P7000 User’s Manual
READ THIS SOFTWARE LICENSE AGREEMENT BEFORE USING THIS PRINTER
Software License Agreement
CAREFULLY READ THE FOLLOWING TERMS AND
CONDITIONS BEFORE USING THIS PRINTER. USING THIS
PRINTER INDICATES YOUR ACCEPTANCE OF THESE
TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO
THESE TERMS AND CONDITIONS, PROMPTLY RETURN
THE PRINTER AND ALL ACCOMPANYING HARDWARE
AND WRITTEN MATERIALS TO THE PLACE YOU
OBTAINED THEM, AND YOUR MONEY WILL BE
REFUNDED.
Definitions.
“Software” shall mean the digitally encoded, machine-readable
data and program. The term “Software Product” includes the
Software resident in the printer and its documentation. The
Software Product is licensed (not sold) to you, and Printronix,
Inc. either owns or licenses from other vendors who own, all
copyright, trade secret, patent and other proprietary rights in
the Software Product.
License.
1. Authorized Use. You agree to accept a non-exclusive
license to use the Software resident in the printer solely
for your own customary business or personal purposes.
2. Restrictions.
a. To protect the proprietary rights of Printronix, Inc.,
you agree to maintain the Software Product and
other proprietary information concerning the
typefaces in strict confidence.
b. You agree not to duplicate or copy the Software
Product.
c. You shall not sublicense, sell, lease, or otherwise
transfer all or any portion of the Software Product
separate from the printer, without the prior written
consent of Printronix, Inc.
d. You may not modify or prepare derivative works of
the Software Product.
e. You may not transmit the Software Product over a
network, by telephone, or electronically using any
means; or reverse engineer, decompile or
disassemble the Software.
f. You agree to keep confidential and use your best
efforts to prevent and protect the contents of the
Software Product from unauthorized disclosure or
use.
3. Transfer. You may transfer the Software Product with the
printer, but only if the recipient agrees to accept the
terms and conditions of this Agreement. Your license is
automatically terminated if you transfer the Software
Product and printer.
Limited Software Product Warranty
Printronix, Inc. warrants that for ninety (90) days after delivery,
the Software will perform in accordance with specifications
published by Printronix, Inc. Printronix, Inc. does not warrant
that the Software is free from all bugs, errors and omissions.
Remedy
Your exclusive remedy and the sole liability of Printronix, Inc.
in connection with the Software is replacement of defective
software with a copy of the same version and revision level.
Disclaimer of Warranties and Limitation of Remedies
1. THE PARTIES AGREE THAT ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE AND MERCHANTABILITY ARE EXCLUDED.
Printronix, Inc. does not warrant that the functions
contained in the Software will meet your requirements or
that the operation of the Software will be uninterrupted or
error free. Printronix, Inc. reserves the right to make
changes and/or improvements in the Software without
notice at any time.
2. IN NO EVENT WILL PRINTRONIX, INC. BE LIABLE
FOR LOST PROFITS, LOST DATA, BUSINESS
INTERRUPTIONS, OR ANY OTHER DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF OR
INABILITY TO USE THIS PRODUCT, EVEN IF
PRINTRONIX, INC. HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, OR ANY
DAMAGES CAUSED BY THE ABUSE OR
MANIPULATION OF THE SOFTWARE. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
3. Printronix, Inc. will not be liable for any loss or damage
caused by delay in furnishing a Software Product or any
other performance under this Agreement.
4. Our entire liability and your exclusive remedies for our
liability of any kind (including liability for negligence
except liability for personal injury caused solely by our
negligence) for the Software Product covered by this
Agreement and all other performance or nonperformance
by us under or related to this Agreement are limited to the
remedies specified by this Agreement.
5. California law governs this Agreement.
Termination of License Agreement
This License shall continue until terminated. This license may
be terminated by agreement between you and Printronix, Inc.
or by Printronix, Inc. If you fail to comply with the terms of this
License and such failure is not corrected within thirty (30) days
after notice. When this License is terminated, you shall return
to the place you obtained them, the printer and all copies of the
Software and documentation.
U.S. Government Restricted Rights
Use, duplication or disclosure by the Government is subject to
restrictions as set forth in the Rights in Technical Data and
Computer Software clause at FAR 242.227-7013, subdivision
(b) (3) (ii) or subparagraph (c) (1) (ii), as appropriate. Further
use, duplication or disclosure is subject to restrictions
applicable to restricted rights software as set forth in FAR
52.227-19 (c) (2).
