Prince Castle 943-BMC Service Manual

TOMATO SABER

PRINCE CASTLE NO. 943-BMC & 943-DMC

PRINCE CASTLE INC.

CAROL STREAM, IL 60188 USA

PHONE [phone]

TOLL FREE NUMBER

1-800-323-2930

FAX: [phone]

TABLE OF CONTENTS

WARRANTY .................................................................................................................................... Page 1

INTRODUCTION ............................................................................................................................. Page 2

PARTS IDENTIFICATION/FUNCTION ......................................................................................... Page 2

EXPLODED VIEW .......................................................................................................................... Page 3

EQUIPMENT SET-UP, TOMATO SLICING AND CLOSE PROCEDURES................................ Page 4-5

NON-SCHEDULED MAINTENANCE ............................................................................................. Page 5-6

TROUBLESHOOTING GUIDE ....................................................................................................... Page 6

ORDERING/SERVICE INFORMATION......................................................................................... Page 6

LIMITED WARRANTY

This product is warranted to be free from defects in material and/or workmanship for a period of two (2) years
from date of original installation, not to exceed 30 months from date of shipment from our factory with the
exception of the blade cartridge. Blade cartridge is warranted to be free from defects at time of delivery
only.

Any component which proves to be faulty in material and/or workmanship will be replaced or repaired (at the
option of Prince Castle, Inc.) without cost (including freight and duty) to the customer for parts or labor.

This warranty is subject to the following exceptions/conditions:

l Use of products other than tomatoes will void this warranty.

l This equipment is portable; charges for on-location service (e.g., trip charges, mileage) are not included

in the provisions of this warranty.

l Damage caused by carelessness, neglect, and/or abuse (e.g., dropping, tampering or altering parts),

equipment damaged in shipment, by fire, flood or an act of God is not covered under this warranty.

This manual is for the exclusive use of licensees and employees of McDonalds Systems, Inc.

Part No. 943-501

Printed in December

EM MISC 18

-

The United States of America

Printed in

INTRODUCTION

Prince Castles Tomato Saber slicer is designed to
precisely slice whole tomatoes. With the exclusive
Perma-Tight disposable blade cartridge system,
this unit never requires blade tightening or adjusting.
Engineered for durability and long life, the Tomato
Saber features self-lubricating bearings, a safety
shield, and a contoured Tomato Pusher Assembly.
The unit is shipped with a Tomato Catcher, Table
Stop Assembly, and a cleaning brush.

Hazard Communication Standard (HCS) The
Procedure(s) in this equipment manual include the
use of chemical products. These chemical products
will be highlighted with bold face letters followed by
the abbreviation (HCS) in the text of the manual.
See the Hazard Communication Standard (HCS)
Manual for the appropriate Material Safety Data
Sheet(s) (MSDS).

PARTS IDENTIFICATION/FUNCTION

PART

ITEM DESCRIPTION QTY.

1 943-039A Blade Assy. 1/4  (6.35 mm)

2 943-047S Table Stop w/Knobs 1 Prevents slicer from moving.

3 943-049S Pusher Handle w/Mounting Screw 1 Provides means for pushing tomato

NO.

1 Provides cutting edge for slicing tomato.

943-041A Blade Assy. 7/32 (5.5 mm)

through blades.

FUNCTION

4 943-051 Tomato Pusher Assy. 1/4 (6.35 mm)

943-052 Tomato Pusher Assy. 7/32 (5.5 mm)

5 943-004S Bridge w/Mounting Screws 1 Positions blade cartridge.

6 943-018S Tomato Catcher 1 Captures tomato slices.

7 943-033S Guide Rod Knobs (Pkg. of 2) 2 Keeps guide rods in place.

8 943-067 Blade Guard 1 Prevents contact with sharp blades.

9 943-002S Base 1 Supports the slicer.

10 89-959S Rubber Foot (Pkg. of 4) 4 Provides non-skid surface.

11 943-034S Blade Latch Kit 1 Retains blade cartridge in place.

12 943-006S Carriage assembly with bearings 1 Provides a support for the Pusher Head and

13 943-017S Guide Rods w/Cushions (Set of 2) 2 Provides sliding surface for pusher head

1 Provides cutting edge for slicing tomato.

handle, and is a sliding surface for the tomato.

and carrier assembly.

14 919-17S Guide Rod Cushions (Pkg. of 4) 3 Cushions the forward motion of the carrier

assembly to prevent wear.

2