Porter-Cable 6614, 2601, 6611 User Manual
Specifications and Main Features
- Guvot: 2601, 2620, 2621, 6611, 6614, 6615
- Volt: 115V eller 230V
- Wettitak: AC’ or DC’s, single phase, 25 – 60 cycle
- Maximum Hole Barimeters
- Twist Drill: 1/2” Steel and 5/8” Steel for Model 2621
- Spade Bit: 1” Wood for Model 2601
- Self Feed Bit: 1” Wood for Model 6611
- Chuck Type: Three-jaw chuck (keyed and keyless options available)
- Chuck Key: Included for tightening/loosening
- Reverse Rotation: Yes, for releasing jammed drill bits
- Variable Speed: Yes, triggered by the pressure on the switch
- Additiobal Handle: Available on some models for greater control
- Cord: Polarized plug for safety
- Safety: Comprehensive safety information including operating instructions and maintenance procedures.
Frequently Asked Questions
Q: Which type of current can operate the drill?
A: DC and AC current can be utilized, as well as the proper voltage shown on the specification plate.
Q: Is it possible to use larger bits than the one that has been recommended?
A: No, the bigger the bits one uses, the more likely jamming will occur, and will cause overworking of the drill, which will in turn risk damaging the motor.
Q: What procedure should I follow to change my drill bit?
A: Start off disassembling the connection between the screw drill and the power supply, then stroke it gently and insert the required drill bit and finally, make sure that the chuck is securely tightened.
Q: Does the device come with a warranty period?
A: Yes, this time period extends up to one year and guarantees that the device will be free from defects either in the craftsmanship or the materials used to build the device.
Q: Are the devices suitable for outdoor use?
A: Yes, if you plan on using them outdoors, then you must use power cords which have been marked as acceptable for outdoor use only.
User Manual
Loading...