Acknowledgement of Terms and Conditions
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTAND IT, AND AGREE TO BE
BOUND BY ITS TERMS AND CONDITIONS. NEITHER
PARTY SHALL BE BOUND BY ANY STATEMENT OR
REPRESENTATION NOT CONTAINED IN THIS
AGREEMENT. NO CHANGE IN THIS AGREEMENT IS
EFFECTIVE UNLESS WRITTEN AND SIGNED BY
PROPERLY AUTHORIZED REPRESENTATIVES OF EACH
PARTY. BY USING THIS PRINTER, YOU AGREE TO
ACCEPT THE TERMS AND CONDITIONS OF THIS
AGREEMENT.
User’s Manual
The Printronix P7000 Series PSA3™ Printers
This document contains proprietary information protected by copyright. No
part of this document may be reproduced, copied, translated, or incorporated
in any other material in any form or by any means, whether manual, graphic,
electronic, mechanical, or otherwise, without the prior written consent of
Printronix.
Printronix makes no representations or warranties of any kind regarding this
material, including, but not limited to, implied warranties of merchantability
and fitness for a particular purpose. Printronix shall not be held responsible
for errors contained herein or any omissions from this material or for any
damages, whether direct or indirect, incidental or consequential, in connection
with the furnishing, distribution, performance, or use of this material. The
information in this manual is subject to change without notice.
COPYRIGHT 1997, 2009 PRINTRONIX, INC.
Trademark Acknowledgements
IBM, AS/400, and Proprinter are registered trademarks, and Intelligent Printer
Data Stream and IPDS are trademarks of International Business Machines
Corporation.
Printronix, PGL, LinePrinter Plus, and IGP are registered trademarks, and
P7005, P7010, P7015, P7205, P7210, P7215, P7220, and SureStak are
trademarks of Printronix, Inc.
ANSI is a registered trademark of the American National Standards Institute,
Inc.
Centronics is a registered trademark of Genicom Corporation.
CSA is a registered certification mark of the Canadian Standards Association.
Dataproducts is a registered trademark of Dataproducts Corporation.
EIA is a registered service mark of the Electronic Industries Association.
Epson is a registered trademark of Seiko Epson Corporation.
Ethernet is a trademark of Xerox Corporation.
IEEE is a registered service mark of the Institute of Electrical and Electronics
Engineers, Inc.
QMS is a registered trademark, and Code V is a trademark of Quality Micro
Systems, Inc.
TUV is a registered certification mark of TUV Rheinland of North America, Inc.
UL is a registered certification mark of Underwriters Laboratories, Inc.
ENERGY STAR is a registered trademark of the United States Environmental
Protection Agency. As an ENERGY STAR
determined that this product meets the ENERGY STAR guidelines for energy
efficiency.
®
Partner, Printronix has
Table of Contents
1 Introduction........................................................... 11
Printer Overview .....................................................................................11
Printronix P7000 Series Printers ......................................................11
Integrated Print Management System.............................................. 12
Graphics Enhancements ..................................................................14
Taking Care Of Your Printer............................................................. 14
Conventions In This Manual ...................................................................15
Warnings And Special Information .........................................................15
Related Documents ................................................................................15
Contact Information ................................................................................16
Printronix Customer Support Center ................................................16
Printronix Supplies Department........................................................16
Corporate Offices .............................................................................17
2 Setting Up The Printer .......................................... 19
Before You Begin.................................................................................... 19
Power Requirements ..............................................................................19
Select A Site ...........................................................................................19
Printer Dimensions .................................................................................20
Printer Component Locations .................................................................23
3 Operating The Printer ........................................... 25
Powering On The Printer ........................................................................25
Operating Modes ....................................................................................25
The Control Panel...................................................................................26
Control Panel Keys ..........................................................................27
Operational Procedures..........................................................................30
Reload Paper ................................................................................... 30
Unload Paper ................................................................................... 39
Integrated Print Management System ....................................................42
Lighter Or Darker Print .....................................................................42
Changing Ribbons............................................................................43
Cancel A Print Job ...........................................................................46
Table of Contents
4 The Configuration Menus .....................................47
Configuration Overview ..........................................................................47
Changing Parameter Settings ..........................................................47
Saving Parameter Settings ..............................................................47
Default And Custom Configurations.................................................48
Navigating The Menus .....................................................................48
Changing Parameters Example .......................................................49
Auto Save Configuration ..................................................................52
Saving Your New Configuration .......................................................52
Optimizing Print Quality....................................................................57
Optimizing Print Speed ....................................................................58
Main Menu .............................................................................................. 59
QUICK SETUP ....................................................................................... 62
ZTP SETTINGS......................................................................................68
CONFIG. CONTROL ..............................................................................69
HOST INTERFACE ................................................................................ 72
Auto Switching Submenu .................................................................73
IEEE 1284 Parallel (Bidirectional) Submenu.................................... 75
Centronics (Parallel) Submenu ........................................................ 76
Dataproducts Submenu ...................................................................79
Serial Submenu................................................................................ 81
E-Net Adapter Submenu..................................................................86
Ethernet Submenu ........................................................................... 86
NETWORK SETUP MENU.....................................................................87
ADAPTER ADDRESS ......................................................................87
ADAPTER PARAMS ........................................................................ 88
ETHERNET ADDRESS ................................................................... 91
ETHERNET PARAMS......................................................................92
WLAN ADDRESS ............................................................................94
WLAN PARAMS............................................................................... 95
WLAN KERBEROS ..........................................................................99
WLAN LEAP................................................................................... 101
ACTIVE IGP EMUL............................................................................... 102
ACTIVE EMULATION...........................................................................103
EMULATION.........................................................................................103
Coax/Twinax (CTHI) Emulation ............................................................104
