Psion Teklogix Notebook Pro User Manual

0 (0)

NETBOOK PRO

Win CE Quick Start Guide

October 1, 2003

P/N 8100010.A

ISO 9001 Certified

Quality Management System

All trademarks are the property of their respective holders.

Return-To-Factory Warranty

Psion Teklogix warrants a return-to-factory warranty for a period of one year. In some regions, the warranty exceeds this period. Please contact your local Psion Teklogix office for details. For a list of offices, see “Worldwide Offices” on page 19. The warranty on Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization. See Psion Teklogix terms and conditions of sale for full details.

Service

When requesting service, please provide information concerning the nature of the failure and the manner in which the equipment was used when the failure occurred. Type, model, and serial number should also be provided. Before returning any products to Psion Teklogix, please call the Customer Services Group for a Return Authorization number.

© Copyright 2003 by Psion Teklogix Inc., Mississauga, Ontario, Canada

This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.

Support Services

Psion Teklogix provides a complete range of product support services to its customers. For detailed information, please refer to “Support Services And Worldwide Offices” on page 17.

Disclaimer

Every effort has been made to make this material complete, accurate, and up-to-date. Psion Teklogix Inc. reserves the right to make changes without notice and shall not be responsible for any damages, including but not limited to consequential damages, caused by reliance on the material presented, including but not limited to typographical errors.

Table Of Contents

Approvals And Safety Summary . . . . . . . . . . . . . . . . . 2

1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Applications Installed On The NETBOOK PRO . 5

1.1.1 About ActiveSync . . . . . . . . . . . . . . . . . . . 6

1.2 Caring For The NETBOOK PRO . . . . . . . . . . . . . 6

2. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.1 Features Of The NETBOOK PRO . . . . . . . . . . . . 8

2.2 Preparing The NETBOOK PRO For Use . . . . . . . 9

2.2.1 Power Management . . . . . . . . . . . . . . . . . . 9

2.2.2 Multimedia And Secure Digital Cards . . . . 11

2.2.3 Compact Flash Cards . . . . . . . . . . . . . . . . . 11

2.2.4 PC Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.3 Turning The NETBOOK PRO On And Off . . . . . 12

2.4 Finding And Using The Stylus . . . . . . . . . . . . . . . 13

2.5 How To Reset The NETBOOK PRO . . . . . . . . . . 14

2.6 First Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.6.1 Navigating Between Files And Folders . . . 15

2.6.2 Starting Programs . . . . . . . . . . . . . . . . . . . . 15

2.6.3 Programs And Files . . . . . . . . . . . . . . . . . . 15

2.6.4 Entering Information . . . . . . . . . . . . . . . . . 15

2.6.5 Using Menus. . . . . . . . . . . . . . . . . . . . . . . . 16

2.6.6 Using Dialogues . . . . . . . . . . . . . . . . . . . . . 16

2.6.7 Copying Information Between Programs. . 17

3. Support Services And Worldwide Offices . . . . . . . . 17

3.1 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.2 Product Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.3 Worldwide Offices . . . . . . . . . . . . . . . . . . . . . . . . 19

3.4 World Wide Web . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 1

Approvals And Safety Summary

FCC Information For The USA

FCC Declaration Of Conformity (DoC)

Applicant’s Name & Address: PSION TEKLOGIX INC.

2100 Meadowvale Blvd.

Mississauga, Ontario, Canada L5N 7J9

Tel.: (905) 813-9900

US Representative’s

Name & Address: Psion Teklogix Corp.

1810 Airport Exchange Blvd., Suite 500

Erlanger, Kentucky, 41018, USA

Tel.: (859) 371-6006

Equipment Type / Environment: Computing Devices for Home and Office Use

Trade Name / Model No.:

NETBOOK PRO

Year of Manufacture:

2003

Standard(s) to which Conformity is Declared:

The NETBOOK PRO, supplied by Psion Teklogix, has been tested and found to comply with FCC PART 15, SUBPART B - UNINTENTIONAL RADIATORS, CLASS B COMPUTING DEVICES FOR HOME & OFFICE USE.

Applicant:

Psion Teklogix Inc.

 

Mississauga, Ontario, Canada

Legal Representative in US:

Psion Teklogix Corp.

 

Erlanger, Kentucky, USA

CE Marking

When used in a residential, commercial or light industrial environment, this product and its approved UK and European peripherals fulfil all requirements for CE marking.

