Pure Sensia 200D Connect User Manual [en, de, fr, it]

Pure Warranty Statement for Australia

This statement replaces any reference to warranty which may be contained elsewhere within this manual.

What do you need to do now?

Option 1: You can register your purchase on-line at https://www.pure.com/au/register/register.asp Option 2: Or you can do nothing other than keep your proof of purchase as evidence of your purchase date.

This proof of purchase would need to be presented if warranty service was ever required.

If you have any questions about your warranty you can call us toll free .... 1800 988 268

What’s covered by this warranty?

• Pure agrees to refund, repair or replace, at your election, without charge to you, any part found to be defective during the warranty period.

• If equipment has been used according to its accompanying instruction manual and is used in a domestic situation, a two year warranty period applies (excludes rechargeable ChargePAK where ﬁtted. A one year warranty period applies to all ChargePAKs).

How do you make your claim?

Call 1800 988 268 for instructions on how to return your Pure product for warranty service or go to http:// support.pure.com/au/ and complete the contact us form.

What’s NOT covered by this warranty?

Under this express warranty Pure will not be liable for loss or damage of any kind whatsoever, whether direct, indirect, incidental, consequential or otherwise.

• Replacement of parts due to normal wear and tear

• Products with serial number defacement, modiﬁcation or removal

• Water damage or corrosion caused by dampness

• Any damage or deterioration due to shipment

• Any product which has been subjected to misuse, abuse or accident

Australian consumers — The beneﬁts to the consumer given by this express warranty are in addition to other rights and remedies of the consumer under a law in relation to the goods or services to which this warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law, You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Pure is distributed and supported in Australia by PIONEER ELECTRONICS AUSTRALIA PTY LTD, 5 ARCO LANE, HEATHERTON, VICTORIA, 3202.

ENGLISH

Thank you for choosing Sensia 200D Connect. This manual will get you up and running in no time, and explains how to make the most of your Sensia 200D Connect. We’re constantly improving and adding new features to our products. To take advantage of any enhancements made since your product was shipped, please update your software when prompted and visit support.pure.com where you can download the very latest version of this user guide in PDF format.

Safety Instructions

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.

2. Keep these instructions – The safety and operating instructions should be retained for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow all instructions – All operating and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Only use attachments/accessories speciﬁed by the manufacturer.

11. Unplug the apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13. Do not install this equipment in a conﬁned or built-in space such as a bookcase or similar unit. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc.

14. WARNING: To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects ﬁlled with liquids, such as vases, should not be placed on the apparatus.

15. WARNING: The direct plug-in adapter is used to disconnect the device and should remain readily operable.

16. WARNING: The remote batteries should not be exposed to excessive heat such as sunshine, ﬁre or the like.

17. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

18. Separation distance of at least 20cm must be maintained between the antenna of the product and all persons.

19. The power rating marking is located on the rear of the main unit.

Damage to hearing can occur with consistent exposure to high volume when using headphones. Always check the volume level before inserting headphones into your ears.

Use of headphones while operating a vehicle is not recommended and is illegal in some areas. Stop listening to your Move if you ﬁnd it distracting while operating any type of vehicle or performing any other activity that requires your full attention.

Contents

4 Getting started

4 Introduction 4 Network setup 4 Touchscreen interface 5 Controls and connectors 6 Control buttons 6 Remote Control 7 Switching on Sensia for the ﬁrst time

8 Connecting Sensia to your

network

8 Preparing Sensia for Wi-Fi Setup 8 Using the Wi-Fi wizard

9 Changing Sensia viewing

modes

9 Browse mode 10 Play mode 11 View mode

12 Listening to digital or FM radio 13 Listening to Pure Connect

content

13 Selecting Internet radio 14 Listening to other internet content

15 Music streaming

15 Accessing Pure Connect’s music streaming on

Sensia

15 Pure Connect tagging service 16 Media Panel options

16 Displaying a slide show of your pictures from a

media server

16 Adjusting slide show settings

17 Listening to audio from a USB

memory stick

19 Streaming from the Pure

Connect app

19 Download the Pure Connect app 19 Selecting Sensia or other Caskeid compatible

device in the Pure Connect app

20 Setting alarms and timers

20 Setting an alarm 20 Switching an alarm on/off 20 Skipping an alarm 20 Snoozing a sounding alarm 20 Cancelling a sounding alarm 21 Changing the snooze time 21 Setting the sleep timer

22 Basic settings

22 Autotune 22 Display 22 Language 22 Changing time/date settings 22 Changing the time format/time zone

23 Advanced settings

23 Manual Wi-Fi setup 23 Connecting Sensia to the Internet with an

Ethernet cable 24 Static IP address conﬁguration 24 Clearing network settings

25 Updating the software

25 Software update options 25 Updating the software using the network

connection 25 Updating the software using the USB port 25 Displaying details on the current software

version

26 Installing the ChargePAK F1 27 Technical speciﬁcations

17 Streaming audio from a Media

Server 18 Controlling audio playback 18 Recording radio programmes

18 Instant recordings 18 Timed recordings

Getting started

Introduction

You can use Sensia 200D Connect to:

• Listen to FM and digital radio.