Standard......................................................................................... 104
Simple Prot Conv ...........................................................................105
Coax Emulation ..............................................................................106
Twinax Params ..............................................................................115
3270 Params..................................................................................121
5250 Params..................................................................................128
Table of Contents
SPC Coax Params .........................................................................132
SPC Twx Params ...........................................................................135
LinePrinter Plus Emulation ...................................................................137
LinePrinter Plus Emulation (With PCL-II).............................................. 139
P-Series Emulation ........................................................................144
P-Series Emulation (with PCL-II)....................................................144
P-Series Emulation (With LG) ........................................................145
P-Series XQ Emulation .................................................................. 152
Serial Matrix Emulation .................................................................. 154
Proprinter XL Emulation ................................................................. 159
Epson FX Emulation ......................................................................163
ANSI Emulation ....................................................................................168
IGP/PGL Emulation ..............................................................................175
Features .........................................................................................175
Configuring The Emulation With The Control Panel.......................176
IGP/PGL Submenu ........................................................................177
IGP/PGL Submenu (With PCL-II)................................................... 178
IGP/PGL Submenu (With LG) ........................................................179
IGP/VGL Emulation ..............................................................................189
Features .........................................................................................189
Configuring The Emulation With The Control Panel.......................190
IGP/VGL Submenu ........................................................................190
IGP/VGL Submenu (with PCL-II)....................................................192
IGP/VGL Submenu (with LG).........................................................194
IPDS Emulation ....................................................................................205
PCL - II Emulation................................................................................. 209
LG Emulation ........................................................................................ 213
PRINTER CONTROL ...........................................................................218
ADVANCED USER...............................................................................221
DIAGNOSTICS ..................................................................................... 227
DATE ....................................................................................................230
Printer MGMT .......................................................................................231
5 Interfaces............................................................ 233
Overview...............................................................................................233
Dataproducts Parallel Interface ............................................................234
Dataproducts Parallel Interface Signals .........................................235
Centronics Parallel Interface................................................................. 236
Centronics Parallel Interface Signals ............................................. 237
IEEE 1284 Parallel Interface................................................................. 238
Compatibility Mode......................................................................... 238
Nibble Mode ...................................................................................238
Table of Contents
Byte Mode ...................................................................................... 238
Signals ...........................................................................................239
Terminating Resistor Configurations..............................................241
RS-232 And RS-422 Serial Interfaces.................................................. 244
RS-232 ........................................................................................... 244
RS-422 ........................................................................................... 245
6 Reprogramming the Security Key....................... 247
Reprogramming The Security Key........................................................ 247
How To Program The Security Key................................................ 247
7 Troubleshooting ..................................................249
Cleaning Requirements ........................................................................249
Exterior Cleaning............................................................................ 249
Interior Cleaning .............................................................................250
Diagnosing Problems............................................................................252
Bar Code Verification .....................................................................252
Printing A Hex Dump...................................................................... 253
Fault Messages..............................................................................254
A Printer Specifications.......................................... 285
Ribbon Specifications ........................................................................... 285
Paper Specifications ............................................................................. 286
Printer Weight And Dimensions............................................................287
Environmental Characteristics.............................................................. 287
Electrical Characteristics ......................................................................289
Interfaces.............................................................................................. 289
Printing Rates .......................................................................................290
B ASCII Character Set........................................... 291
C Zero Tear Printer................................................ 293
Overview...............................................................................................293
Operation.............................................................................................. 294
Position The Paper Input And Adjust The Paper Guides ...............294
Load Paper..................................................................................... 296
Position The Paper Out Sensor .....................................................298
Set The Tear Bar Distance............................................................. 299
Set The Top Of Form .....................................................................300
Control Panel Menus ............................................................................301
Performance Limitations....................................................................... 302
Table of Contents
D Customer Support.............................................. 305
Printronix Customer Support Center..................................................... 305
Printronix Supplies Department ............................................................305
Corporate Offices..................................................................................306
E Communication Notices ..................................... 307
Notices..................................................................................................307
Energy Star...........................................................................................309
Product Recycling and Disposal........................................................... 309
Communication Statements..................................................................310
Lithium Battery Warning .......................................................................313
Software License Agreement................................................................314
Table of Contents
1 Introduction
Printer Overview
This chapter provides a general overview of your printer and the conventions
used within this manual.
