Prima PIC004 User Manual

EEC DECLARATION OF CONFORMITY

This product conforms to the essential requirements of:

1. The Electromagnetic Compatibility Directive 89/336/EEC and, where
appropriate, all modifications & amendments thereto.

2. Low Voltage Directive 73/23/EEC and, where appropriate all modifications &
amendments thereto.

Prima International Plc, Prima House, Premier Park, Oulton, LEEDS LS26 8ZA,
United Kingdom

IMPOR TANT SAFEGUARDS

1. Read all instructions before using the product

2. To protect against risk of electrical shock do not immerse product in water or

other liquid. Do not over fill the water tank.

3. Close supervision is necessary when this product is used by or near children.

4. Unplug from outlet when not in use, before putting on or taking off parts and

before cleaning.

5. Do not operate product with a damaged cord or plug or after the appliance

malfunctions, or is dropped or damaged in any manner. Return appliances
to the nearest authorised service facility for examination, repair or electrical
or mechanical adjustment.

7. The use of attachments not recommended or sold by manufacturer may

cause, fire electric shock or injury.

8. Do not use outdoors.

9. Do not place product on or near a hot burner or any other kind of heating

device.

12. Do not use product for other than intended use.

PLEASE SAVE THESE INSTRUCTIONS

CONNECTION TO THE MAINS SUPPLY

The wires in the mains lead are coloured in accordance with the following code:

BROWN - LIVE (L)
BLUE - NEUTRAL (N)

As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:

• The BLUE wire is the NEUTRAL and must be connected to the terminal which is
marked with the letter N or coloured BLACK

• The BROWN wire is the LIVE and must be connected to the terminal which is
marked with the letter L or coloured RED.

Always ensure that the cord grip is positioned and securely fastened.

WARNING: ON NO ACCOUNT MUST EITHER THE LIVE OR NEUTRAL WIRES

BE CONNECTED TO THE EARTH TERMINAL

Ice Crusher

Model: PIC004

User Guide

Visit our web site!

www.prima-international.com

~~~~~ Warranty ~~~~~

This product is guaranteed for 12 months from the date of purchase when the
appliance is used solely for domestic purposes. For commercial use the product is
guaranteed for 90 days from the date of purchase.

The guarantee is valid against mechanical or electrical defects if the product is used
in accordance with the instructions and provided that it is not connected to an
unsuitable electricity supply or dismantled, interfered with or damaged in any way.

IMPORTANT, PLEASE RETAIN THIS WARRANTY
Please ask your retailer to either stamp this part of the instruction book and date it

accordingly or simply attach your store receipt. Keep this warranty so mewhere safe.
DO NOT SEND IT TO PRIMA .

This guarantee in no way affects your rights under statutory law.
IF THE PRODUCT MALFUNCTIONS DURING ITS WARRANTY PERIOD IT MUST

BE RETURNED TO THE RETAILER FROM WHOM IT WAS PURCHASED FOR
REPLACEMENT. IF YOU BO U G HT THIS PRODUCT VIA MA IL ORDER, PLEASE
KEEP ALL THE DOCUMENTATION THAT CAME WHEN THE UNIT WAS
DELIVERED.

INTENDED USE

The Prima Ice Crusher is for crushing cubes of pure water ice. The appliance must
not be used for crushing cubes containing fruit juices or anything other than water. To
do so could damage/corrode internal components and could also invalidate your
warranty.

USING THE ICE CRUSHER

1. Place the Ice Crusher on a level, non-slip surface

2. Insert the mains wall socket (220-240V)

3. Remove the clear plastic lid

4. Using the ice scoop provided put 3 or 4 ice cubes into the hinged ice
filler compartment. Note: The size of the cubes should not be more than
the standard 1” x 1” x 1” (25 x 25 x 25cm) variety.

5. The hinged flap springs shut for safety.

6. Turn on the machine by pushing the switch into the on position. Note
that the switch will spring back into the off position if you let go of it, so
you need to hold the switch in the on position until all the ice has been
processed. This only takes a few seconds for each load of ice cubes.

7. Repeat the process until you have crushed enough ice for your needs
or until the ice collection bowl is full.

8. Important safety note: never put your fingers or any utensil into
the processing chamber to free any trapped ice

CLEANING

1. Before cleaning, always unplug the appliance

2. Wipe outside of the appliance with a paper towel or a soft cloth moistened
with a little water. It should not be washed in a dishwasher.

3. Do not clean the inside or outside with any abrasive scouring pad or steel
wool as this will damage the finish.

4. Do not immerse in water or any other liquid although you can pour a little
water into the ice chamber. However, only use cold water and never use
detergent.

5. After cleaning leave the clear plastic lid off for a while to allow the machine to

dry thoroughly.