• Listen to music streamed from the Pure Connect app.

• Act as a media player by streaming music from your PC or network.

• Access Pure Connect for thousands of internet radio stations, podcasts and more.

• Connect a USB memory stick to record live radio or play any stored music.

• Access Pure Connect’s music streaming service.*

• Identify and purchase songs by using the Pure Connect tagging service.*

• View photos from your network or the internet.

• Monitor and update Facebook and Twitter.

• View a news feed or the weather.

Note: Sensia 200D Connect will be referred to as Sensia throughout the rest of this user guide.

Network setup

In order to access the Pure Connect service or use media streaming you will need to connect Sensia to your network. You can connect Sensia to your network using a wireless (Wi-Fi) or wired connection. If you want to use the wired connection method, you will need to plug the optional USB Ethernet adapter into the USB port on the back of Sensia. See page 8.

We recommend using the wireless connection method, which allows you to position your Sensia anywhere within range of your wireless connection. The wireless connection method also has the advantage of leaving the USB port free, enabling you to carry out USB and playback. See page 18.

Touchscreen interface

The touchscreen on Sensia features a number of common controls:

*Requires a Pure Connect subscription.

Options Lists

Use your ﬁnger to scroll up or down the list and tap the option that you want to choose.

Buttons

Tap the button with your ﬁnger to select the required option.

Controls and connectors

Touchscreen

interface

Stand

ChargePAK

cover

Control buttons

See page 6

FM/digital aerial

DC In

Connector for supplied mains power adapter.

Aux In

Connector for analogue stereo input for MP3 player or similar.

Headphone

Stereo headphones connector.

USB

Connector for USB Ethernet adapter or USB memory stick for recording/playback.

Control buttons

Mute

Standby

Short press to put Sensia in sleep mode, which will display the clock. Long press to switch Sensia in/out of standby (the screen will turn off when Sensia is in standby).

Volume Down

Remote Control

Volume Up

Standby

Short press to put Sensia in sleep mode, which will display the clock. Long press to switch Sensia in/out of standby (the screen will turn off when Sensia is in standby).

Mute

Press to mute volume.

- Vol +

Press to adjust volume up or down.

and

Skip to beginning of current track or go to previous or next track. Hold to rewind or fast forward.

Play/pause current track.

Source

Press to switch between Digital radio, Pure Connect, Network/USB media, FM radio and Auxiliary input.

Favourites

Press to scroll through the stations in your favourites list for the selected radio source or your Pure Connect favourites.

Record

Press to record digital or internet radio to a USB memory stick. See page 18.

Tag

Press to use the Pure Connect tagging service to identify the song that is playing on a digital, FM or internet radio station.

See page 15.

Switching on Sensia for the ﬁrst time

Note: If you have a ChargePAK F1 rechargeable battery (sold separately) ﬁt it now before plugging Sensia in.

See page 26 for more information.

1. Connect the power lead into the power socket on the back of Sensia.

2. Plug the mains adapter into a live mains socket.

3. Sensia will switch on.

4. Tap the language that you want to use on the user interface.

5. Scroll down to the region you are in and tap to conﬁrm the time zone for your region.

6. Scroll to your nearest city and tap to conﬁrm the time zone for your city.

7. Tap an option to turn demo mode on/off. Demo mode is a screensaver that runs after two minutes of

inactivity.

8. A Quick start guide will display, explaining how to use the view controls. Tap to continue.

9. Sensia will perform an autotune for digital stations and tune to a station when complete.

10. Sensia will display the Play view when the autotune has completed.

Connecting Sensia to your network

To listen to internet radio, connect to a media player, access Twitter, Weather, RSS Newsreader, Picasa and Facebook, you will need to connect Sensia to your network. We recommend using the Wi-Fi wizard to connect Sensia to your network. To setup your network manually see ”Advanced settings” on page 23.

Note: The Wi-Fi wizard will automatically start if you have not set up your network settings and you select Pure Connect or Network/USB media as the audio source.

