HuddleCamHD Serial Joystick Controller
Model Number: HC-JOY-G3
Joystick Keyboard Installation & Operation Manual
Easy pan, tilt & zoom controls for any RS-232, RS485, RS422 VISCA, Pelco-P or Pelco-D protocol camera!
Controls pan & tilt with variable speed.
Uses 3-Dimensional joystick with “twist” control for variable zoom.
Please check HUDDLECAMHD.com for |
|
the most up to date version of this document |
Rev 1.0 9/18 |
Key Product Features
•All Metal housing.
•VISCA, PELCO-D and PELCO-P protocol support.
•Large LCD Menu display.
•Key-press “BEEP” confirmation (optional – set on or off).
•Pan, tilt, zoom, iris and focus control.
•Variable speed control of pan, tilt, zoom, focus, and presets.
•Auto/Manual Focus and Iris.
•Cameras #1-6 ‘Quick Key’ Select buttons.
•Quick preset set & call (1 – 9)
•Preset Save, Call and Clear.
•Real time display of the current status.
•Short circuit and overcurrent protection.
•Automatic recovery program for the communication port(s).
Key Technical Specifications
•Control Interfaces:
RS232 full-duplex, RS485 semi duplex, RS422 full-duplex.
•Variable Baud Rate 1200 to 19200 bps.
•Maximum communication distance: RS485: 3,937ft [1200m] using 24 gauge twisted pair cabling
•Can control a maximum 255 cameras via Pelco-D/P.
•Voltage: 12VDC.
•Power Consumption: 6W Max.
•Display: LCD.
•Working Temperature: 14°F ~ 122°F [-10° ~ +50° C].
•Working Humidity: 10 ~ 90% (non-condensation).
•Weight 3.3 lbs. [1.5 kg]
•Dimensions: 12.6”(W) x 7.1”(D) x 4.3”(H) [320mm x 181mm x 110mm].
Page 2 of 11
Rev 1.0 9/18
In the Box
•Keyboard with three-axis control joystick.
•5p screw terminal plug (RS422/RS485).
•12VDC Power Supply.
•This Manual.
Installation
•Power Supply Interface (5.5mm x 12mm center pin JEITA style jack): 12VDC / 2000mA power supply.
•RS485/422 interface (5p screw terminal):
1:485+/422TxA, 2:485-/422TxB, 3:422RxA, 4:422RxB, 5:485/422Gnd.
•RS232 interface (DB9M port): 2:Rx, 3:Tx, 5:Gnd.
Hardware Features
•Keys: momentary push buttons (keys).
•Joystick: 3-axis joystick.
•Digital display: LCD display.
Control Mode
•VISCA, PELCO-P and PELCO-D protocol support.
•Control interfaces:
o 5p Screw Terminal (RS485/RS422).
oDB9 (RS232).
•Baud rate: 1200, 2400, 4800, 9600, 19200.
•Parameters: 8 bits, 1 stop bit, No parity.
Page 3 of 11
Rev 1.0 9/18
Keyboard/Joystick Operation
Basic Control
• Pan & Tilt Control
oJoystick movement provides variable speed pan and tilt of the camera head.
•Zoom Control
oRotation of the joystick controls variable speed zoom of the lens.
▪Clockwise rotation of the joystick = zoom in.
▪Counter-clockwise rotation of the joystick = zoom out.
Manual Control Options
• Focus Control – (VISCA Only, Pelco-P &-D do not provide for “Man Foc”)
oIncremental Focus control can also be achieved using the following keys: “Focus+”, “Focus-” (“Man Foc” is auto enabled upon pressing Focus+ or Focus-).
o Auto Focus can be enabled by pressing the “Auto Focus” key.
Page 4 of 11
Rev 1.0 9/18
Loading...