Premier Mounts PSD-BW, PSD-BWL User Manual 2

INSTALLATION MANUAL

PSD-BW/PSD-BWL

Nesting Cart Series

NORTH AMERICA EUROPE

3130 East Miraloma Avenue

Anaheim, CA 92806 USA

USA and Canada –

Phone: [phone]

Fax: [phone]

Other Locations – Phone: [phone]; Fax: [phone]

©Premier Mounts 2007

9532-003-011-01

Shilton, Coventry, England CV79JY

Swallow House,

Shilton Industrial Estate,

Phone: [phone]

Fax: [phone]

AUSTRALIA,NEW ZEALAND,

OCEANIA (Distributor)

P.O. Box 295

Mordialloc Victoria 3195

Australia

Phone: [phone]

www.premiermounts.com.au

PSD-BW/L

Table of Contents

WARRANTY ....................................................................................................................................................- 2 -

CONTACT PREMIER MOUNTS ....................................................................................................................- 2 -

WARNING STATEMENTS .............................................................................................................................- 3 -

PARTS LIST ......................................................................................................................................................- 4 -

INSTALLATION TOOLS ................................................................................................................................- 4 -

BW BASE CASTOR INSTALLATION (FIGURE 1) ......................................................................................- 5 -

SUPPORT TUBE INSTALLATION (FIGURE 2) ...........................................................................................- 5 -

PSD-SPA INSTALLATION (FIGURE 3) ........................................................................................................- 6 -

PSD-BW/L NESTING CART STORAGE (FIGURE 4) ..................................................................................- 6 -

OPTIONAL MOUNTING CONFIGURATIONS .............................................................................................- 7 -

TECHNICAL SPECIFICATIONS ....................................................................................................................- 8 -

NOTES ...............................................................................................................................................................- 8 -

Warranty

Limited Lifetime Warranty

All Premier Mounts products carry a limited lifetime warranty from ship date against defects in materials and
workmanship. Premier Mounts is not liable for improper installation that results in damage to mounts, adapters,
display equipment or personal injury.

Contact Premier Mounts

In the event of missing and/or damage equipment, or technical questions, the following information can help in
the completion of the installation.

Customer Service – [phone]
Technical Support – [e-mail]

Installation Instructions Page - 2 -

PSD-BW/L

Warning Statements

WARNING:

WARNING:

WARNING:

WARNING:

DANGER: DO NOT ATTACH EQUIPMENT WEIGHING MORE THAN 75LBS. ABOVE THE 60”

PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE
USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE
FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY
DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF
WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER
RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
THE FLOOR STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST 250 LBS.
IF NOT, THE FLOOR STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION
PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE
INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.

SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE
ASSEMBLY OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE
ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE ASSEMBLY
INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE
ASSEMBLY INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND
PROPERTY DAMAGE. KEEP THESE ASSEMBLY INSTRUCTIONS IN AN EASILY
ACCESSIBLE LOCATION FOR FUTURE REFERENCE.

Indicates that the power plug is to be
disconnected from the power outlet.

Contact Premier Mounts with any
questions.

Safety precautions must be taken at all
times.

Warning and Caution statements.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do
so could result in damage to the plasma display and/or damage to the mounting surface.

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat
energy. Failure to do so may result in damage to the display and could increase the risk of fire.

At least two qualified people should perform the assembly procedure. Injury and/or damage can
result from dropping or mishandling the display.

MARKED LINE ON THE SUPPORT POLES. DOING SO MAY CAUSE THE NESTING
CART TO TIP OVER, RESULTING IN SEVERE PROPERTY DAMAGE AND/OR
PERSONAL INJURY.

Page - 3 - Installation Instructions

PSD-BW/L

Parts List

Congratulations on purchasing the PSD-BW/PSD-BWL Nesting Cart. The PSD-BW/PSD-BWL Nesting Cart is
shipped with all proper installation hardware and components. Please verify that none of these parts are missing
and/or damaged before assembly. If there are parts missing and/or damaged, please stop the assembly and
contact Premier Mounts [phone].

NOTE: Some mounting configurations will allow for a “landscape” orientation. In these situations, when

moving the PSD-BW/L Nesting Cart through a doorway, the orientation of the display must be
returned to the “portrait” orientation. If not, maneuvering through the doorway could prove costly by
damaging the display.

BW Base (Qty 1)

3” Castors (Qty 4)

(2 locking,

2 non-locking)

Support Tubes

(Qty 2)

NOTE

: Length will

vary depending on

model purchased.