Preparing Sensia for Wi-Fi Setup

1. Tap the Browse button in the top right-hand corner of the screen to display the Browse view.

2. Position Sensia in range of your wireless network.

3. Tap Settings to display the Settings menu.

4. Tap Network to display the Network Settings menu.

5. Tap the icon next to Network type to display .

6. A summary of your wireless settings will display on Sensia.

7. To set up the wireless connection on Sensia using the wizard, tap the Wizard button and follow the steps outlined below.

Using the Wi-Fi wizard

1. Tap the name of the wireless network you want to connect to.

2. If your wireless network has security enabled, enter the security key using the on-screen keyboard.

Note: Your Wi-Fi key can normally be found on your router. If unsure, contact your Internet Service Provider.

Note: Your Wi-Fi key is case sensitive so you will need to enter it exactly as shown. To change between upper/lower case, tap the key.

3. Wait while Sensia connects to your network.

4. Sensia will return to Browse view after connecting to your wireless network.

Changing Sensia viewing modes

Sensia has three main viewing modes, Browse, Play and View. The Browse mode allows you to select sources and browse for content, the Play mode shows the media panel and controls, the View mode maximises the media panel so that it takes up the whole screen. When you select a new source, Sensia defaults to the Play mode.

Browse mode

No. Item Description

1 List Panel To navigate the list panel use your ﬁngertip to scroll the list panel up or down and tap a station/track to begin

2 Home Tap the Home icon to go back to the home for the current source.

3 Back Tap to return to the last view.

4 Quick Jump Tap the Quick Jump icon to open the Quick Jump Box.

5 Search Tap the Search icon to search for stations or tracks.

6 Media Panel Displays screens associated with the media playing, or other visuals of your choice such as photos, weather,

7 View controls Tap these buttons to change the Sensia view (Browse mode, Play mode and View mode).

8 Information panel Displays any data associated with the radio station or media ﬁle.

9 Power Indicates if Sensia is connected to mains or if it is using a ChargePAK. If Sensia is using a ChargePAK, this

10 Signal Strength Tap to display more information about the strength of the FM/Digital and Wi-Fi signal.

11 Audio Tap to adjust the bass, treble and boost the auxiliary input volume.

12 Settings Tap to view/change settings, including network, display and language.

13 Source Tap to change the audio source.

14 Alarms Tap to set the alarms and change the timer settings.

15 Recordings Tap to set timed recordings.

16 Clock/Date Tap to change the time and date settings on Sensia.

17 Icon Bar Displays the time and icons that relate to the function being used.

listening.

Tap a letter to jump to the ﬁrst station or track beginning with that letter.

Facebook, Twitter or a news feed. Slide left/right and/or up/down.

indicates the amount of power left in the ChargePAK.

Play mode

The controls in Play mode differ depending on the Source that has been selected.

No. Item Description

1 Icon Bar Displays the time and icons that relate to the media being listened to.

2 Playback controls/

Recording space

3 Media Panel Displays screens associated with the media playing, or other visuals of your choice such as photos, weather,

4 Media Title When playing music, displays the name of the track. When listening to a radio station, displays the name of the

5 View controls Tap these buttons to change the view (Browse mode, Play mode and View mode).

6 Media Information When playing music, displays information about the artist and album. When listening to a radio station displays

7 Record Tap to instantly record the live radio broadcast (digital and Internet radio only). See page 18.

8 Tag Tap to use the Pure Connect tagging service to identify the name of the song that is being played. See page

9 Favourites Tap to add the radio station to your favourites. See page 14.

10 Clock/Date Tap to change the time and date settings.

Tap the icon of the control you want to use. These controls are only active if the media being played can be controlled, e.g. music ﬁles from a USB memory stick, Media Player or from Pure Connect’s music streaming service, or Podcasts. If you are carrying out a timed recording to a USB memory stick, the amount of time left before the timed recording will end is indicated by the bar above the playback controls.

Facebook, Twitter or a news feed. Slide left/right and/or up/down.

radio station.

information about the radio show.

15.

View mode

No. Item Description

1 View controls Tap these buttons to change the view (Browse mode, Play mode, and View mode).

2 Media Panel Displays any artwork associated with the radio station/music playing.

Listening to digital or FM radio

Digital radio

FM radio

Selecting digital/FM radio

1. Tap Source to display the Source menu.

2. Tap Digital radio or FM radio.

Changing digital stations

1. Tap Browse to display the Browse view.

2. Tap Stations to display a list of available digital radio stations.

3. Scroll to the radio station that you want to listen to and tap to tune into the station.

Changing FM stations

Tap the seek buttons to automatically scan for the next station. The scan will stop when a station with a strong signal is found.

Alternatively, tap the manual tuning buttons to manually scroll to the required frequency.

