44450 Corrects a condition in which learned offset information was lost after library

columns were removed or replaced. Slot learned offset information is now
retained.

CR 47554 During put operations to storage and mailbox slots for LTO and SDLT librar ies,

fingers remain open until the tape cartridge is completely seated in the
magazine.

Documentation

The following documents are currently available for the Scalar 100 100:

Document Number Document Title

6-00667-05 Scalar 100 User’s Guide
6-00671-02 Scalar 100 Quick Start Guide
6-00064-06 ADIC Management Console 4.2 User’s Guide
6-00701-03 SNC 6101 Installation and Maintenance Guide
6-00676-03 SNC Firmware 4 User’s Guide
62-0197-01 SNC 5101 for the Scalar 100 User Manual
3-01153-06 Scalar 100 Documentation and Software CD

2