HPS126-HPS67
Horizontal Panel Scoring Saw
Cut it right the first time, Powermatic now has the long and short of it! The New HPS126
and HPS67 Horizontal Sliding Table Panel Scoring Saws.
The Gold Standard Since 1921.
HPS126-HPS67 Horizontal Panel Scoring Saw
Whether you need a full 10.5' cut on
long panels, or you have space constraints
yet still need the features of a big saw,
Powermatic has the right saw for you.
Both of these machines feature a generous
size sliding carriage assembly that travels
effor tlessly on precision ball bearings
guided by hardened and ground s u p port
rods. Heavy walled extrusions on both
the slider and support beam eliminate
distortion and twist found on some
machines. All carriage parts are har d
anodized to prevent marring of the
workpiece and insuring the life of the
■
parts.
are full seam welded to provide a strong
platform and base leveling screws assure
an accurate installation. Crosscut tables
are box-welded components and cross
braces that are full seam welded to
prevent distortion, even with the heaviest
loads. A two position cross cut fence with
extension and dual flip stops make short
work of big jobs quickly and accurately.
The main table of cast iron s upport s t h e
rugged rip fence, which locks on a solid
steel guide bar. The rip fence features a
dual position fence body and has a micro-
adjust for precise cuts.
unit consists of massive steel plate that
carries the main and scoring motors.
All rise/fall and tilting controls are fully
enclosed to pr event dust contamination.
Blades and riving knives are shrouded
under the table and have dust collection
and blade brushes to minimize nuisance
dust.
collection ports, Overarm blade guards
with dust collection, Full size miter gage
with fence, extension, stock clamp and
flip stop. Auxiliary pan e l s u p p o rts, Rear
out-feed extension table, Right side
extension table. Self-braking motors,
Independent external scoring adjustment
with separate switch. All this and a host
of other features are included.
and sh ort of it is: if you are working sheet
goods, Powermatic has the saw for you.
Saw bodies of heavy steel plate
■
The main saw
■
Other features include: Dual dust
■
■
■
The long
HPS126 HORIZONTAL PANEL SCORING SAW
FEATURE
Saw body constructed of heavy
steel plate and full seam welded
Heavy walled extra-wide carriage
assembly travels on ball bearings
and hardened steel ways
1
/2HP main and 3/4HP scoring
7
motors mounted on massive
steel plate
BENEFIT
Basis for a rock solid platform and
insures accuracy of machine
Eliminates distortion of carriage under
load and glides effortlessly through
the cut
Assures constant alignment with no
deflection for excellent cutting results
Auxiliary stock rollers on crosscut
carriage and ripping position
Extra long dual position crosscut
Ease of handling large workpieces
Accurate crosscuts in any position
and ease of handling
Auxiliary long stock squaring
attachment travels on rail
Swing away guard with 4-inch
dust port
Both blades shrouded and
Includes blade brushes
Easy access controls
Large sliding table with
heavy duty panel carriage
has a 47" miter fence
with flip stop and clamp.
Crosscut fence has dual
stops with magnifying
cursor.
Control console with
Star/Delta motor starter,
Independent scoring
control and lighted blade
speed indicator are
easily accessed from
the operator position.
Allows user to square long work while
using carriage
Fast tooling changes and a clean
work environment
Exceptional dust collection with
minimized noise
Fast set-ups for blade adjustments
Main blade raising/
lowering controls,
Scoring blade height/
lateral controls, Dual
position rip fence with
Micrometer adjustment.
The Gold Standard Since 1921.
HPS67 HORIZONTAL PANEL SCORING SAW
FEATURE
Ball bearing support arm travels
with carriage
13
/16" dado capacity
Heavy frame anodized carriage
assembly with precision bearings
Self-braking 5HP motor with
3
/4Hp scoring motor
Micrometer adjustable dual
position rip fence
Swing-away overarm guard
with dust collection port
External scoring unit adjustments
Rugged two position crosscut
fence with dual flip stops
BENEFIT
Maximum support and a precise cut
even with heavy panels
Not found on other saws in this class
Full support of panels without distortion
for trouble free cuts
Provides maximum power to the saw
blade for production cutting
Fast precise set-up for any size stock
Clean work environment and allows for
fast blade changing
Quick set-up and precise alignment
Choice of cutting configuration and fast,
repeatable panel options
Heavy duty carriage
assembly with support
arm and two position
crosscut fence with panel
support, swing away
overarm guard.
31" miter fence with stop
and stock clamp, wide
saw carriage for support,
sliding table lock and saw
arbor raising mechanism.
Dual position rip fence
with micro adjust travels
on solid steel guide bar,
Main saw arbor raising,
scoring height and lateral
adjustments are easily
accessed from front of
machine.