Saving your favourite stations

1. Tap the Play icon in the Media panel.

2. Tap the Favourite icon so that it highlights in red

3. The radio station will be added to your favourites.

Selecting a favourite FM station

1. Tap Source to display the Source menu.

2. Tap FM radio.

3. Tap Browse to display the Browse view.

4. Tap the name of the radio station that you want to listen to in the list panel.

Selecting a favourite digital station

1. Tap Source to display the Source menu.

2. Tap Digital radio.

3. Tap Browse to display the Browse view.

4. Tap the Digital radio favourites folder.

5. Tap the name of the radio station that you want to listen to in the list panel.

Listening to Pure Connect content

Pure Connect allows you to explore thousands of radio stations, BBC listen again programmes, podcasts and Pure Sounds. To use Pure Connect, you will need to connect Sensia to your network. See page 8 for more information.

After connecting Sensia to your network, you can register your radio on the Pure Connect website. We recommend registering your radio as this allows you to manage your radio and Pure Connect favourites and access subscription services like Pure Connect’s music streaming and Pure Connect’s tagging service.

To register your Sensia:

1. Go to connect.pure.com on your PC or Mac.

2. Login with your account details or register for an account.

3. After logging in, click Devices to display your registration code. You will be asked to enter this code into your Sensia when you try to select Pure Connect as a source.

Pure Connect

Selecting Internet radio

1. Tap Source to display the Source menu.

2. Tap Pure Connect.

Searching for internet stations

1. Tap Browse to display the Browse view.

2. Tap the Live radio icon.

3. Tap the search icon on the top right of the list panel. This will open the search options in the visual panel to the right. You can search for stations based on the criteria described below:

Name Tap to search for a radio station by name. Type the name that you

want to search for using the on-screen keyboard. Tap to conﬁrm.

Genre Tap to search for a radio station based on the genre, e.g, station

content. Tap the genre to conﬁrm.

Language Tap to search for a radio station based on its broadcasting

language. Tap the language to conﬁrm.

Country Tap to search for a radio station based on the country that it is

broadcasting from. Tap the country to conﬁrm.

Quality Tap to search for a radio station based on the audio quality. Tap the

audio quality level that you want from one (low) to ﬁve (high).

4. Tap the Search button when you have ﬁnished specifying the search criteria. Any radio stations that have been found matching the speciﬁed criteria will display in the List Panel.

Using Quick Jump

Tap the Quick Jump icon at the top left of the list panel to open the Quick Jump box. Tap a letter to jump to the ﬁrst station or track beginning with that letter.

Saving your favourites stations/Pure Connect favourites

1. Tap the Favourite icon so that it highlights in red

2. The radio station will then be listed in the My favourites list. If you have multiple folders/devices in your Pure Connect account then your Pure Connect favourites will be saved under the folder associated with this Sensia (default name “Sensia 200D Connect”)

Listening to other internet content

1. Tap Source to display the Source menu.

2. Tap Pure Connect.

3. Then tap on one of the following content types:

Listen again

Tap this option to access the BBC Listen Again service, which lets you catch up with any BBC radio shows that you might of missed. These archived radio programmes are available to listen to for a set period of time after the live broadcast.

Podcasts

Podcasts are pre-recorded audio shows on a wide variety of subjects such as comedy, arts, business and culture, for you to enjoy anytime.

Pure Sounds

Our library of sounds, from birdsong to cityscapes, rolling thunder to sports cars.

Pure Music (Pure Connect’s music streaming service)

Pure Connect’s music streaming service is a cloud-based on-demand subscription service that gives you instant access to millions of music tracks. You can only see this option when you have an active Pure Connect subscription. See the following page for more information.

Selecting a favourite internet station

1. Tap Source to display the Source menu.

2. Tap Pure Connect.

3. Tap the My favourites icon.

4. Tap the name of the folder that your favourite radio station is located in.

5. Tap the name of the radio station that you want to listen to in the list panel.

Music streaming

Pure Connect’s music streaming service is a cloud-based on-demand subscription service that gives you instant access to millions of music tracks from one of the world’s largest music catalogues covering almost every conceivable artist and genre. You can listen on our music streaming and radio systems, on an Apple or Android device running the Pure Connect app or on the Pure Connect website.

Pure Connect’s music streaming is only available in certain countries. Please see http://connect.pure.com for details.

Accessing Pure Connect’s music streaming on Sensia

1. Tap Source to display the Source menu.

2. Tap Pure Connect.

3. Tap Pure Music.

4. Tap one of the following icons:

My Tracks

Tap this icon to access the tracks that you have purchased from Pure Connect.

Catalogue

Tap this icon to browse or search the complete catalogue of Pure Connect’s music streaming service on your Sensia.