Printronix P7000 Series Printers
The Printronix® P7000 Series Printers are the latest line matrix printers to
feature PSA3
models (see
offer software versatility and the latest refinements in printing technology. The
print mechanisms are housed in sound-insulated cabinets which make the
printer among the quietest line matrix printers in the world. Additionally, your
printer has a flexible architecture that allows you to add new features and
emulations as they become available.
LinePrinter Plus® is the standard emulation. LinePrinter Plus includes the
®
Epson
Proprinter
IGP®/PGL®, and IGP/VGL graphics enhancement emulations are available
as optional upgrades. No matter what emulation is installed, your printer is
easy to use. The message display and lights on the control panel
communicate with you directly and clearly. You can select every function on
your printer at the control panel, or you can send commands from the host
computer.
™ (Printronix System Architecture, third generation). All printer
Table 1 on page 12) are packaged in various configurations that
FX-1050, Printronix P-Series, P-Series XQ, Serial Matrix and
®
III XL emulations. Coax/Twinax, IPDSTM, ANSI®, LG, PCL2,
The printer model numbers indicate physical configuration and printing speed.
Model numbers beginning with P70 indicate pedestal models. Model numbers
beginning with P72 indicate cabinet models. The final two digits in the model
number (except for P7080 and P7280) refer to the printer’s maximum speed
in lines per minute (lpm): 02 for 200 lpm, 03 for 300 lpm, 05 for 500 lpm,
06 for 600 lpm, 10 for 1000 lpm, 15 for 1500 lpm, and 20 for 2000 lpm.
11
Chapter 1 Printer Overview
Refer to the following table for a complete listing of model numbers and
options.
NOTE: H = H-Series
HD = High Density
HZT = H-Series Zero Tear
ZT = Zero Tear
Tabl e 1. The Printronix P7000 Series Printers
Model
Number
P7002H 200 lpm Pedestal
P7202HZT 200 lpm Zero Tear Pedestal
P7003HZT 300 lpm Zero Tear Pedestal
P7005 500 lpm Pedestal
P7005ZT 500 lpm Zero Tear Pedestal
P7205 500 lpm Cabinet N/A
P7006HZT 600 lpm Zero Tear Pedestal
P7010 1000 lpm Pedestal
P7010ZT 1000 lpm Zero Tear Pedestal
P7015 1500 lpm Pedestal
P7015ZT 1500 lpm Zero Tear Pedestal
P7080HD 133 lpm Pedestal
P7080HDZT 133 lpm Zero Tear Pedestal
P7210 1000 lpm Cabinet Option
Print
Speed
Model Type
Power
Stacker
P7215 1500 lpm Cabinet Option
P7220 2000 lpm Cabinet Option
P7280HD 133 lpm Cabinet Option
Integrated Print Management System
The P7000 has a new feature that automatically monitors and communicates
ribbon life. Using a specially barcoded spool, the printer can automatically
detect when a new or used ribbon is loaded, and all ribbon properties. With a
sophisticated algorithm, the system monitors all jobs printed and
automatically updates the remaining ribbon life on the front panel display. This
allows the system administrator to have precise control over print quality and
consumable costs. The accurate presentation of available ribbon life allows
for efficient planning of print jobs. For example, you can install a new ribbon
before printing large print jobs.
12
Integrated Print Management System
When the ribbon life gets near the end point, the printer displays a ribbon low
message and flashes the indicator light. Printing will continue without
interruption. Once the ribbon reaches 0% remaining, the alarm sounds, the
indicator light flashes, the display updates, and printing pauses. If a new
ribbon is loaded, the system automatically detects the change, clears the
condition, and restarts the life at 100%. If it is not convenient to change the
ribbon immediately, press the Online key and it will resume printing for a few
minutes. This should be enough to complete the job. If not, repeat the same
procedure indefinitely to extend printing on the same ribbon.
Output Darkness
By default the system is configured to meet most user requirements.
However, some applications require that the output remains darker than the
nominal set point while some applications are less critical and could tolerate a
lighter final image. The system can easily adjust to this variability. A setting
under the Printer Control menu is available that allows the user to adjust the
final output. The range is as follows:
Normal (Default)
Darker +1 through +6
Lighter -1 through -10
The ribbon life indicator always cycles between 100% and 0%, but if a darker
setting is selected, zero will be reached more quickly.
If a lighter setting is selected, the system will extend the amount of printing it
takes to reach zero.