FCC Information To The User

Radio And Television Interference

This equipment radiates radio frequency energy and if not used properly—that is, in strict accordance with the instructions in this manual—may cause interference to radio communications and television reception. It has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

2 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

Increase the separation distance between the equipment and the receiver.

If you are using the equipment with a mains adaptor, plug it into an outlet which is on a different circuit from that to which the receiver is connected.

Consult an experienced radio/TV technician for help.

For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: “How to Identify and Resolve Radio-TV Interference Problems”. This booklet is available from the US Government Printing Office, Washington, DC 20402 - Stock No 004-000- 00345-4.

Radio Frequency Emissions

Some equipment in hospitals and aircraft is not shielded from radio frequency emissions. Do not use the NETBOOK PRO on board aircraft, or in hospitals, without first obtaining permission.

Important Safety Instructions

This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the NETBOOK PRO, can be obtained from an authorised Psion Teklogix dealer.

If the user modifies the equipment or its peripherals in any way, and these modifications are not approved by Psion Teklogix, the FCC may withdraw the user’s right to operate the equipment.

Emissions Information For Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Infrared Device Safety

Class 1 LED Product

This product includes an Infrared device for transmitting and receiving files from devices supporting the IrDA format. Although this invisible beam is not considered harmful, and complies with EN60825-1 (IEC825-1), we recommend the following precautions when the Infrared device is transmitting:

Do not stare into the Infrared beam.

Do not view directly with optical instruments. No parts in the device may be serviced by the user.

Battery Safety Precautions

CAUTION!

Danger of explosion if a NETBOOK PRO battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same or equivalent type recommended by Psion Teklogix. Dispose of used batteries according to the instructions described in “Lithium-Ion Battery Safety Precautions”, below. Carefully review all battery safety issues listed in that section.

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 3

VORSICHT!

Explosiongefahr bei unsachgemäßem Austausch der Batterie Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.

Lithium-Ion Battery Safety Precautions

Do not store batteries at temperatures in excess of +60°C; the optimum storage temperature for maximum battery life is +10°C to +35°C.

Important: It is critical that this safety information be reviewed and that all warnings be strictly followed.

BATTERIES ARE CONSIDERED HAZARDOUS WASTE.

Used batteries must be disposed of in accordance with the manufacturer’s instructions, taken to an appropriate local battery recycling facility, or returned to one of the following Psion Teklogix offices for proper disposal.

Psion Teklogix Inc.

Psion Teklogix Corp.

Psion Teklogix S.A.

2100 Meadowvale

1810 Airport Exchange

Parc de la Duranne.

Blvd.

Blvd, Suite 500

135 rue René Descartes

Mississauga, Ontario

Erlanger, Kentucky

BP 421000

Canada

USA 41018

13591 Aix-En-Provence

L5N 7J9

 

Cedex 3

 

 

France

Warning: TO PREVENT the battery from leaking acid, generating heat or exploding, adhere to the precautions listed below.

Use only with the authorized Psion Teklogix power adaptor.

To reduce the risk of fire, do not replace the backup batteries with rechargeable batteries.

Do not dispose of in fire.

Do not incinerate or subject battery cells to temperatures in excess of 100°C (212°F). Such treatment can vaporize the liquid electrolyte causing cell rupture. Incineration may result in harmful emissions or explosion.

Do not charge, use or store batteries below - 30º C (-22° F). Batteries must be handled in accordance with all applicable state and federal laws and regulations.

The battery incorporates built-in safety devices. To ensure their proper function, do not disassemble or alter any parts of the battery.

Do not short-circuit the battery by directly connecting any of the exposed terminals with metal objects such as wire. Do not transport or store the battery together with metal objects such as necklaces, hair pins, etc.

Do not use or leave the battery near a heat source such as a fire or heater.

Do not immerse the battery in water.

When charging, use the battery charger specifically designed for the battery.

Do not crush, puncture, open, dismantle, or otherwise mechanically interfere with batteries.

Do not directly solder the battery.

Do not connect the battery to an electrical outlet, vehicle cigarette lighter, etc.

4 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

Do not put battery into a microwave oven or pressurized container.

Do not use rechargeable batteries in combination with non-rechargeable batteries (such as dry-cell batteries) or batteries of different capacities or brands.

Immediately remove the battery from the device or battery charger and stop use if the battery gives off an odour, generates heat, becomes discoloured or deformed, or in any way appears abnormal during use.