By playlist

Tap this icon to listen to playlists created by you at connect.pure.com.

Pure Connect tagging service

The Pure Connect tagging service can be used to identify, bookmark and purchase tracks that are playing on a digital, FM or internet radio station. In addition to accessing your favourite music tracks, the Pure Connect tagging service also automatically back catalogues any music by similar artists that you might be interested in, allowing you to explore something completely new or rediscover forgotten favourites.

Note:

To access your tagged tracks list, you will need to log in to your Pure Connect account at

connect.pure.com.

1. Tap the Ta g icon in the icon bar.

2. Sensia will identify the name of the song that is being played and allow you to buy it (or stream it if you have a subscription to Pure Connect’s music streaming service).

Note: To use the Pure Connect tagging service, your Sensia will need to be connected to your network and you will need a Pure Connect account. See page 13 for more information on setting up a Pure Connect account.

Media Panel options

By default the Media Panel will display pictures related to the radio station you are listening to, or artwork related to the track being played. Alternatively you can choose to display a slide show of your own photographs from a media server or access internet content from Twitter, Weather, RSS Newsreader, Picasa or Facebook. Sensia needs to be connected to your network to access most of these options and you will need to be a member of Facebook, Twitter or Picasa if you want to use them.

Accessing Facebook, Twitter, Picasa and more

Swipe the Media Panel to the left or right until Twitter, Weather, RSS Newsreader, Picasa or Facebook is displayed then swipe up or down to choose which one you want to access.

Changing settings and getting help

To edit settings or the login details, tap the cog icon in the bottom left hand corner of the Media Panel.

To view help information (where available) tap the help icon in the Media Panel.

Displaying a slide show of your pictures from a media server

You can view pictures on Sensia from a media server on your network. The pictures are displayed in the form of a slide show. To view pictures from a media server, carry out the following:

1. Tap the Browse view button.

2. Tap Source.

3. Tap Network/USB media.

4. Wait while Sensia searches for pictures on any available media servers on your network.

5. The list panel will display a list of the media servers that have been found on your network.

6. Tap the media server that you want to connect to.

7. Navigate to the area where the pictures are located.

8. Tap the play icon to start viewing the pictures.

Adjusting slide show settings

1. Tap the Media Panel.

2. Tap the cog icon that appears in the bottom left hand corner.

3. Adjust the slide duration by tapping on the top and bottom of the photo timer to select the required number of seconds.

4. Tap to save the slide show settings.

Listening to audio from a USB memory stick

Sensia can be used to play music by connecting a USB memory stick to the USB port on the back of Sensia. The audio ﬁle types that Sensia supports include WMA (Standard V9), AAC, MP3 and MP2. By default, Sensia looks for audio on your network if you have not connected a USB memory stick to the back of Sensia.

Network/USB media

To listen to tracks from a USB memory stick:

1. Tap Source.

2. Tap Network/USB media.

3. Wait while Sensia searches for available media servers.

4. The list panel will display a list of the media servers that have been found on your network.

5. The contents of your USB memory stick will be shown.

6. Navigate to your tracks and tap to play.

Streaming audio from a Media Server

You can stream music stored on your computer or on a UPnP-compatible Network Attached Storage device to Sensia. To stream music from your computer you will need to install media server software on it.

To listen to tracks from a media server, ensure that Sensia is in Browse view and carry out the following:

1. Tap Source.

2. Tap Network/USB media.

3. Wait while Sensia searches for available media servers.

4. The list panel will display a list of the media servers that have been found on your network.

5. Tap the server that you want to connect to.

6. Navigate to the area where the audio is located.

Controlling audio playback

If you are streaming audio on Sensia from either a USB memory stick or Media Server, you can control the playback using the remote or on Sensia as follows:

1. Tap the Play icon in the information panel.

2. You will now be able to play, pause and skip tracks by clicking the respective icons.

Recording radio programmes

Sensia allows you to record live radio from Pure Connect and digital radio. You can either schedule recordings or record instantly. To record, you need to connect a USB memory stick to the USB port on the back of Sensia. The length of time that you can record depends on the amount of space available on your USB memory stick and the station that you are recording. A 2GB USB memory stick can record around 15 to 30 hours of digital or internet radio (based on the most common station data rates of 128kbps and 64kbps, respectively). If your USB memory stick runs out of space during a recording, Sensia will stop recording and display a message.

Instant recordings

To record instantly you will need to:

1. Tap Source to display the Source menu.

2. Tap Pure Connect or Digital radio.

3. Tune into the station that you want to record to and tap the Record icon in the icon bar or on the remote to begin recording.