Ribbon Flipping
In some cases, the application’s print pattern is narrow enough where only
half of the ribbon is used when printing. In these cases, you can flip the ribbon
and use the other half. The Integrated Print Management System detects the
flip and resets the ribbon life to 100%.
NOTE: It is the user’s responsibility to ensure the print pattern is sufficiently
narrow to support flipping. If not, the ribbon life may falsely indicate
100% for the flipped ribbon.
Loading a Used Ribbon
You can take ribbons off the printer and reload it at a later time. The ribbon life
gauge automatically updates to reflect the correct remaining capacity.
NOTE: The ribbon must be reloaded back onto the same printer, and in the
same orientation as it was removed. If the used ribbon is loaded onto
a different printer, or if it is flipped over, it will incorrectly indicate the
ribbon as new.
Ribbon Log
The Integrated Printer Management System tracks all used ribbons. This data
allows you to monitor how many ribbons and ribbon types have been used on
the printer. This data is contained in the ribbon log. To print the ribbon log, see
page
227.
13
Chapter 1 Printer Overview
Consumable Monitoring With PrintNet Enterprise
The Integrated Print Management System works with PrintNet Enterprise
(PNE). PNE allows a system administrator to remotely view the current
consumable status of all printers. PNE can be configured to deliver alerts on
all consumable warnings. When a ribbon reaches the low state, PNE notifies
the system administrator remotely via an automated e-mail alert of the low
condition. This allows corrective action to be taken before the ribbon reaches
its end of life. If the ribbon is not changed, an alert will again be initiated once
the ribbon reaches the 0% end point. Refer to your PrintNet Enterprise
Remote Management Software manual for details.
Graphics Enhancements
The IGP/PGL and IGP/VGL emulations allow you to create and store forms,
generate logos, bar codes, expanded characters, and create other graphics.
Alphanumeric and bar code data are added as the form is printed.
These emulations are available as factory-installed or field-installed options.
For more information, contact your authorized service representative.
Taking Care Of Your Printer
Your printer will produce high print quality jobs if it is well taken care of.
Periodic cleaning, handling the printer properly, and using the correct printer
supplies such as ribbon and paper ensures optimum performance. Chapter
explains how to clean the printer, and printer supplies are listed in
Appendix A.
7
14
Conventions In This Manual
All uppercase print indicates control panel keys.
Example: Press the CLEAR key, then press the ON LINE key.
Quotation marks (“ ”) indicate messages on the Liquid Crystal Display (LCD).
Example: Press the ON LINE key. “OFFLINE” appears on the LCD.
The + (plus) symbol represents key combinations.
Example: “Press = + >” means press the = (UP) key and the
> (DOWN) key at the same time.
Warnings And Special Information
Read and comply with all information highlighted under special headings:
WARNING
CAUTION
IMPORTANT
A warning notice calls attention to a condition that could harm you.
A caution notice calls attention to a condition that could damage the
printer.
Information vital to proper operation of the printer.
NOTE: A note gives you helpful tips about printer operation and
maintenance.
Related Documents
•
Maintenance Manual —
matrix printer at the field service level of maintenance.
•
Coax/Twinax Programmer's Reference Manual —
codes and character sets for the Coax and Twinax emulations.
•
Coax/Twinax Programmer's Reference Manual for the Simple Protocol
Converter Option —
the Coax and Twinax Simple Protocol Converter emulations.
•
LinePrinter Plus Programmer's Reference Manual —
control codes for the LinePrinter Plus emulation.
•
IGP/PGL Programmer's Reference Manual —
with the optional IGP Printronix emulation enhancement feature.
Explains how to maintain and repair the line
Covers the host control
Covers the host control codes and character sets for
Covers the host
Provides information used
•
•
•
•
IGP/VGL Programmer's Reference Manual —
with the optional Code V
ANSI Programmer's Reference Manual —
and character sets for the ANSI emulation.
IPDS Twinax Emulation Programmer's Reference Manual —
overview of Intelligent Printer Data Stream
and diagnostics.
Character Sets Reference Manual —
the character sets available in line matrix printers.
TM
emulation enhancement feature.
Information about and examples of
Provides information used
Provides host control codes
TM
(IPDS) features, commands,
Provides an
15
Chapter 1 Contact Information
•
Integrated Network Interface Card User's Manual —
network protocols, configuration, and operation.
•
External Network Interface Card User’s Manual —
network protocols, configuration, and operation.
Contact Information
Printronix Customer Support Center
Information about
Information about
IMPORTANT
Please have the following information available prior to calling the
Printronix Customer Support Center:
• Model number
• Serial number (located on the back of the printer)
• Installed options (i.e., interface and host type if applicable to the problem)
• Configuration printout (Press PRT CONFIG on the control panel, then
press Enter)
• Is the problem with a new install or an existing printer?