Do not continue charging the battery if it does not recharge within the specified charge time.

The battery may burst or ignite if the battery leaks. Always ensure that it is away from any exposed flames.

If a battery should leak, do not allow the contents to come into contact with your skin or your eyes. If it does, wash immediately with plenty of cold water and seek medical advice.

Do not store the battery in extremely high temperatures (e.g., a vehicle, strong direct sunlight, etc.). This may cause the battery to overheat or ignite, and it may also reduce the performance and service life of the battery.

Do not use in areas where static electricity is greater than what the manufacturer guarantees.

Keep batteries out of reach of children.

1. Introduction

This guide provides information on the operation and features of the Psion Teklogix NETBOOK PRO. For additional information, refer to the NETBOOK PRO Win CE User Manual, the online help, or the documentation supplied with the application you are using.

1.1 Applications Installed On The NETBOOK PRO

The NETBOOK PRO is capable of running a wide variety of applications. A number of standard applications exist and custom programs can be installed easily.

The following standard programs are available:

Wordpad, a word processor for writing letters and other documents.

Inbox, for sending and receiving e-mail.

Internet Explorer, for browsing the World Wide Web.

MSN Messenger, an instant-messaging program.

Pocket On-Schedule, a personal-information manager.

Stellent File Viewer, software for viewing files.

JEM-CE, Java ‘virtual machine’ software.

Windows Explorer, a file browser.

Windows Media Player, software for viewing multimedia files.

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 5

1.1.1 About ActiveSync

The Microsoft PC connectivity software, ActiveSync, can be used to connect the NETBOOK PRO to PCs running Windows 95/98/ME/2000/XP or NT 4.0. By connecting the NETBOOK PRO to a PC with a cable and running ActiveSync on the PC, you can:

View your NETBOOK PRO files from Windows Explorer by using the Mobile Device icon in the PC’s My Computer window.

Drag and drop files between the NETBOOK PRO and the PC in the same way that you would between PC drives, and they will be automatically converted to the appropriate file format at the same time.

Synchronize e-mail and your address book on the NETBOOK PRO with the PC to keep them in step with each other.

Back up your NETBOOK PRO files to the PC, then restore them from the PC to the NETBOOK PRO again, if needed.

For detailed information, please refer to the documentation supplied with Microsoft Active Sync or the NETBOOK PRO Win CE User Manual.

1.2 Caring For The NETBOOK PRO

Screen

When used with the approved stylus, the NETBOOK PRO screen is very resistant to wear and impact and should last for a considerable time. Use of any object, other than the approved stylus, may result in damage to the NETBOOK PRO screen.

To maintain the life of the NETBOOK PRO screen, keep the screen clean. To clean the screen: switch off the NETBOOK PRO and use a soft, clean, dry cloth to gently wipe the screen. (If the NETBOOK PRO is set to turn on automatically when the screen is tapped, you should turn this preference off before cleaning the screen.)

Warning: Under no circumstances use chemical solvents to clean the screen.

Charging

To avoid damage to the NETBOOK PRO or the NETBOOK PRO battery packs, use only Psion Teklogix approved chargers and docking stations.

Backup Battery

The NETBOOK PRO has a backup battery designed to retain data while the main battery pack is charging or changed over.

The backup battery is a pair of AAA alkaline batteries.These may be replaced by the user. See “Internal Backup Battery” on page 10.

Important: If both the main battery pack and the backup battery are allowed to fully discharge, all user data held in RAM will be lost.

Do not use rechargeable cells as backup batteries. For maximum data retention time in backup mode, use only non-rechargable cells as backup batteries.

6 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

Drop Rating

The NETBOOK PRO is designed to survive being dropped on any face, onto carpet, from a height of 0.7 m.

Dropping the NETBOOK PRO from greater heights or onto harder surfaces may result in damage to the NETBOOK PRO.

IP Rating

The NETBOOK PRO is rated to IP30.

Operating Temperature

The NETBOOK PRO is designed to operate within the temperature limits of 0°C to +50°C (32°F to 120°F). Use of the NETBOOK PRO outside of these temperature limits may reduce its life.

The power adaptor must be used in the temperature range: 0°C to +40°C (+32°F to +104°F).

Avoid exposing the NETBOOK PRO to sudden changes in temperature, since such exposure may result in damage.