Timed recordings

Note: To use timed recording, the radio station must be set up as a

favourite. For more information on creating a favourite internet radio station, see page 14. For more information on creating a favourite digital station, see page 12.

1. Tap Recordings to display the Recordings menu and tap the icon of the timer that you want to set.

. To record from a digital radio station, tap Digital radio favourites

and select the station from the list. To record from an internet radio station, tap Pure Connect favourites and select the station from the list.

3. Tap the button at the top to toggle the recording on or off

4. Tap the Occurrence drop-down menu to specify how often the recording should occur.

5. Tap Start to specify the recording start time.

6. Adjust the recording start time by tapping on the top and bottom of the clock to ﬂip through the minutes and hours.

7. Tap End to specify the recording end time.

8. Adjust the recording end time by tapping on the top and bottom of the clock to ﬂip through the minutes and hours.

9. To exit and save the recording tap . To exit and discard all changes tap .

Note: When you are scheduling a recording, the amount of space that is currently available on your USB memory stick is indicated in black on

the free space bar at the bottom of the Timed recording screen.

Streaming from the Pure Connect app

You can use the Pure Connect app to stream any music stored on your smartphone or tablet as well as all the content available on Pure Connect to Sensia and other Caskeid compatible devices (such as Jongo).

Note: Any devices that you want to use with the Pure Connect app will need to be on the same network.

Download the Pure Connect app

You can download the Pure Connect app on your smartphone or tablet from the Apple App Store or Google Play.

from the Apple App Store

from Google Play

Selecting Sensia or other Caskeid compatible device in the Pure Connect app

With the Pure Connect app you can stream to a single Caskeid device or multiple Caskeid devices simultaneously.

To start streaming content:

1. Select the content that you want to stream in the Pure Connect app.

2. Tap the icon in the app player bar on your iOS or Android device to view a list of available devices on your network.

3. Tap the icon next to the Caskeid compatible devices that you want to stream to.

Your selected content will start playing on the Caskeid devices that you selected. See the help supplied with the app for more information on streaming to a Caskeid device.

Pure Connect app

Setting alarms and timers

Setting an alarm

Sensia has two alarms. The alarms can tune into a digital or FM radio station, an internet radio station via Pure Connect or sound a tone.

1. Tap Alarms to display the Alarms menu.

2. Tap the Alarm 1 or Alarm 2 icon.

3. Tap to select the source you wish to play when the alarm is activated. For all sources except digital radio you can select from a favourite or the last item you listened to. For digital radio alarms, you can choose the last station you listened to, or any station from the list.

4. Tap the button at the top to toggle the alarm on or off.

5. Tap the Occurrence drop-down menu to specify the alarm frequency.

6. Adjust the alarm time by tapping on the top and bottom of the clock to ﬂip through minutes and hours.

7. To exit and save the alarm, tap . To exit and discard all changes tap .

Note: Any alarms that are set will not go off if Sensia is being powered by a ChargePAK.

Switching an alarm on/off

1. Tap Alarms to display the Alarm icons.

2. Tap the Alarm 1 or Alarm 2 icon.

3. Tap the button at the top to toggle the alarm on or off

4. The alarm icon at the bottom of the screen will change to indicate that the alarm has been set.

Skipping an alarm

Tap the button at the top right of the screen until the skip icon is shown to keep the alarm active but skip to the next occurrence of the alarm, e.g., If a public holiday is occurring the following day and you do not want the alarm to go off, you can tap Skip so that the alarm does not sound the next day and automatically resumes the following day.

Snoozing a sounding alarm

1. Tap Snooze to snooze a sounding alarm for the speciﬁed time (default 9 mins). See below for more information on changing the snooze time. The snooze icon will display on the screen.

2. The alarm will reactivate after the snooze time has expired.

Cancelling a sounding alarm

Tap the red button that appears on the screen to cancel the alarm and put Sensia in Sleep mode.

Tap the green button that appears on the screen to cancel the alarm and switch on Sensia.

Changing the snooze time

1. Tap Alarms to display the Alarms menu.

2. Tap the Snooze icon.

3. Adjust the snooze time by tapping on the top and bottom of the snooze timer to select the required number of minutes.

4. Tap to start the timer.

Setting the sleep timer

You can use the sleep timer to put Sensia in sleep mode after a speciﬁed period of time.

Note: If Sensia is running on a ChargePAK, Sensia will turn off after the speciﬁed sleep time.

1. Tap Alarms to display the Alarm icons.

2. Tap the Sleep icon.

3. Adjust the sleep time by tapping on the top and bottom of the sleep timer to select the required number of minutes.

4. Tap to save the settings.

Cancelling the sleep timer

Tap the button to cancel the sleep timer.