• Description of the problem (be specific)
• Good and bad samples that clearly show the problem (faxing of these
samples may be required)
Americas (714) 368-2686
Europe, Middle East, and Africa (31) 24 6489 410
Asia Pacific (65) 6548 4114
China (86) 800-999-6836
http://www.printronix.com/public/servicessupport/default.aspx
Printronix Supplies Department
Contact the Printronix Supplies Department for genuine Printronix supplies.
Americas (800) 733-1900
Europe, Middle East, and Africa 33 (0) 1 46 25 19 07
Asia Pacific (65) 6548 4116
China (86) 400-886-5598
http://www.printronix.com/public/supplies/default.aspx
16
or (65) 6548 4182
Corporate Offices
Printronix, Inc.
14600 Myford Road
P.O. Box 19559
Irvine, CA 92623-9559
Phone: (714) 368-2300
Fax: (714) 368-2600
Printronix, Inc.
Nederland BV
P.O. Box 163, Nieuweweg 283
NL-6600 Ad Wijchen
The Netherlands
Phone: (31) 24 6489489
Fax: (31) 24 6489499
Printronix Schweiz GmbH
42 Changi South Street 1
Changi South Industrial Estate
Singapore 486763
Phone: (65) 6542 0110
Fax: (65) 6546 1588
Corporate Offices
Printronix Commercial (Shanghai) Co. Ltd
22F, Eton Building East
No.555, Pudong Av.
Shanghai City, 200120, P R China
Phone: (86) 400 886 5598
Fax: (86-21) 5138 0564
Visit the Printronix web site at www.printronix.com
17
Chapter 1 Contact Information
18
2 Setting Up The Printer
Before You Begin
Read this chapter carefully before installing and operating the printer. The
printer is easy to install. However, for your safety and to protect valuable
equipment, perform all the procedures in this chapter in the order presented.
Power Requirements
The printer must be connected to a power outlet that supplies AC 100V to
240V +/- 10% at 50 to 60 Hz. The printer automatically senses and adjusts
itself to conform to the correct voltage range.
Primary circuit protection is provided by the power switch, which is also a
circuit breaker. Consult an electrician if printer operation affects local
electrical lines.
IMPORTANT
Select A Site
Printer power should be supplied from a separate AC circuit protected
at 10 amperes for 100 - 120 volts or 5 amperes for 200 - 240 volts at 50 or
60 Hertz.
Select a printer site that meets all of the following requirements:
• Permits complete opening of the printer cover and doors.
• For cabinet models, allows at least three feet of clearance behind the
printer. (This permits air to circulate freely around the printer and provides
access to the paper stacking area.)
• Has a standard power outlet that supplies 88-135 Volts AC or
178-270 Volts AC power, at 47 to 63 Hz.
• Is relatively dust-free.
• Has a temperature range of 10° C to 40° C (50° F to 104° F) and a
relative humidity from 15% to 90% non-condensing.
• Is located within the maximum allowable cable length to the host
computer. This distance depends on the type of interface you plan to use,
as shown in
Table 2.
19
Chapter 2 Printer Dimensions
Table 2. Maximum Interface Connection Cable Length
Interface Type Maximum Cable Length
Centronics Parallel 5 meters (15 feet)
Dataproducts Parallel 12 meters (40 feet)
IEEE 1284 Parallel 10 meters (32 feet)
Serial RS-232 15 meters (50 feet)
Serial RS-422 1220 meters (4000 feet)
Coax 1500 meters (4920 feet)
Twinax 1500 meters (4920 feet)
Twinax (shielded cable) 1500 meters (4920 feet)
Twisted Pair / Type 3 300 meters (985 feet)
Ethernet 10/100Base-T 100 meters (328 feet)
Printer Dimensions
27.0 in
(68.84 cm)
83.0 in
(210.8 cm)
(73.7 cm)
183468a
29.0 in
27.0 in
(68.6 cm)
27.0 in
(68.6 cm)
41.0 in
(104 cm)
57.5 in
(146.1 cm)
Figure 1. Printer Dimensions - Cabinet Model
20
183469a
42.5 in
27.0 in
(107.8 cm)
(68.6 cm)
32.5 in
83.0 in
(210.8 cm)
(82.6 cm)
27.0 in
(68.6 cm)
27.0 in
(68.6 cm)
32.0 in
(81.3 cm)
Figure 2. Printer Dimensions - Cabinet Model with Paper Stacker
59.0 in
(149.9 cm)
21
Chapter 2 Printer Dimensions
(63.5 cm)
10.5 in.
(26.67 cm.)
25 in.
48.0 in.
(122 cm)
183470a
30 in.
24.6 in.
(62.48 cm)
(76.2 cm.)
