Precision power PC.15 User Manual
A
M
P
1 PC Subwoofer Wired to 4Ω 1 PC Subwoofer Wired to 1Ω
A
M
P
2010 Power Class
A
M
P
A
M
P
2 PC Subwoofers Wired to 2Ω
2 PC Subwoofers Wired to .5Ω
Subwoofers
P C . 1 2 P C . 1 5
A
M
P
3 PC Subwoofers Wired to 1.33Ω
WWW.PRECISIONPOWER.COM
WWW.PRECISIONPOWER.COM
Thank you for choosing PrecisionPower
woofers. Designed and
engineered in the USA, this product combines innovative technology with the finest materials to consistently deliver
of the Art
PrecisionPower
™ performance, sound quality, reliability, and value. This
product reflects our commitment to offer you
Absolutely State
unparalleled performance and quality for years of dependable service and listening enjoyment.
Enclosure Dimensions
Included in this manual are a number of different enclosure suggestions. These are by no means the only enclosures to use, but they
provide a starting point to determine the correct enclosure for your
needs many factors must be addressed (amount of power, vehicle,
placement, crossovers, etc) Therefore, as always PrecisionPower
recommends that your subwoofer be installed by an authorized
PrecisionPower dealer.
Features, Parameters, & Dimensions
Non Pressed Paper Pulp Cone
Polyether Foam Surround
2.5” 4-layer VC on Aluminum Former
Nickel Plated 8ga. Compression Terminals
Dual Poly-Cotton Suspension Spiders
series wired PC.12 PC.15
Fs (Hz)
Qms
Vas (ft³)
Cms (mm/N)
Mms (g)
Rms (kg/s)
Xmax (mm)
Xmech (mm)
Piston Diameter (in)
Sd (in²)
Qes
Re (Ω)
Z (Ω)
BL (Tm)
Rms Power (watts)
Qts
NO (%)
1w/1m SPL (dB)
2.8V SPL (dB)
Voice Coil Diameter (in)
Impedance (Ω)
M-vd (ft.
3
)
Die-Cast Aluminum Frame
170oz. Strontium Ferrite Magnet
Vented T-Yoke Back-plate
Cast Aluminum Heat-sink Dust-cap
28.05 29.14
5.028 6.832
1.282 3.17
0.106 0.0977
303.4 305.2
10.63 8.18
15 15
22.5 22.5
9.842 12.6
76.09 124.7
0.406 0.524
3.88 3.85
4 4
22.61 20.27
600 700
0.376 0.487
0.191 0.41
84.8 88.1
88.1 91.45
2.5” 2.5”
DVC 2Ω DVC 2Ω
0.174 0.25
Enclosure Construction
All enclosures should be made of .75” (3/4”) material only. When
possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the
depth of the enclosure to compensate. All volumes INCLUDE vent/
port and subwoofer displacements. DO NOT change the volume
unless you plan on adding a substantial amount of bracing. For
added performance, applying a coat of fiberglass resin to the interior
walls will greatly improve sealing the enclosure. Adding a thin layer
of poly-fill will improve response by smoothing out reflections
within the enclosure.
Enclosure Recommendations
PC.12 Sealed PC.12 Ported
Dimensions
Vol.
3
(H x L x D)
(ft.
)
0.75 13.5x13.5x10.5 0.649 55.4 1.75 4” x 12” 39.5 33.3
1.00 13.5x17.5x10.5 0.580 56.9 2.25 4” x 12” 33.9 29.0
1.25 13.5x21.5x1
0.5 0.539 58.3 2.75 4" x 12" 30.3 26.3
QTC
-3dB
(Hz)
PC.15 Sealed PC.15 Ported
Vol.
Dimensions
3
(ft.
)
(H x L x D)
1.50 17x16x13 54.9 45.0 3.50 (2) 4" x 12" 37.7 31.3
2.00 17x21x13 55 43.2 4.00 (2) 4" x 12" 34.9 29.1
2.50 17x25.75x13 55 42.8 4.50 (2) 4" x 12" 32.8 27.4
QTC
-3dB
(Hz)
Dimensions
Vol.
(H x L x D)
(ft.3)
14x17.25x16.75
14x22x16.75
14x26.5x16.75
Dimensions
Vol.
(H x L x D)
(ft.3)
16x26.75x18
16x30.5x18
16x34x18
Port
(dia. X L)
Freq.
(Hz)
-3dB
(Hz)
Port
(dia. X L)
Freq.
(Hz)
-3dB
(Hz)
WWW.PRECISIONPOWER.COM
WWW.PRECISIONPOWER.COM
Loading...