Important: As a safety precaution, charging the NETBOOK PRO battery should be limited to the temperature range: 0°C to +40°C (32°F to 104°F). Outside of these limits, the safety circuits of the NETBOOK PRO battery pack will not allow the battery to charge.

Storage Temperature

The NETBOOK PRO is designed to be stored within the temperature ranges of -10°C to +60°C (14°F to 140°F). Stor-

age of the NETBOOK PRO outside of these temperature limits may reduce its life.

To prolong the life of the NETBOOK PRO battery packs during normal storage, store the NETBOOK PRO (and the battery pack) between +10°C and +35°C (+50°F and +95°F).

When storing the NETBOOK PRO for a long period of time, the main battery should be removed and stored fully discharged. Do not forget to back up data before removing the battery.

Humidity

The NETBOOK PRO is designed to operate in humidity ranging from 5 to 55% (non-condensing). Use of the NETBOOK PRO in environments with condensing humidity or humidity outside these limits may result in damage to the NETBOOK PRO.

Magnetic Fields And Static Electricity

The magnet of the NETBOOK PRO speaker may corrupt data stored on magnetic media. Do not keep the NETBOOK PRO next to credit cards or other magnetic media.

Avoid exposing the NETBOOK PRO to strong magnetic fields or static electricity. Such exposure may cause loss of data or result in damage to the NETBOOK PRO.

Service

Do not attempt to dismantle the NETBOOK PRO.

There are no user-serviceable parts inside, and any attempt to dismantle the NETBOOK PRO will invalidate the warranty.

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 7

Psion Teklogix Notebook Pro User Manual

2. Getting Started

2.1 Features Of The NETBOOK PRO

The NETBOOK PRO is a Windows CE.Net OS-based mobile touchscreen computer with an SVGA touch-sensitive screen. It is lightweight and designed for use in a wide range of business areas including field service, field sales, transport, health care, hospitality, manufacturing and insurance.

The NETBOOK PRO has slots for MMC and SD cards, CompactFlash cards, and PCMCIA cards. It has a USB and an RS232 serial connector, and has an IR interface. It can support card-based GSM/GPRS, CDMA, 802.11, and Bluetooth radios.

Figure 2.1 NETBOOK PRO Open

8 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

 

Latch

MMC/SD Card Slot

Power Indicator

 

Figure 2.2 Lower Front Of NETBOOK PRO

Headphone Jack

 

Power Connector

 

 

 

PCMCIA

Slot

Stylus

PCMCIA

Release Button

 

Stylus Release Button

Figure 2.3 Right Side Of NETBOOK PRO

Infrared Port

Figure 2.4 Rear Of NETBOOK PRO

Main Battery

Cover

Card

Slot

USB Connector

 

CF

 

 

 

 

RS232

 

CF Eject Button

 

RS232 Connector

Figure 2.5 Left Side Of NETBOOK PRO

2.2 Preparing The NETBOOK PRO For Use

2.2.1 Power Management

The NETBOOK PRO is powered by a lithium-ion rechargeable battery pack. The NETBOOK PRO will warn you when the main battery charge is low.

Note: How long your batteries last will depend upon how you use your NETBOOK PRO. The NETBOOK PRO will use considerably more battery power when you have the brightness turned up, are using files stored on a memory card, or are using infrared or a communications card.

You can take steps to help prolong your battery’s life:

Turn the screen brightness down.

Set automatic switch-off in the Power control panel.

Use files on the internal storage instead of a memory card, as the NETBOOK PRO requires more power to write to the memory card.

The NETBOOK PRO can be powered from AC when connected to the AC adapter. When the NETBOOK PRO is powered from AC, it will also charge the battery pack.

Fitting The Battery

Before you can use the NETBOOK PRO you must fit the battery. Slide it into place until it clicks, as shown on page 10.

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 9

Important: Take care when replacing batteries! The NETBOOK PRO will warn you when its main battery is getting low, in plenty of time to charge it. The backup battery is designed to maintain the memory for several hours.

Charging The NETBOOK PRO Battery Pack

To charge the battery, attach the battery pack to the NETBOOK PRO and connect the supplied AC adapter. The standard (2200 mAH) NETBOOK PRO battery will normally be fully charged within 3 to 4 hours.

How Do I Check The Battery Power?

To check the battery power:

1.Press the Start button. The Start menu appears.

2.Select Settings, Control Panel. The Control Panel appears.

3.Select the Power icon from the Control Panel. The Battery tab gives a brief description of the state of the main battery.