Figure 3. Printer Dimensions - Pedestal Model
22
Printer Component Locations
Barcode
Printer Component Locations
Ribbon
Ribbon Spool
Ribbon Hub
Date Code Label
Splined Shaft
Tractor (2)
Hammer Bank
Cover and
Ribbon Mask
183471a
Blue Tractor
Lock (2)
Paper Support (2)
Barcode Sensor
Ribbon Guide (2)
Platen Stop
Figure 4. Printer Component Locations
Vertical
Position Knob
Platen Lever
23
Chapter 2 Printer Component Locations
24
3 Operating The Printer
Powering On The Printer
When you power on the printer, it executes a self-test. The default power-up
state is online. When the self-test completes and the software has initialized
successfully, the status indicator light turns on, indicating the printer is online.
The default value of the type of emulation you have installed appears in the
upper right corner of the display. The ribbon life remaining is shown on the
second line.
If there is a fault during the self-test, the status indicator flashes and a specific
fault message appears on the display (such as “LOAD PAPER”). The alarm
also sounds if it is configured to do so. See “ LCD Message Troubleshooting
Table” on page
Operating Modes
254 for information on fault messages and solutions.
Online. In online mode, the printer can receive and print data sent from the
host. Pressing the ON LINE key toggles the printer from online to offline
mode. The status indicator is lit in online mode.
Offline. In offline mode, you can perform operator functions, such as loading
paper and setting top-of-form. You can also move within the printer
configuration menus. Pressing the ON LINE key toggles the printer from
offline to online mode. The status indicator is off in offline mode.
Fault. In fault mode, a condition exists which must be cleared before printing
can continue. The status indicator flashes, the alarm beeps (if configured to
sound), and a descriptive fault message displays.
The current operating mode can be selected via control panel keys or can
result from routine operations such as powering on the printer.
25
Chapter 3 The Control Panel
The Control Panel
Figure 5 shows the keys, displays, and indicators as they appear on the
control panel. The following section provides the descriptions, and functions
of the control panel keys.
Key combinations are indicated with the plus (+) sign. For example, “Press
+
” means to press the key and the key at the same time.
Circular
Pad
JOB SELECT
Circular
Pad
PRT CONFIG
ENTER
PRT CONFIG
SET TOF
Ribbon Life
Indicator
SET TOF
Message Display
ONLINE <PGL>
RIBBON LIFE 100%
ON LINE/CLEAR
Message Display
Emulation
VIEW/EJECT
PAPER ADVANCE
Emulation
Status Indicator
CANCEL
Status Indicator
JOB SELECT
ENTER
Ribbon Life
26
ONLINE <PGL>
RIBBON LIFE 100%
ON LINE/CLEAR
Indicator
Figure 5. Control Panel
VIEW/EJECT
PAPER ADVANCE
183452a
CANCEL
Control Panel Keys
Control Panel Keys
ON LINE / CLEAR
Toggles the printer between online and offline modes. If a fault condition
exists, pressing this key will clear the fault message and return the printer
from fault mode to offline mode.
NOTE: If the fault condition is not corrected
message will reappear when attempting to place the printer online.
before
pressing this key, the fault
PAPER ADVANCE
Performs advance to top-of-form, as defined by the current active form length.
The key works both online and offline.
• If online with data in the printer buffer, the data will print and then the
paper will move to the next top-of-form.
• In the fault state, PAPER ADVANCE will advance the paper. The first
press moves to the top of the next available form. All subsequent presses
advances one forms length as defined by the current active forms length.
•
VIEW / EJECT
When the printer is online or offline, pressing this key executes the view or
eject function, depending on whether the printer is a cabinet or a pedestal (or
zero tear pedestal).
If online with data in the printer buffer, the data prints and the key functions as
described below.
If in a fault state, this key will be ignored.
• View Function — for cabinet models, pressing the
VIEW/EJECT key moves the last data printed to the tractor area for
viewing. While in the view state, the message "Printer in View" displays,
pressing the UP or DOWN arrow keys moves the paper up or down in 1/
72 inch increments. This is done to align the image within a pre-printed
form, for example. Refer to the UP and DOWN key functions for additional
details on the microstep feature. Pressing VIEW/EJECT a second time
moves the paper back to the adjusted print position.
Eject Function — for pedestal models, when the VIEW/EJECT key is
pressed, the bottom of the last printed form will move to the tear bar position.
The message "READY TO TEAR/EJECT To Return" displays. While in this
position, pressing the UP or DOWN arrow keys moves the paper up or down
in 1/72 inch increments. Refer to the Up and Down key functions for additional
details on the microstep feature. When the VIEW/EJECT key is pressed a
second time, the printer will move the paper to enable printing on the next
available form.
27
Chapter 3 The Control Panel
CANCEL
In offline mode, this key cancels all data in the print buffer, if enabled in the
“ADVANCED USER” menu (see page 221). The print buffer is cleared without
printing any of the data and the current paper position is set as the top-ofform. If this function is disabled, the CANCEL key will be ignored.
