Proel S10A, S12A, S15A, S18A USER’S MANUAL

S SERIES

Active Subwoofers

USER’S MANUAL

MANUALE D’USO

ENGLISH

ITALIANO

96MAN0130-REV.28/18

2

SUMMARY - ENGLISH

 

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

.................................................................4

GENERAL SAFETY INSTRUCTIONS...........................................................................................................

4

IN CASE OF FAULT...................................................................................................................................

4

PACKAGING, SHIPPING AND COMPLAINT..............................................................................................

4

WARRANTY AND PRODUCTS RETURN....................................................................................................

4

MAINTENANCE AND DISCLAIMER .........................................................................................................

5

POWER SUPPLY ......................................................................................................................................

5

CONFORMITY .........................................................................................................................................

5

INTRODUCTION ......................................................................................................................................

6

DESCRIPTION..........................................................................................................................................

6

INSTRUCTIONS .......................................................................................................................................

6

1.

LINE IN (XLR-JACK combo input) .................................................................................................

7

2.

LINK LEFT (XLR output balanced) ................................................................................................

7

3.

OUT LEFT (XLR output balanced) ................................................................................................

7

4.

INPUT RIGHT (combo XLR-JACK input)........................................................................................

7

5.

LINK RIGHT (XLR output balanced) .............................................................................................

7

6.

OUT RIGHT (XLR output balanced) .............................................................................................

7

7.

GND LIFT switch ..........................................................................................................................

7

8.

FILTER switch...............................................................................................................................

8

9.

LEVEL control...............................................................................................................................

8

10.

SIGN/CLIP indicator .................................................................................................................

8

11.

PHASE 0° / 180° switch............................................................................................................

8

12.

ON indicator ............................................................................................................................

8

13.

POWER switch .........................................................................................................................

8

14.

LINE VOLTAGE selector ............................................................................................................

8

15.

FUSE holder .............................................................................................................................

8

16.

AC~ socket ...............................................................................................................................

9

17.

TECHNICAL SPECIFICATION......................................................................................................

9

18.

ACCESSORIES ...........................................................................................................................

9

Mechanical Dimensions ......................................................................................................................

17

S10A .................................................................................................................................................

17

S12A .................................................................................................................................................

17

S15A .................................................................................................................................................

18

S18A .................................................................................................................................................

18

Configurations .....................................................................................................................................

19

Connectors ..........................................................................................................................................

19

3

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the enviroment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their

local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

GENERAL SAFETY INSTRUCTIONS

CAUTION - Before using this product read carefully the following safety instructions. Take a look of this manual entirely and preserve it for future reference. When using any electric product, basic precautions should always be taken, including the following:

To reduce the risk, close supervision is necessary when the product is used near children.

Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.

This product should be site away from heat sources such as radiators, lamps and any other device that generate heat.

Care should be taken so that objects and liquids do not go inside the product.

The product should be connected to a power supply only of the type described on the operating instructions or as marked on the product.

IN CASE OF FAULT

In case of fault or maintenance this product should be inspected only by qualified service personnel when:

Liquids have spilled inside the product.

The product has fallen and been damaged.

The product does not appear to operate normally or exhibits a marked change in performance.

Do not operate on the product, it has no user-serviceable parts inside.

Refer servicing to an authorized maintenance centre.

PACKAGING, SHIPPING AND COMPLAINT

This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions immediately after unpacking it.

If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.

Proel is not responsible for any damage that occurs during shipment.

Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.

Possible damages to unit should be immediately notified to forwarder. Each complaint for manumitted package should be done within eight days from product receipt.

WARRANTY AND PRODUCTS RETURN

Proel products have operating warranty and comply their specifications, as stated by manufacturer.

Proel warrants all materials, workmanship and proper operation of this product for a period of two years from the original date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty period, the owner should inform about these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect

4

detailed description. This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly used and warranty is still valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any "direct damage" or "indirect damage" caused by product defectiveness.

MAINTENANCE AND DISCLAIMER

Clean only with dry cloth.

Proel products have been expressly designed for audio application, with signals in audio range (20Hz to 20kHz). Proel has no liability for damages caused in case of lack of maintenance, modifications, improper use or improper installation non-applying safety instructions.

Proel S.p.A. reserves the right to change these specifications at any time without notice.

Proel S.p.A. declines any liability for damages to objects or persons caused by lack of maintenance, improper use, installation not performed with safety precautions and at the state of the art.

POWER SUPPLY

This apparatus should only be connected to power source type specified in this owner’s manual or on the unit.

If the supplied AC power cable plug is different from the wall socket, please contact an electrician to change the AC power plug.

Hold the plug and the wall outlet while disconnecting the unit from AC power.

If the unit will not be used for a long period of time, please unplug the power cord from AC power outlet.

To avoid unit power cord damage, please do not strain the AC power cable and do not bundle it, do not step on it or pinch it by heavy objects.

The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

CONFORMITY

The product is in compliance with CE Directive LVD 2014 / 35 / CE as stated in EN 60065 standard.

The product is in compliance with CE Directive EMC 2014 / 30 / CE as stated in EN 55103-1 and EN 55103-2 standards.

FCC COMPLIANCE NOTICE

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipmentand receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

5

Proel S10A, S12A, S15A, S18A USER’S MANUAL

INTRODUCTION

Thank you for choosing this PROEL product and for your trust in our brand, synonymous of professionalism, accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in professional applications.

DESCRIPTION

S series is a range of compact and powerful sub-woofers designed to complement PROEL full-range passive or active speakers. The variety of size, power and SPL offered by the four S models provides the perfect low extension solution for any speaker model available in the PROEL range.

All the S models feature high-excursion woofers in a Hybrid Band Pass configuration (HBP). This innovative design provides a higher efficiency compared to direct radiation sub-woofers and, in addition, guarantees a much better coupling of the tuning ducts with the external air, reducing the distortion and the air turbulence, for a more defined sound and deep and punchy lows.

The new CLASS D amplifier modules with SMPS (Switch Mode Power Supply) can generate a massive amount of continuous power in a compact, lightweight and reliable package. All the modules include a STEREO preamp section, 24dB/oct. crossover filters with selectable frequency and PHASE reverse switch.

The cabinets are built with 15 / 18mm plywood and finished with extra-durable polyurethane paint. They feature two flush handles and four sturdy 75mm wheels for an easy transport (S15 and S18 only).

INSTRUCTIONS

6

Loading...
+ 14 hidden pages