4. Push in the replacement battery pack.

Figure 2.6 Removing The Battery Pack

Important: Always switch off the NETBOOK PRO before removing the main battery.

Prolonging Battery Life

When your NETBOOK PRO is switched off, it is on “standby” and will continue to use a small amount of battery power. If you are going to leave your NETBOOK PRO switched off for a long period of time, you are advised to back up your data beforehand because the batteries will eventually run out.

Changing Battery Packs

If you are using your NETBOOK PRO away from the charger and a spare battery pack is available, you can change batteries when the battery warning is displayed. To do this:

1.Switch the NETBOOK PRO off.

2.Slide the battery pack latch towards the rear of the NETBOOK PRO.

3.Pull the battery away from the NETBOOK PRO to remove it.

Internal Backup Battery

The NETBOOK PRO has a replaceable backup battery designed to retain data while the main battery pack is charging or changed over. The backup battery is a pair of AAA cells accessible from the front of the open NETBOOK PRO.

Important: If both the main battery pack and the backup battery are allowed to fully discharge, all user data held in RAM will be lost.

The backup battery is user replaceable. To replace it:

10 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

1.Switch the NETBOOK PRO off.

2.Slide the backup-battery cover towards the front of the NETBOOK PRO.

3.Remove the AAA cells.

4.Insert replacement alkaline AAA cells, observing the polarity indication.

5.Slide the cover back over the batteries.

Figure 2.7 Backup Battery Removal

Important: If both the batteries run out of power you will lose all your information on the internal disk.

2.2.2 Multimedia And Secure Digital Cards

Multimedia cards (MMCs) and Secure Digital cards (SDs), which fit into a dedicated slot in the NETBOOK PRO, can be non-volatile memory cards (used to store application soft-

ware and/or data). They can also be communications or interface cards.

The MMC slot is located on the front of the NETBOOK PRO.

Inserting And Removing An MMC Or SD Card

Push the card into the card slot until it clicks.

To remove a card, push the card inwards. It ‘bounces’ and pops outwards, and can then be pulled out.

Store your MMC or SD card safely.

MMC/SD Slot

Figure 2.8 MMC/SD Slot Location

2.2.3 Compact Flash Cards

Compact Flash (CF) cards, which fit into a dedicated slot in the NETBOOK PRO, can be non-volatile memory cards (used to store application software and/or data). They can also be communications or interface cards.

The CF slot is located on the left side of the NETBOOK PRO.

Inserting And Removing A CF Card

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 11

Push the card into the card slot until it clicks. The eject button next to the card slot pops out.

To remove a card, press the eject button next to the slot inwards. The card pops loose, and may be pulled outwards.

Store your CF card safely.

Inserting And Removing A PC Card

Push the card into the card slot until it clicks. The eject button next to the card slot pops out.

To remove a card, press the eject button next to the slot inwards. The card pops loose, and may be pulled outwards.

Store your PC Card safely.

RS232

Eject Button

CF Slot

 

Figure 2.9 CF Card Slot Location

2.2.4 PC Cards

PC Cards, which fit into a dedicated slot in the NETBOOK PRO, can be non-volatile memory cards (used to store application software and/or data). PC Cards can also be communications or interface cards.

The PC Card slot is located on the right side of the NETBOOK PRO.

 

 

PC Card Slot

 

Eject Button

 

 

Figure 2.10 PC Card Slot Location

2.3 Turning The NETBOOK PRO On And Off

To switch on:

open the NETBOOK PRO, then press and hold the Esc/ On key for 2 seconds.

Note: If the serial cable is connected to the PC and the NETBOOK PRO, the NETBOOK PRO will automati-

12 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

cally switch on when ActiveSync on the PC is searching for a connection.

To switch off:

press and hold the Fn key, then press the Esc/On key. You can switch off at any time. You do not have to save your information first, as it is automatically saved for you.

Note: If you do not use the NETBOOK PRO, it will automatically switch off after a few minutes to save battery power. To continue using the NETBOOK PRO where you left off, switch the NETBOOK PRO on again using the On key. Power saving options are available via the Windows CE Control Panel. The automatic switch-off time may have different settings, depending on whether the NETBOOK PRO is connected to an external electrical supply.