NOTE: Use of this key will cause loss of data
SET TOF
Sets the top-of-form on the printer. This key is active only when the printer is
offline and will not operate if the printer is in a fault condition. The paper
moves down to the print position and aligns to the top-of-form. Refer to the
Quick Setup Guide
NOTE: If there is any data in the buffer, the paper will move to the last print
position.
.
for complete instructions on how to set the top-of-form.
PRT CONFIG
In offline mode, PRT CONFIG prints the current short configuration. This key
requires a confirmation with the ENTER key; pressing any other key will exit
from this function. See
explanation of configuration menus.
“The Configuration Menus” on page 47 for an
JOB SELECT
In offline mode, this key allows for fast selection of any of the previously
stored configurations. Pressing this key causes the printer to cycle through
the following messages: Load Config., Factory Config, Load Config 1, Load
Config 2, Load Config 3,...,Load Config 8.
ENTER
When navigating the configuration menus, ENTER selects the currently
displayed option value as the active value. An asterisk (*) appears next to the
active value on the display. ENTER is also used for starting and stopping
printer tests and generating a configuration printout.
NOTE: The ENTER key must be unlocked in order to function.
See UP + DOWN, below.
The ENTER key lock and unlock function can be configured to be a
key combination other than
= + > (see page 225).
28
Control Panel Keys
UP or DOWN ( = or > )
Moves up or down between levels in the configuration menus and makes
vertical forms adjustment. After pressing VIEW, press
paper up or down in 1/72 inch increments for fine vertical forms alignment.
When the printer is in offline mode, press
configuration menus.
= or > to move through levels in the
= or > to adjust the
UP + DOWN ( = + > )
Locks and unlocks the ENTER key.
NOTE: The ENTER key lock and unlock function can be configured to be a
key combination other than
= + > (see page 225).
PREV or NEXT ( ; or < )
Moves between the options on the current level of configuration menu. In the
configuration menu, press
through the menu selections on the same level.
; to scroll backward or press < to scroll forward
PREV + NEXT ( ; + < )
When both keys are pressed simultaneously, the printer will reset to the
power-up configuration and reset its internal state (in offline mode).
= + ON LINE (IPDS Emulation only)
In offline mode, press = + ON LINE. If there is data in the printer buffer, the
printer will be placed in online mode, print one page, and return to the offline
mode. This action can be repeated until the end of a print job. Only one page
prints each time you press
= + ON LINE. If there is no data in the printer buffer, the printer is placed in
online mode.
In the fault state, = + ON LINE does not work.
= + PAPER ADVANCE (IPDS Emulation only)
In offline mode, press = + PAPER ADVANCE. The printer will perform a
reverse linefeed. If you hold down the
than 1/2 second, the printer moves to the previous top-of-form position. If
there is data in the printer buffer, the data does not print.
In the fault state, = + PAPER ADVANCE does not work.
= + PAPER ADVANCE keys for longer
= + VIEW (IPDS Emulation only)
In offline mode, press = + VIEW. If there is data in the IPDS printer buffer, the
printer will be placed in online mode, print one line, and return to offline mode.
This action can be repeated until the end of the job. This function prints only
one line of text. If the data is not text, only 1/6 inch prints. If there is no data in
the printer buffer, the printer is placed in online mode for one second and then
returns to offline mode.
In the fault state, = + VIEW does not work.
29
Chapter 3 Operational Procedures
Ribbon Life Indicator
The second line of the LCD displays the remaining life of the currently
installed ribbon. The default settings for this feature should match the
requirements for most applications; no special user setup is needed. If your
particular application requires darker printing or can tolerate lighter printing,
the ribbon end point can be adjusted as appropriate. Please refer
End Point” on page 68.
Operational Procedures
This section contains routine printer operating procedures on how to:
• reload paper
• unload paper
• cancel a print job.
Reload Paper
“Ribbon
Do this procedure when “LOAD PAPER” displays. (This message occurs
when the last sheet of paper passes through the paper slot.) This procedure
reloads paper without removing the last sheet of the old paper supply, while
retaining the current top-of-form setting.
183472a
Cabinet Models
Paper Slot
Metal Paper Guide
(P7220 Only)
Paper Slot
183473a
Pedestal Models
1. Raise the printer cover. Raise the platen lever as far as it will go.
(See Figure 4 on page 23 for the location of the lever.)
2. Press ON LINE/CLEAR to turn off the alarm. Do not open the tractor
doors or remove the existing paper.
3. For cabinet models, open the front door. Align the paper supply with the
label on the floor. Ensure the paper pulls freely from the box.
30
Figure 6. Paper Slot Location
Loading...