ProMariner ProIsoCharge Series Data Sheet

ISOLATORS

36

ProIsoCharge Series

Intelligent Alternator Power Distribution System

Signicantly Smarter...

ProIsoCharge delivers digitally controlled alternator output distribution while
protecting the health of engine start batteries, isolating and charging up to

3 other independent battery banks o of a single alternator (model specic).
For dual engine applications, ProIsoCharge oers an exclusive 2 alternator

input model with up to 4 battery banks. Save space and time by eliminating
traditional diode based isolators and ancillary voltage sensitive relays or
solenoids, isolating and charging multiple battery banks simultaneously.

Eliminate typical alternator voltage loss of up to .6V DC that is commonly

associated with traditional diode based isolators. Intelligent zero volt loss
isolation insures fully charged batteries and faster charge times. Installed
with the ProNauticP Series, a boat owner can enjoy the full benet of shore
power and on the water charging. Designed to provide more time on the water
enjoying what you like most...boating.

• ProMar Digital Performance Zero Volt Loss Isolation and Charging
All digital design delivers active battery status and automatic engine battery health
priority while digitally distributing the full output of your engine’s alternators.

• Intelligent Isolation and Charging Software Control
ProIsoCharge’s intelligent software control provides priority charging to a battery

bank that is under load (i.e house bank or power inverter bank) by taking fully
charged batteries o line and priority charging discharged battery banks, while

insuring the health of the engine batteries.

• Real Time LED Status Indicators

Highly visible LEDs to indicate alternator power is present and battery bank charging

status. Fault LEDs include: high and low alternator output, over-voltage protection
and high voltage conditions that may be present on any one of the battery banks

connected (that are also connected to other charging sources gen set combi etc).

• Ignition Controlled
Distributed On Demand™ battery bank management will only activate with ignition
power on.

• Advance Regulator Ready
Advance regulator remote sense connection provided for precision alternator
algorithm control for alternators equipped with an advanced regulator.

• Easy Installation
Modular design for easy install. Includes all terminal stud insulator boots and
protective snap on safety cover.

• Built-in Safety
Ignition protected

• Five Year Warranty

IP66

Model ProIsoCharge120 1•2 ProIsoCharge180 1•2 ProIsoCharge120 1•3 ProIsoCharge250 1•2 ProIsoCharge180 1•3 ProIsoCharge250 1•3 ProIsoCharge130 2•4

Part# 23121 23122 23124 23123 23125 23126 23127

Volts 12V 12V 12V 12V 12V 12V 12V

Max DC Amps 120 Amp 180 Amp 120 Amp 250 Amp 180 Amp 250 Amp 130 Amp

Alternator Input 1 1 1 1 1 1 2

Battery Outputs 2 2 3 2 3 3 4

Size (LxWxH) 5.35"x5.875"x3.125" 6.15"x5.875"x3.125" 6.15"x5.875"x3.125" 6.95"x5.875"x3.125" 7.55"x5.875"x3.125" 8.875"x5.875"x3.125" 12.05"x5.875"x3.125"

Weight 2 lbs 3 lbs 3 lbs 4 lbs 5 lbs 6 lbs 7 lbs

Model ProIsoCharge60 1•2 ProIsoCharge100 1•2 ProIsoCharge60 1•3 ProIsoCharge100 1•3 ProIsoCharge150 1•3 ProIsoCharge80 2•4

Part# 23241 23242 23245 23246 23247 23248

Volts 24V 24V 24V 24V 24V 24V

Max DC Amps 60 Amp 100 Amp 60 Amp 100 Amp 150 Amp 80 Amp

Alternator Input 1 1 1 1 1 2

Battery Outputs 2 2 3 3 3 4

Size (LxWxH) 5.35"x5.875"x3.125" 6.15"x5.875"x3.125" 6.15"x5.875"x3.125" 7.55"x5.875"x3.125" 8.875"x5.875"x3.125" 12.05"x5.875"x3.125"

Weight 2 lbs 3 lbs 3 lbs 5 lbs 6 lbs 7 lbs