Prima PDF400 User Manual

Twin Professional Fryer

Model: PDF400

Visit our website!

www.buyprima.com

Important safeguards

First read all instructions before use and retain for later reference.
Before first use, remove the packing materials and wash the accessories and the inner pan in

warm water. Dry well before use. Make sure that the electrical parts remain dry. The deep fryer is
equipped with an adjustable thermostat and an indicator lamp. The ‘open’ frying system ensures
excellent professional results and easy cleaning.

Essential Safety Information

• THE LIDS SHOULD BE REMOVED AND KEPT OFF DURING COOKING

• Always place the deep fryer on a level, stable surface and keep all flammable materials

away.

• Make sure that the deep fryer is not near or on a hot plate or gas hob.

• Before you use the deep fryers they must be filled with the required amount of oil. Never

fill the fryer past the maximum level indicated on the wall of the inner bowl.

• Never use the deep fryers without oil or below the MIN level because this could damage
the elements.

• Never move the deep fryer during use. The oil becomes very hot and you can get
burned. Wait to move the deep fryer until the oil has cooled off.

• The deep fryer is protected with a thermal safety device, which switches the machine off
automatically if it overheats.

• Never immerse the element assembly or control panels in water.

• Never leave the deep fryer unattended while in use. Always ensure the safety of

children if they are near the deep fryer.

• If the deep fryer and/or cord are damaged a professional service department must repair
them. Do not try to repair the unit yourself or replace a damaged cord. This requires
special tools.

• Be sure not to damage the heating element. (Do not bend or dent)

• THIS APPLIANCE IS EQU IPPED WITH A SAFETY CUT- OFF, WHICH ENSURES TH AT

THE HEATING ELEMENT CAN ONLY FUNCTION WHEN THE ELEMENT IS
CORRECTLY PLACED ON THE FRYER.

• In the case of overheating, the thermal protective device will switch off the fryer
automatically. This device is a small red button found either on the underside of the
electrical component, or in the cord storage compartment. It can be re-activated by
pushing the button in again with a pointed object (e.g a pen). Disconnect from mains

THE TWO FRYERS TOGETHER. ALWAYS USE A PROPER DOUBLE WALL

before re-activating. !

EACH FRYER MUST BE CONNECTED TO IT’S OWN MAINS WALL

SOCKET – DO NOT USE A DOUBLE ADAPTOR OR ATTEMPT TO WIRE

SOCKET OR TWO SEPARATE SOCKETS