The NETBOOK PRO can be configured to turn on when:

The On key is pressed (default)

The case is opened

The screen is touched

There is activity on the RS232 or USB port

The NETBOOK PRO can be configured to turn off when:

The Fn key, then the On key are pressed (default)

The case is closed

The user selects Start, Suspend

To reach these settings:

1.Select Start, Control Panel. The Control Panel appears.

2.Double-click on the Power icon.

2.4Finding And Using The Stylus

The stylus is located in a holder at the right. To remove it, push the square button next to the stylus. The stylus pops out. To replace it, push it back in.

 

 

Stylus

Stylus

Release

Button

Tap lightly on the screen using the stylus. You can use your fingers to tap on the screen, though it is best to use the stylus to avoid fingerprints or smudges on the screen. Do not tap the screen with any object that has a sharp tip or you may damage the screen. Don’t use any type of ink pen, as the ink may be impossible to remove. See “Caring For The NETBOOK PRO” on page 6 for instructions on how to clean the screen.

You can usually tap on (“click on”) an item with the stylus to select or change it. For example, you can:

Double-tap (or click) a program icon, to open a program.

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 13

• Press the Alt key, then tap, to right-click.

Note: If the screen doesn’t respond to your taps, you may need to re-calibrate it. You can do this by holding down the On/Off button for 3 seconds.

2.5 How To Reset The NETBOOK PRO

If you find that you cannot exit a program normally, Alt-tap on the taskbar and select Task Manager from the context menu. Select the task that appears to be unresponsive and click on the End Task button.

If this does not work, or if your NETBOOK PRO appears to have “locked up”, you can always perform a “soft reset”. This should restart your NETBOOK PRO while preserving most of your information. It is worth trying a soft reset if the keys on the NETBOOK PRO do not appear to respond, or if the NETBOOK PRO appears to switch on and you are sure that the batteries are good, but the screen is otherwise blank.

It is possible, though unlikely, that performing a soft reset after a program failure would cause the NETBOOK PRO to lose the information in its internal storage; it could even prevent the reset from working at all. If this happens, you will have to perform a hard reset.

Important: A hard reset resets the NETBOOK PRO completely, and all information in internal storage will be lost.

To perform a soft reset:

Insert a short wire, such as an unfolded paper clip, into the hole to the right of the right Shift key. Press down to press the NETBOOK PRO’s reset switch.

It is also possible to perform a soft reset by holding down the Ctrl, Alt, and Delete keys for three seconds.

Reset Switch

Figure 2.11 Location Of Soft Reset Switch

After a soft reset, any changes to open files will be lost. Your other files on the internal disk will almost always be safe.

To perform a hard reset:

Remove all batteries and AC power.

Note: Hard resetting the NETBOOK PRO will delete the ActiveSync partnership on the NETBOOK PRO. You may delete and re-create the partnership on the PC, or create another partnership with a new name. Refer to ActiveSync’s online help for more detail on this operation.

14 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

2.6 First Steps

When you first switch on the NETBOOK PRO, you will see the Windows CE desktop.

At this time it is a good idea to set the date and time. To do this:

1.Press the Start button.

2.Select Settings, Control Panel. The Windows Control Panel opens.

3.Double-tap on Date/Time Properties. The Date/ Time Properties dialogue box appears.

4.Set the desired date and time values.

5.Click the OK button in Time/Date control panel to close and save your changes.

2.6.1 Navigating Between Files And Folders

Double-click on a folder icon to open that folder. Click on the X icon to close it. Click on the Up Folder icon to move back up one level.

Click on a file to select it. Double-click to open it.

‘Up Folder’ Icon

‘Close’ Icon

2.6.2 Starting Programs

When you open a file, the correct program for this file is started automatically. You can also start programs by clicking on them from the Start Menu. You don’t have to close one program before opening another.

The taskbar displays all open applications:

2.6.3 Programs And Files

To create a new file:

open the program, select the New command on the File menu and type in the name for the new file (see “Entering Information”, below). The file will now be created. You can start entering your information.

It is a good idea to keep related files together in a folder, to make the files easier to find later.

2.6.4 Entering Information

You can enter information and complete tasks using the stylus or the keyboard.

To display and set the keyboard preferences, go to the Control Panel and open the Keyboard icon. The Keyboard Properties dialogue box appears. In

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 15

this dialogue box you can set keyboard repeat time and repeat rate.

2.6.5 Using Menus

You can usually select a menu command to perform tasks.

Click on the menu you want to access from the menu bar.