PSD-SPA (Qty 1)

M8 x 10mm Set Screws

(Qty 6)

M10 Flat Washers

(Qty 4)

M10 x 12mm Hex

Head Screws

(Qty 4)

21mm Caster Wrench

(Qty 1)

Installation Tools

Socket head wrench Soft Material/ Blanket
M5 Allen Wrench (Supplied) 5/32” Allen Wrench (Supplied)

Installation Instructions Page - 4 -

PSD-BW/L

BW Base Castor Installation (Figure 1)

Unpack the PSD-BW/L Nesting Cart and review any WARNING statements that apply to the installation.
Select the desired location for the PSD-BW/L Nesting Cart.

Locking Castor

Non-Locking Castor

Figure 1

1. Place the BW/L on a flat surface.
NOTE

2. Insert each castor into the threaded mounting point located on the underside of the BW/L base (Figure 1). Turn each castor
clockwise to tighten. Make sure all four castors are tightened all the way until flush with the base. Tighten using the 21mm caster
wrench (supplied).

: Make sure the locking castors (Qty 2) are attached to the rear legs of the Nesting Cart.

Support Tube Installation (Figure 2)

1. Place the BW/L on a flat surface.

2. Take the support tubes and slide them over the mounting clamps that are located on the Nesting Cart.

NOTE

: To perform the following step, the access holes that are located at the end of the support tubes must line up with the
set screw holes on the mounting clamps. The upper access holes will be used for cable management once the display
has been mounted to the support tubes.

3. Insert the set screws into each hole and tighten using the supplied M5 Allen Wrench (Figure 2).
M5 Allen Wrench

Support Tubes

Access Holes

Mounting Clamps

PSD-BW/L Base

M10 x 35mm Set
Screw

Figure 2

Page - 5 - Installation Instructions

PSD-BW/L

PSD-SPA Installation (Figure 3)

NOTE: Use of the PSD-SPA will depend on the mount that is used. All PSM/CTM Series mounts require using the PSD-SPA.

The Revolution Series, USA and UFA Mounts, however, do not require the use of the PSD-SPA.

1. Slide the PSD-SPA over and down the support tubes.

2. Once the desired height has been determined, tighten the four (4) M8 x 10mm set screws, using the 5/32” Allen wrench (supplied)

to secure the PSD-SPA (Figure 3).

PSD-SPA

5/32” Allen Wrench

Support Tubes

Support Tubes

Figure 3

PSD-BW/L Nesting Cart Storage (Figure 4)

The PSD-BW/L is designed to maximize storage space. When storing multiple carts, slide the Nesting Carts together as close as
possible.

NOTE

: Please adhere to any WARNING statements that will apply to the different mounting configurations the PSD-BW/L

Nesting Cart will be used with.

Figure 4

Installation Instructions Page - 6 -

Optional Mounting Configurations

PSD-BW/L

CTM-Series Revolution Series

USA/UFA Series

Page 7 Installation Instructions

Technical Specifications

All measurements are in inches (mm).

PSD-BW/L

PSD-BW

PSD-BWL

Notes

Installation Instructions Page 8

Installation InstructionsInstallation InstructionsInstallation InstructionsInstallation Instructions

Rotary Tilt Mount

Model: RTM-L

NORTH AMERICA

3130 East Miraloma Avenue

Anaheim, CA 92806 USA

USA and Canada -

Phone: [phone]

Fax: [phone]

EUROPE

Swallow House,

Shilton Industrial Estate,

Shilton, Coventry, England CV79JY

Phone: [phone]

Fax: [phone]

Other Locations - Phone: [phone]; Fax: [phone]
©Premier Mounts 2007
9531-009-011-00

AUSTRALIA, NEW ZEALAND,

OCEANIA (Distributor)

P.O. Box 295

Mordialloc Victoria 3195

Australia

Phone: [phone]

www.premiermounts.com.au

RTM-L

TABLE OF CONTENTS

Warranty 2
Contact Premier Mounts 2
Warning Statements 3
Parts List 4
Installation Tools 4
Thread Depth Indicator 7
Mount Installation 8
Universal Mounting Bracket Installation 9
Display Orientation 11
Securing the Display 11
Tilt Positioning 12
Optional Configurations 12
Technical Specifications 12
Addendum 13

Page 2 Installation Instructions

PREMIER MOUNTS

LIMITED LIFETIME WARRANTY

What and Who is Covered by this Lim

ited Warranty and for How Long

Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this
product. The limited warranty is valid only for the original purchaser of the product.

What Premier Mounts Will Do

At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier
Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must
pay any labor costs.

