PolyScience DuraChill 2 to 3 HP Data sheet

Portable Chillers — DuraChill™ – 2 to 3 HP

Key Speciﬁcations

Working Temperature: +5° to 35°C

Temperature Stability: ±0.5°C

Cooling Capacity: Up to 10,936 W @ 20°C

Reservoir Capacity: 7 gallons/26.5 liters

Overall Dimensions 30.5 x 37 x 42" (L x W x H): 78 x 94 x 107 cm

Features:

• High capacity cooling for lasers, EDM equipment, injection molding, and other heat removal applications

• Displays temperature and pressure or ﬂow rate simultaneously

• User-adjustable temperature, pressure, and ﬂow rate alarms

• Easy to operate and maintain

Air Cooled

2.0 HP

Temperature Range 41° to 95°F/5° to 35°C

Temperature Stability ±0.9°F/±0.5°C

Power Requirements (VAC/Hz/PH)

Cooling Capacity

Standard Pump 1/3 HP Centrifugal

Maximum Pressure psi (bar) 20.5 (1.41) 17.1 (1.2) 20.5 (1.41) 17.1 (1.2) 20.5 (1.41) 17.1 (1.2)

Maximum Flow gpm (l/min) 12 (45.1) 10 (37.6) 12 (45.1) 10 (37.6) 12 (45.1) 10 (37.6)

1. 230/60/1, 460/60/3, 240/50/1, and 380/50/3 also available.

2. Cooling capacity based on 20°C/68°F entering air and 20°C/68°F leaving water. Allowance made for heat gain from pump.

DuraChill™ Chillers are available with a wide selection of factory installed options. Contact us for help in selecting the chiller size and conﬁguration that best meets your heat removal requirements. See pages 109 through 112 for DuraChill™ options and accessories.

@ 20°C (W/BTU) 7,000/

240/60/3 220/50/3 240/60/3 220/50/3 240/60/3 220/50/3

23,870

6,160/

21,006

10,500/

35,805

Air Cooled

3.0 HP

9,240/ 31,508

10, 936/

37, 2 9 2

Water Cooled

3.0 HP

9,624/ 32,817

www.polyscience.com |www.polyscience.com |

105