HPS126 HORIZONTAL PANEL SCORING SAW
• Dual position crosscut fence with flip stops and cursor
• All ball bearing carriage support arm
• Long 10.5' stroke
• Swing-away saw guard with dust collection
• Micro-adjust rip fence
• Extra-wide sliding carriage
• Control panel for blade speed, scoring and main motor
• Stock support with long panel squaring gauge
• Heavy welded steel frame for exceptional rigidity
HPS67 HORIZONTAL PANEL SCORING SAW
• 2-position crosscut fence with dual flip stops
• Heavy duty crosscut table
• All ball bearing carriage support arm
• Miter fence with stop and stock clamp
• Swing-away overarm guard
• Dual position rip fence with micro-adjust
• Extra-wide sliding table
• Heavy duty seam welded machine body
13
/16" dado capacity
•
HPS126 Horizontal Panel Saw
Model Number HPS126
Stock Number 1791288K
Main Motor HP/Voltage/Phase 7.5HP 230V 3PH
Blade Speed 3/4/5,000 rpm
Blade Size 12-16"(300-400 mm)
Arbor Size 30 mm
Cutting Depth 5"(125 mm)
Scoring Motor HP .75HP
Scoring Blade Size 100 to 120 mm
Scoring Blade Arbor 20 mm
Scoring Blade Speed 7,000 rpm
1
Sliding Table Carriage Width 16
Sliding Table Carriage Stroke 126" (3,200 mm)
Rip Capacity 54" (1,380 mm)
Main and Scoring Blade Tilt 90 to 45 degrees
Main Table Size Cast Iron 27
Right Side Extension Table 31" x 18
Rear Extension Table Size 28" x 25
Working Table Height 34" (860 mm)
Crosscut Table Size 57" x 21
Crosscut Fence Size with Extension 117" (2,970 mm)
Miter Fence with Flip Stop, Clamp 47" (1,200 mm)
Overall Size 140" x 54" x 126
Dust Collection Port(s) 2 3"and 4" (100 mm)
Weight Gross 2,640 lbs (1,200 kg)
Weight Net 2,530 lbs (1,150 kg)
PN Accy. Scoring Blade 120 x 20 mm x 24T 6080154
PN Accy. Main Blade 400 x 30 mm x 72T 6080155
"
/2
(420 mm)
1
"
"
/2
x 35
(700 x 890 mm)
"
(790 x 460 mm)
"
(710 x 635 mm)
"
(1,450 x 530 mm)
"
(3,555 x 1,370
x 3,200 mm)
Includes the Following:
• Overarm Guard with
Dust Port
• Rip Fence
• Miter Fence with
Clamp, Flip Stop
• Tool Set
• Crosscut Fence with
2 Flip Stops
• Externally Adjustable
Scoring
• Stock Hold Down
• Long Ripping Guide
with Scale
• Adjustable Panel
Support
HPS67 Horizontal Panel Saw
Model Number HPS67
Stock Number (5HP 230V 3Ph) 1791287
Stock Number (3HP 230V 1Ph) 1791286
Blade Speed 4,500 rpm
Blade Size 12"(315 mm)
Arbor Size 30 mm
Dado Size (Width) + (Bore)
Cutting Depth 4"(100 mm)
Scoring Motor HP .75HP
Scoring Blade Size 100 to 120 mm
Scoring Blade Arbor 20 mm
Scoring Blade Speed 6,500 rpm
Sliding Table Carriage Width 13" (330 mm)
Sliding Table Carriage Stroke 67" (1,700 mm)
Rip Capacity 50" (1,270 mm)
Main and Scoring Blade Tilt 90 to 45 degrees
Main Table Size Cast Iron 37" x 20" (940 x 508 mm)
Right Side Extension Table 31" x 18" (790 x 460 mm)
Rear Extension Table Size 30" x 20" (760 x 500 mm)
Working Table Height 34" (860 mm)
Crosscut Table Size 42" x 20
Crosscut Fence Size with Extension 101" (2,565 mm)
Miter Fence with Flip Stop, Clamp 31" (790 mm)
Overall Size 122" x 54" x 93
Dust Collection Port(s) 2 2"and 4" (100 mm)
Weight Gross 1,100 lbs (500 kg)
Weight Net 902 lbs (410 kg)
PN Accy. Scoring Blade 120 x 20 mm x 24T 6080152
PN Accy. Main Blade 305 x 30 mm x 72T 6080153
13
(1,060 x 510 mm)
/16
" +
5
"
/8
"
"
Includes the Following:
• Overarm Guard with
Dust Port
• Rip Fence
• Miter Fence w/Clamp,
• Flip Stop
• Tool Set
• Crosscut Fence with
2 Flip Stops
• Externally Adjustable
Scoring
WMH TOOL GROUP
Industrial Woodworking Machinery Division
427 Sanford Road
LaVergne, TN 37086
1-800-248-0144
www.powermatic.com
Part No. 91-609
The Gold Standard Since 1921.
Loading...