What is Not Covered; Limitations

PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS,
OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION,
MODIFICATION, USE OR MISUSE OF ITS PRODUCTS.

PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS
OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.

What Customers Must Do for Limited Warranty Service

If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within
thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims.
Warranty claims must also include a description of the problem, the purchaser’s name, address, and telephone number. General inquiries
can be addressed to Premier Mounts Customer Service at 1-800-368-9700. Warranty claims will not be accepted over the phone or by
fax.

Premier Mounts
Attn: Warranty Claim
3130 E. Miraloma Avenue
Anaheim, CA 92806

How State Law Applies

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.

RTM-L

Installation Instructions Page 3

Warning Statements

WARNING: PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY

PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS
DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND
IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF
ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER
RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.

W

ARNING

: THE MOUNTING SURFACE MUST BE CAPABLE OF SUPPORTING 160 LBS. IF NOT, THE MOUNTING

SURFACE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURES BY A QUALIFIED
SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE
ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN
DEATH.

W

ARNING: SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS

PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO
PREVENT PERSONAL INJURY.

W

ARNING: PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD

BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ
TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION
INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.

Indicates that the power plug is to be disconnected from the power outlet.

Safety precautions must be taken at all times.

Warning and Caution statements.

A secure structure must support the weight, or load, of the display.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result
in damage to the display and/or damage to the mounting surface.

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure
to do so may result in damage to the display and could increase the risk of fire.

At least two qualified people should perform the installation procedure. Injury and/or damage can result from
dropping or mishandling the display.

Contact Premier Mounts with any technical/ installation questions.

RTM-L

Page 4 Installation Instructions

Parts List

NOTE: This mount is shipped with all installation hardware and components. Make sure that none of

these parts are missing and/ or damaged before beginning installation. If there are parts missing
and/or damaged, please stop and contact Premier Mounts [phone].

Installation Tools

Phillips Head Screw Driver Soft Material/ Blanket Pencil
Tape Measure Thread Depth Indicator (Supplied) Level (Supplied)
5/32" Allen Wrench (Supplied) Level (Supplied)

Rotary Tilt
Mount (Qty 1)

Universal
Mounting Brackets
(Qty 2)

Hand Crank (Qty 1)

M6 Knurl Knob

(Qty 1)

Griplate™ (Qty 8)

Installation Instructions Page 5

RTM-L

(Qty 8)

M6 x 20

(Qty 8)

(Qty 4)

(Qty 8)

(Qty 8)

(Qty 8)

(Qty 8)

M6 x 30

M6 x 45

(Qty 8)

M8 x 25

M8 x 20

(Qty 8)

(Qty 8)

(Qty 8)

(Qty 8)

(Qty 8)

M8 x 35

M8 x 30

(Qty 8)

M8 x 70

M8 x 45

(Qty 8)

M4 x 16

M4 x 25

M5 x 12

M5 x 20

M5 x 25

M5 x 16

M5 x 50

M6 x 16

(Qty 8)

(Qty 8)

Parts List (Cont.)

Page 6 Installation Instructions

RTM-L

Parts List (Cont.)

Nylon spacers and flat washers' actual size

NOTE

: The nylon spacers may be stacked to achieve proper spacing.

1/2" Nylon spacers

(large)

Nylon sleeves

(Qty 8)

(Qty 12)

(Qty 8)

(Qty 8)

(Qty 8)

(Qty 8)

1/4" Nylon spacers

(Small)

(Qty 8)

1/4" Nylon spacers

5/16" Flat washers
(metal)

1" Nylon spacers

9/16" Nylon spacers

(large)

RTM-L

Installation Instructions Page 7

Thread Depth Indicator

1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel

to make sure the inserts measure the same full depth and mark it (Figure 1).

2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied).

3. The screw length must not bypass the marking. Select another screw size (Figure 2 and 3), until you find

one that comes closest to your mark without going past.

4. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw.

Inverted Flat Panel

Display

Marking the Depth

Thread
Depth
Indicator

Threaded Insert

Figure 1

Screw

Thread Depth
Indicator

Marking

Screw

Thread Depth
Indicator

Marking

Figure 2 Figure 3

RTM-L

Page 8 Installation Instructions

NOTE: The installation instructions that are contained in this manual refer only to the RTM-L. The

installation instructions for the various bases that are used with the RTM-L will be included with
those products.

NOTE

: Prior to installing the RTM-L, the mounting configuration must already be assembled (base,

support poles, etc.).

