Proavio S4UF User Manual
PROAVIO
Drive your creativity
TM
Studiorack
www.proavio.com/studiorack
Quick start guide
S4UF
FW800 Storage Array with Multi-interface Connectivity
S4UF-UG v.1.0
S4UF
Quick start guide
Welcome
1
Thank you for choosing Proavio
Thank you for buying Studiorack S4UF, the rst professional FireWire800storage
solution designed for high resolution digital media production, and general high
performance storage requirements.
What is in the box?
2
Hot-swap Disk Trays - Qty 4
Carefully unpack your S4UF storage system, and inventory the
accessories according to your model type.
FW400 FW800 FW800
Disks 1-2
Disks 3-4
Rack-ear Mounting Kits - Qty 2
USB2.0
FW400 FW800 FW800
USB2.0
S4UF Multi-Lane Array - Qty 1
FW800 HDD Link Cable - Qty 1
High-speed USB2.0 Cable - Qty 1
High-quality FW800 Cable - Qty 1
High-quality FW400 Cable - Qty 1
Disk Installation
4
Hard Disk
Disk Tray
NOTE: Push right to unlock
If your S4UF was purchased with capacity, please skip this section and
immediately go to section 5. If your S4UF was purchased without disks,
install each disk into the provided disk trays and fasten using the supplied
hdd screws. Do not use any other mounting screws other than the ones provided
with your S4UF. System or disk damage may occur if using non-approved
mounting hardware.
Insert Disk Module
5
After fastening each disk, insert the disk trays in the open disk bays on your
S4UF. Gently press the tray handle until you hear a “soft” click. Do not force
the tray into the disk bay.
+
+
Figure 1. Figure 2.
Disk tray - Bottom view
+
+
HDD Mounting Hardware - Qty 16
Desktop Support Stands - Qty 4
Standard IEC Power Cable - Qty 1
Unpack your Studiorack
3
S4UF | FW800 Storage Array with Multi-interface Connectivity
Unpack all components including the HDD mounting screws, key sets and
cables. If you are missing any of the items mentioned above, please contact
your dealer or contact proavio at www.proavio.com.
Figure 3.
Gently “press” tray handle to insert HDD
PROAVIO
TM
Loading...