Tap on the menu names and commands, or use the arrow keys to move around the menus. Tap on com-

mands marked with a

or press the right arrow

key to see further commands.

A menu command with three dots at the end means that selecting the command will display a “dialogue” where you enter more information (see “Using Dialogues”, on page 16).

If a menu command is grey, it means that it’s not currently available; e.g. you cannot Copy unless you have first selected something to copy.

2.6.6 Using Dialogues

A “dialogue” appears when you need to make selections and enter further information. You can move between dialogue items by tapping on them, or using the up and down arrow keys. Dialogues contain one or more of the following elements:

Textbox:

where you just type in your information. When you tap in the textbox, you will need to open the on-screen keyboard to enter text.

Dropdown:

where you select from a number of options. You will see left and right arrows around the current selection; you can change the selection by tapping on the arrows, by pressing the left and right arrow keys, or by typing the first letter of the option you want.

Checkbox:

where you make a choice between selecting an option or not selecting it. Just tap on the checkbox, or press the left and right arrow keys to add or remove a checkmark.

Radio buttons:

where you make one choice from a number of options. Just tap on an option, or use the left and right arrow keys to make a selection.

If an item is grey, it is currently not available.

Some dialogues comprise a number of “pages”, each page has a “tab” at the top. Tap on the tab, or move the highlight to the tab name, to go to that page. You can also move a dialogue around the screen by holding the stylus on the dialogue title bar and dragging it across the screen.

16 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

Tabs In Dialogue Page

Dropdown Menu

Checkbox

Dialogue Buttons

Dialogues usually include standard buttons such as Ok and X. Some buttons have a standard keypress equivalent:

Usually, you can tap the OK button or press the Enter key if you want to save information and remove the dialogue.

Tap the Cancel button, the X button, or press the Esc key if you want to close the dialogue without saving the information.

For dialogues that ask a question, you can tap the Yes button or press the Y key for ‘yes’; tap the No button, press the N key, or press the Esc key for ‘no’.

2.6.7 Copying Information Between Programs

You can insert information created in one program into a different program. For example, you may want to compose text in Wordpad before copying it into an e-mail message in the Inbox. If you try to insert an object into a program that is not

designed to handle that type of object, you will be unable to Paste. Trying to copy a file from Windows Explorer into a Wordpad document will not work because Wordpad will keep the Paste option greyed out until it detects that text is ready to be pasted.

3. Support Services And Worldwide Offices

Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs.

3.1 Technical Support

Technical Support for the NETBOOK PRO is provided via e- mail through the Partner Program website. To reach the website, go to www.psionteklogix.com and click on the Partner Program link, which takes you to the Partner Program page. Then click on the “Log-in” button or the “Register” button, depending on whether you have previously registered for Teknet or the Partner Program. (Your UserID and password are the same for TekNet and the Partner Program.)

3.2 Product Repairs

International

For product repairs, please contact your local Psion Teklogix office (see “Worldwide Offices” on page 19).

Canada/U.S.A

Canadian and U.S. customers can receive access to repair services, by calling the toll-free number below, or via our secure website.

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 17

Note: Customers calling the toll-free number should have their Psion Teklogix customer number or trouble ticket

number available.

Voice:

1 800 387-8898 (press option “2”)

Fax:

1 905 812-6304

Web Site: http://service.psionteklogix.com

18 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

3.3

Worldwide Offices

 

 

 

 

COMPANY HEADQUARTERS AND

NORTH AMERICAN HEADQUARTERS AND

 

 

CANADIAN SERVICE CENTRE

U.S. SERVICE CENTRE

 

 

Psion Teklogix Inc.

Psion Teklogix Corp.

 

 

2100 Meadowvale Boulevard

1810 Airport Exchange Boulevard

 

 

Mississauga

Suite 500

 

 

Ontario

 

Erlanger, Kentucky

 

 

Canada L5N 7J9

USA 41018

 

 

Tel:

+1 905 813 9900

Tel:

+1 859 371 6006

 

 

Fax:

+1 905 812 6300

Fax:

+1 859 371 6422

 

 

E-mail:

salescdn@psion.com

E-mail:

salesusa@psion.com

 

 

INTERNATIONAL SUBSIDIARIES

 

 

 

 

Psion Teklogix GmbH

Psion Teklogix S.A.

Psion Teklogix (UK) Ltd.

