PROEL NEOS10PX, NEOS12PX User Manual
USER MANUAL
NEOS10PX
passive loudspeaker
KEY FEATURES
• Premium transducers
• Rotatable asymmetric HF horn
• HF driver protec on
• Plywood cabinets with die-cast handles, dual-angle pole holder and mul ple fl ying points
INTRODUCTION
NEOS PX series represents the highest expression of PROEL GROUP Research & Development applied in loudspeaker systems. A natural evolu on
of the NEOS Series, it incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium
sound, maximum performance and up-to-date features.
The NEOS PX are designed for the use both as high-performance mobile systems for live applica ons and for advanced fi xed installa ons.
The NEOS PX are able to provide an excep onal sound defi ni on together with very high dynamics and low distor on in an ultra-compact
package.
The NEOS PX passive fi lters are provided with a protec on on circuit for the HF driver, which has a two-step opera on: the fi rst step reduces the
power accordingly to the music content and without an audible eff ect; if a too high power level is present for a long period of me, the second
step shut the HF driver off .
TECHNICAL SPECIFICATION
AcousƟ cal Frequency Response Diagram
System type Full range 2-way, vented
Low frequency driver 10’’ woofer - 2” VC
High frequency driver 1’’ compression driver - tanium diaphragm
Frequency response 70 Hz - 20 kHz
Horn type Asymmetrical rotatable horn
Coverage 100°>80° H x 60° V
Max SPL 124 dB
Electrical
Nominal Impedance 8 ohm
Power Handling Con nuous 250 W
Power Handling Peak 500 W
Sensi vity 97 dBspl @ 1W / 1m
Passive Crossover Frequency 2500 Hz
Connectors IN - LINK: Speakon® (NL4MP)
Controls FULL-RANGE / BI-AMP opera on (internal jumper)
Mechanical
Construc on 15 and 18 mm birch plywood
Finish An -scratch black paint
Flying hardware 4 x M10 - top, bo om, rear
Trapezoidal taper 10°
Monitor taper 42°
Pole holder 1 bo om dual angle (0° / 7.5°)
Dimensions (W x H x D) 355 x 520 x 310 mm
Weight 16 kg (35.2 lbs)
10k5k2k
1k
500200100502020 20kHz
110.0
dBSPL
100.0
90.0
80.0
70.0
60.0
MECHANICAL DRAWING
35.0 cm
13.8"
30.5 cm
12"
53.0 cm
20.9"
Dual Angle Pole Holder
M10 Flying Point
M10 Flying Point
M10 Flying Point
OPTIONAL ACCESSORIES
ASO25 2 in 4 out analog loudspeaker processor for speaker suspending:
PC240 2 in 4 out digital loudspeaker processor PLH295 M10 Ø 50 mm Truss mount coupler
PC260 2 in 6 out digital loudspeaker processor AC169A M10 black shoulder eyebolt
COVERNE10 Loudspeaker so bag AC171 L = 75 cm / 30 inch Aircra cable sling
FRE300BK Loudspeaker ground stand AC172 L = 1.5 m / 4.9 Aircra cable sling
KP210BK Sub-Speaker pole AC173 Screw pin anchor shackle
KPPTL10 Loudspeaker wall stand
KPTFL10PB Loudspeaker free aiming ground stand
NL4FX Neutrik Speakon® PLUG
see www.proel.com for detailed descrip on and other available accessories.
SPARE PARTS
NL4MP Neutrik Speakon® panel socket
91CR0062 Crossover module
98NEOS10WZ8 10’’ woofer - 2” VC
98DRICN8 1’’ compression driver - tanium diaphragm
Loading...