Prima PFP600 User Manual

Food Processor

Instruction Leaflet

MODEL PFP600

Visit our website at www.BuyPrima.com

FOOD PROCESSOR MODEL: PFP600

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE

APPLIANCE. KEEP THEM HANDY FOR FUTURE REFERENCE

SAFETY AND OPERATING INSTRUCTIONS

IMPORTANT: YOUR MULTI FOOD PROCESSOR IS EQUIPPED WITH A POWERFUL
HIGH TORQUE MOTOR. PROCESSING OF FOOD CAN BE DONE WITHIN A SHORT

TIME OF OPERATION. DURING OPERATION, MAKE SURE THAT THE PROCESSOR

IS NOT SWITCHED ON CONTINUOUSLY FOR LONGER THAN THE TIME SPECIFIED

AND ALSO ALLOW ENOUGH REST TIME BEFORE THE NEXT OPERATION.

• When using any electrical appliance, basic safety precautions should always be
observed.

• Use only on AC 230 volts 50 Hz.

• Always unplug the appliance immediately after use. Unplug the cord by grasping the

plug --- do not pull on th e cord.

• Never put the Motor Unit (A4) under a tap or in a dishwasher, simply wipe with a
damp cloth.

• The Processor Bowl (A6) can simply be washed by dishwasher or in the usual way
under the tap. Handle the blades carefully, they are extremely sharp.

• Never touch moving parts.

• Do not use boiling liquids for mixing and washing.

• Always use the Pusher (A1) to push food down the feed chute. Never use your

fingers, or any utensil.

• Never attempt to put food or liquid in to or out of the Processor Bowl (A6) when the
blade is moving. Always wait until the blade stops completely.

• Use only the accessories provided with this processor.

• The appliance should always be returned to an approved Service Centre for

adjustment or repair if required.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service

agent.

WARNING

• This appliance should be used strictly in accordance with these instructions.

• Never try to operate the appliance without the Processor Bowl (A6) in place so as to

avoid accidentally touching the moving blade.

• Care is needed when handling the cutting blades.

• Always switch off the appliance, before changing accessories.

HOW TO ASSEMBLE YOUR MULTI FOOD PROCESSOR

Parts Description

Before you actually assemble & use
your MULTI FOOD PROCESSOR,
please see Figures from A to E for the
relevant description of parts
shown below:

A
A1 Pusher
A2 Pulse Button
A3 Handle
A4 Motor Unit
A5 Bowl Lid with Feed Chute
A6 Processing Bowl
A7 Bowl Axle

B Blade Stick

C Whisk Stick

D Disks
D1 Spindle
D2 Chipping Disk
D3 Chipping Blade
D4 Reversible Grating/Slicing Disk
D5 Grating Blade
D6 Slicing Blade

E Whisk Blade