Jakob Kaiser Straße 3

La Duranne

Bourne End Business Centre

D-47877 Willich Münchheide

135 Rue Rene Descartes

Cores End Road

Deutschland

BP 421000

Bourne End

Tel:

+49 2154 9282 0

13591 Aix-En-Provence

Buckinghamshire SL8 5AR, England

Fax:

+49 2154 9282 59

Cedex 3; France

Tel:

+44 1628 648800

E-mail: info@teklogix.de

Tel:

+33 4 42 90 88 09

Fax:

+44 1628 648810

Psion Teklogix Danmark

Fax:

+33 4 42 90 88 88

WWW:

www.teklogix.co.uk

E-mail:

tekeuro@psion.com

E-mail:

tekuk@psion.com

Vesterballevej 4-6

Psion Teklogix AB

Psion Teklogix Finland

7000 Fredericia

Danmark

Stora Badhusgatan 18-20

Metsänneidonkuja 8

Tel:

+45 76 24 0133

411 21 Göthenburg, Sweden

02130 Espoo

Fax:

+45 75 94 4679

Tel:

+46 31 13 15 50

Finland

 

E-mail: tedk@psion.com

Fax:

+46 31 13 57 80

Tel:

+358 9 4307 8390

 

 

E-mail:

info@teklogix.se

Fax:

+358 9 4307 8395

 

 

 

 

E-mail:

tekeuro@psion.com

Psion Teklogix NETBOOK PRO Win CE Quick Start Guide 19

Psion Teklogix Italia S.r.I

Via Galilei, 47

20092 Cinisello Balsamo

Milan, Italy

Tel:

+39 2 6604 5410

Fax:

+39 2 6604 5412

E-mail:

tkxitalia@psion.com

Psion Teklogix Inc. (Singapore)

583 Orchard Road

# 15-01 Forum

Singapore 238884

Tel:

+65 735 8108

Fax:

+65 733 5990

E-mail:

intl@psion.com

Psion Teklogix de Mexico, S.A. de C.V.

Sierra Mojada 626, 2º Piso

Col. Lomas Barrilaco, C.P. 11010 Mexico, D.F., Mexico

Tel:

+52 55 5 327 1124

Fax:

+52 55 5 327 1123

E-mail:

salesusa@psion.com

Psion Teklogix do Brasil, Ltda.

Al. Casa Branca, 851 - conj. 101 e 102 São Paulo - SP - 01408-001

Brasil

Tel:

+55 11 3064 0868

Fax:

+55 11 3068 8198

WWW:

www.teklogixbrasil.com.br

E-mail:

tekbr@psion.com

Chile Psion Teklogix International Inc.

Avenida Vitacura 2909, Oficina 703

Las Condes

Santiago, Chile

Tel:

+56 2 334 9344

Fax:

+56 2 233 3868

E-mail:

ventas@psion.com

Psion Teklogix de Argentina, S.A.

Avenida Moreau de Justo 1180 Piso 1, Oficina C-105

Buenos Aires 1107 Argentina

Tel:

+54 11 4343 0193

Fax:

+54 11 4343 6310

E-mail:

tekar@psion.com

Psion Teklogix España, S.L.

Cityparc Ronda de Dalt Ctra. Hospitalet 147-149 Edificio Atenas 2° 3ª

08940 Cornellà de Llobregat (Barcelona)

España

 

Tel:

+34 9 3475 0220

Fax:

+34 9 3475 0230

E-mail:

teklogix@apdo.com

Psion Teklogix B.V.

Venrayseweg 57,

5928 NZ Venlo

Nederlands

Tel:

+31 77 32400 44

Fax:

+31 77 32400 53

Psion Teklogix Africa

Postnet Suite 39, Private Bag x11

Halfwayhouse, 1685 Ground Floor East

Waterfall Edge Phase 2, Waterfall Park

Bekker Road MIDRAND 1685

South Africa

Tel:

+27

11 805

7440/1/2

Fax:

+27

11 805

7444

Psion Teklogix Benelux

Nieuwe weg 1, 2070 Zwijndrecht Belgium

Tel:

+32 3 250 22 00

Fax:

+32 3 250 22 20

E-mail:

info@psionteklogix.be

Psion Teklogix Wireless Technologies

(Shanghai) Ltd.

Unit 1507-08

Mingshen Building

No.3131 Kai Xuan Rd

Shanghai 200030

China

Tel:

+86 21 5407 1991

Fax:

+86 21 5407 1992

20 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide

Loading...
+ 50 hidden pages