Prima PDF200 User Manual
Stainless Steel Deep Fat
Fryer
Model: PDF200
Visit our website!
www.buyprima.com
Important safeguards
First read all instructions before use and retain for later reference.
Before first use, remove the packing materials and wash the accessories and
the inner pan in warm water. Dry well before use. Make sure that the electrical
parts remain dry. The deep fryer is equipped with an adjustable thermostat and
an indicator lamp. The ‘open’ frying system ensures excellent professional
results and easy cleaning.
Essential Safety Information
• THE LID SHOULD BE REMOVED AND KEPT OFF DURING
COOKING
• Always place the deep fryer on a level, stable surface and keep all
flammable materials away.
• Make sure that the deep fryer is not near or on a hot plate or gas hob.
• Before you use the deep fryer it must be filled with the required amount
of oil. Never fill the fryer past the maximum level indicated on the
wall of the inner bowl.
• Never use the deep fryer without oil or below the MIN level because this
could damage the element.
• Never move the deep fryer during use. The oil becomes very hot and
you can get burned. Wait to move the deep fryer until the oil has
cooled off.
• The deep fryer is protected with a thermal safety device, which switches
the machine off automatically if it overheats.
• Never immerse the element assembly in water.
• Never leave the deep fryer unattended while in us e. Alw ays ensure
the safety of children if they are near the deep fryer.
• If the deep fryer and/or cord are damaged a professional service
department must repair them. Do not try to repair the unit yourself or
replace a damaged cord. This requires special tools.
• Be sure not to damage the heating element. (Do not bend or dent)
• THIS APPLIANCE IS EQUIPPED WITH A SAFETY CUT-OFF, WHICH
ENSURES THAT THE HEATING ELEMENT CAN ONLY FUNCTION
WHEN THE ELEMENT IS CORRECTLY PLACED ON THE FRYER.
• In the case of overheating, the thermal protective device will switch off
the fryer automatically. This device is a small red button found either
on the underside of the electrical component, or in the cord storage
compartment. It can be re-activated by pushing the button in again with
a pointed object (e.g a pen). Disconnect from mains before reactivating. !
Loading...