Mount Installation

Set Screws

1. Slide the mounting block
over and down the support
poles.

2. To secure the mounting block to the support
poles, tighten the four set screws (located on
each side of the mounting block), using the
5/32" Allen wrench (supplied).

Mounting
Block

Cradle

Support
Poles

RTM-L

Installation Instructions Page 9

Universal Mounting Bracket Assembly

1. Place the universal bracket bar and the universal brackets on a flat surface.

2. Slide the universal brackets onto the universal bracket bar (as shown below) with the set screws facing
up. At this time, do not tighten the set screws that are located on the universal bracket.

3. Place the display on a soft, flat surface, face-down. Next, place the universal bracket assembly on the
back of the display, with the universal brackets resting directly over the display mounting points.

4. Once the desired position has been determined, place the Griplate™ washers over each mounting point
and secure them using the appropriate hardware (see Page 5).

NOTE

: For the two upper mounting points, the Griplate™ dimples must be facing up. For the two

lower mounting points, the Griplate™ dimples must be facing down.

5. At this time, center the universal bracket bar and tighten the set screws that are located on the universal
brackets.

M4 M5 M6 M8

WARNING: IT WILL TAKE TWO PEOPLE TO COMPLETE THE NEXT INSTALLATION STEP.

Griplate™

Universal
Bracket Bar

Set Screw

Universal Mounting Brackets

Griplate™

Griplate™

Set Screw

RTM-L

Page 10 Installation Instructions

3. Lower the universal bracket bar and display into the
cradle (as to the left).

NOTE

: The circular portion of the universal bracket bar

must rest inside the nylon sleeve. If seated
improperly, the operation of the RTM-L will be
hindered and the nylon sleeve will become
damaged.

4. Insert an M6 knurl knob into the knurl knob mounting
point and tighten.

5. Tighten the two (2) Phillips head screws (located
on the side of the mounting block) once the final
position is attained.

Locking Screws

Knurl Knob Mounting Points (a knurl knob may be
placed in either mounting hole)

Nylon
Sleeve

RTM-L

Installation Instructions Page 11

Display Orientation

The RTM-L will allow the user to adjust the display a full 360°.

W

ARNING: BEFORE ROTATING THE RTM-L, MAKE SURE THAT THE M6 KNURL KNOB IS

SECURELY FASTENED TO THE RTM-L. ALSO, PLEASE MAKE SURE YOU ALLOW
ENOUGH CABLE AND WIRE CLEARANCE FOR FULL ROTATION.

1. To adjust the RTM-L, rotate the
display either clockwise or
counter-clockwise.

2. Tighten the two
Phillips head locking
screws (see Step 5,
Page 10).

Tilt Positioning

The RTM-L has the ability to tilt
35° up.

Rotate the crank handle to tilt
the RTM-L:
Down - Clockwise
Up - Counter-Clockwise

The RTM-L has the ability to tilt 10°
down.

1. Once the position has been locked down, use an Allen wrench to take off the crank handle.

2. Once the crank handle has been removed, re-attach the crank handle, but in the opposite direction from
what it was. This is the storage position for the handle.

RTM-L

Page 12 Installation Instructions

Optional Configurations

Technical Specifications

All measurements are in inches (mm).

PSD-TS

PSD-BW

PSD-EB

Knob

RTM-L Addendum

RTM-L ADDENDUM:

The RTM-L is shipped with the hand crank in the storage position. The hand crank must be removed
in order for the RTM-L to be adjusted. After the adjustments have been made, return the hand crank
to the storage position. If the hand crank is not returned to the storage position, it may cause damage
to the unit or other equipment. Please return the hand crank to the storage position after operation.

Hand Crank
(Qty 1)

Storage Position

Loosen the M8 set screw using the 5/32”
Allen wrench. Remove the hand crank.

5/32” Allen Wrench

5/32”Allen Wrench

(Qty 1)

Hand Crank

Set Screw

Storage Position

Slide the hand crank back onto the RTM-L
and tighten the set screw using the 5/32”
Allen wrench.

Operating Position

Once the hand crank has been removed, turn the hand crank
around so that the hand crank knob is pointing away from the
unit. Place the hand crank back onto the unit and tighten the
set screw with the 5/32” Allen wrench.

Hand Crank

Page – 13 – Installation Instructions

I N S T A L L A T I O N M A N U A L

Step 1

Open the box and remove all components.

Step 2

Slide the shelf over the poles, select the desired
height and lock the height by tightening the four
(4) Allen head screws using the hex key.

PSD-SHB Black Shelf

1

2

Phone: [phone]

www.idt.com.au