Setting the kitchen timer

You can use the kitchen timer to make Sensia sound a tone after a speciﬁed period of time.

1. Tap Alarms to display the Alarms menu.

2. Tap the Kitchen icon.

3. Adjust the kitchen timer by tapping on the top and bottom of the kitchen timer to select the required number of minutes.

4. Tap to start the timer.

Cancelling the kitchen timer

Tap the button to cancel the kitchen timer.

Using the auxiliary input

Connect an auxiliary device

Connect the line out or headphone socket of your auxiliary device to the

Aux

Aux In socket on your Sensia using a suitable cable.

Selecting the auxiliary input

1. Tap Source to display the Source menu.

2. Tap Auxiliary input.

3. The Auxiliary input screen will display.

Basic settings

Autotune

You can use the autotune function to automatically scan for new digital radio stations and remove inactive ones.

Note: This setting is only visible when Digital Radio is selected as the audio source.

1. Tap Settings to display the Settings menu.

2. Tap the Autotune icon.

3. The number of stations found will be displayed during the autotune.

4. When the autotune has ﬁnished, Sensia will tune to the last station that you were listening to.

Display

You can use the display settings to change how the screen appears when Sensia is on and in sleep.

1. Tap Settings to display the Settings menu.

2. Tap the Display icon.

3. Tap Active to change the brightness level when Sensia is on. To change how the screen appears when Sensia is in Sleep mode, tap Sleep.

4. Tap the button to toggle Automatic brightness on or off

5. Use your ﬁngertip to slide the Brightness slider to the left and right.

6. Tap the button to toggle the Display duration to on or timed

7. Tap to save the brightness setting.

Language

To change the language:

1. Tap Settings to display the Settings menu.

2. Tap the Language icon.

3. Tap the required language.

Changing time/date settings

The time and date on Sensia are automatically set by Pure Connect or the FM or digital radio signal. You can manually change the time format and the time zone.

Changing the time format/time zone

1. Tap the time to display the time/date menu.

2. Tap the Clock icon to toggle between 12 and 24 hours.

3. Tap the Zone icon to display the time zone menu.

4. Scroll down to the region you are in and tap to conﬁrm.

5. Scroll to your nearest city/country and tap to conﬁrm.

Note: Any time or date updates received by an FM or digital radio broadcast will override manual settings

Advanced settings

Manual Wi-Fi setup

1. Tap Settings.

2. Tap Network.

3. Tap the icon next to Network type so that is displayed.

4. A summary of your wireless settings will display on Sensia.

5. Tap the Manual button.

6. Enter the SSID of your network in the Network box.

7. Select the encryption type of your wireless network from the Encryption drop-down list below.

Note: Please check your wireless router conﬁguration to ﬁnd out the

type of encryption that is being used on your wireless network.

8. Tap the button next to IP setup to choose the method that you want to use for IP setup. To use DHCP, toggle the button so that DHCP is displayed and tap a static IP address, toggle the button until is displayed and tap . See page 24 for more information on how to conﬁgure a static IP address.

9. Wait while Sensia connects to the network.

10. Sensia will display the home screen after connecting to the wireless network.

Connecting Sensia to the Internet with an Ethernet cable

1. Connect the USB Ethernet adapter to the USB connector on the back of Sensia.

2. Connect an Ethernet cable to the USB adapter to an Ethernet port on your router.

3. Tap Network to display the Network Settings menu.

4. Tap the icon next to Network type so that is displayed.

5. A summary of your Ethernet settings will display on Sensia.

6. To setup the Ethernet connection on Sensia with a wizard, tap the Wizard button and follow the steps. To setup the Ethernet connection manually, tap the Manual button and conﬁgure a static IP address as described overleaf

. Tap the button when you have ﬁnished setting up the

Ethernet settings.

and proceed to the next step. To use

Static IP address conﬁguration

1. Enter the IP address that you want to assign to Sensia into the IP Address box.

2. Enter the subnet mask that you want to assign to Sensia into the Net mask box.

3. Enter the IP address of the DNS server being used on your network.

4. Enter the IP address of your network’s default gateway into the Router IP box.

5. Tap to save any changes made.

Clearing network settings

If you are having problems with your network connection, you may need to reset your network settings. To do this, carry out the following:

1. Tap the Clear icon.

2. The Clear network settings dialogue box will appear. Tap clear the network settings back to default. Tap to retain the current network settings.

Updating the software

Software update options

If an automatic software update is available for Sensia, a message will appear on the screen informing you that Sensia will update to the latest version. To proceed with the upgrade, tap the OK button.

Note: In order for automatic software updates to work, Sensia will need to be connected to your network. Note: Do not switch off Sensia while a software update is taking place.

Sensia can also be updated manually by using either the network connection or the USB port.

Updating the software using the network connection

1. Tap Settings to display the Settings menu.

2. Tap the Update icon.

3. Tap the Network update icon.

4. Sensia will connect to the internet to search for available software updates.

5. If an update is available, Sensia will begin to update the software.

Updating the software using the USB port

Contact Pure technical support: (http://support.pure.com) for more information on how to update Sensia to the latest software version.

Displaying details on the current software version

To display more information about the software version that is currently loaded on Sensia:

1. Tap Settings to display the Settings menu.

2. Tap the icon.

3. A dialogue box will open, which summarises the main features/ﬁxes of the software version that is currently loaded on Sensia.

4. Tap to return to the Settings menu.

Installing the ChargePAK F1

1. Switch Sensia off and disconnect from the mains power supply.

2. Open the battery compartment.

3. Position ChargePAK so that the contacts are facing the battery compartment and the tab is at the top and insert ChargePAK into the battery compartment.

4. Replace the battery cover and connect your product to a power supply.

5. ChargePAK will begin charging.

Note: When charging your ChargePAK for the first time or after an extended period of inactivity it is

recommended that it is charged for around 24 hours to ensure full battery power. If ChargePAK is completely flat, there may be a slight delay before the battery charging indicator is displayed.

Note: It is normal for your ChargePAK to get warm, especially during charging. Your ChargePAK will give years of trouble-free use under normal circumstances, but like all rechargeable batteries its efficiency will gradually reduce with age.

Important: Sensia can only be powered with a Pure ChargePAK F1 and is not compatible with any other batteries, either disposable or rechargeable, or any other ChargePAK model.

Technical speciﬁcations

Radio Digital (DAB/DAB+/DMB-Radio), FM and internet radio (Wi-Fi). Network

Ethernet (requires optional adapter): 10/100Mbps Media streaming Audio codecs supported include WMA (Standard V9), AAC, MP3, MP2. Media

streaming requires UPnP server or PC/MAC running UPnP server software (supplied upon registration to connect.pure.com).

Speakers Two full-range 3” drive units. Audio power output Input connectors USB 2. 14.3V DC power adapter socket (230/110V supplied) ChargePAK connector.

3.5mm Line-in for auxiliary devices.

Output connectors 3.5mm headphone socket. Controls 5.7" touchscreen display, standby button, mute button, volume up button, volume

down button.

Remote Infrared remote control. Presets Display 5.7" Capacitive sensing, 64k colour, 640 x 480 pixel TFT display. Mains power supply 230/110V AC to 14.3V DC external power adapter. ChargePAK Dimensions 166mm high x 280mm wide x 180mm deep (excluding stand). Weight 1.9kg (excluding ChargePAK). Aerial Captive telescopic aerial; internal Wi-Fi aerial. Approvals CE marked. Hereby, Pure, declares that this Band II LPD device is in compliance with

Australian C-Tick N1600 and Electrical Safety.

Wi-Fi: 802.11b and 802.11g supported with WEP and WPA/WPA2 encryption.

30W RMS.

30 digital, 30 FM and unlimited internet radio favourites.

Optional ChargePAK F1 in-unit rechargeable battery pack.

the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of Conformity may be consulted at http://www.pure.com/R&TTE-DoC. ETSI EN 300 401 compliant.

Warranty information

Imagination Technologies Limited warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of two years from the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us. Should you have a problem with your unit please contact your supplier or contact Pure Support at http://support.pure.com.

Disclaimer

Imagination Technologies Limited makes no representation or warranties with respect to the content of this document and speciﬁcally disclaims any implied warranties of merchantability or ﬁtness for any particular purpose. Further, Imagination Technologies Limited reserves the right to revise this publication and to make changes in it from time to time without obligation of Imagination Technologies Limited to notify any person or organization of such revisions or changes.

Trademarks

Sensia 200D Connect, Pure, the Pure logo, Imagination Technologies, and the Imagination Technologies logo are trademarks or registered trademarks of Imagination Technologies Limited. Version 3 March 2014.

Copyright © 2014 Imagination Technologies Limited. All rights reserved. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Imagination Technologies Limited.

Disposal of Waste Electrical & Electronic Equipment

This symbol on the product or on its packaging indicates that this product should not be treated as household waste. Instead it should be handed over to a suitable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local council ofﬁce, your household waste disposal service or the shop where you purchased the product.

+ 150 hidden pages

Pure Sensia 200D Connect User Manual [en, de, fr, it]

Specifications and Main Features

Frequently Asked Questions

User Manual