Polaroid SB-502 User Manual

User Manual

SB-502

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE

OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR

FUTURE REFERENCE.

1

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions carefully.

2. Keep these instructions in a safe place and follow all
instructions.

3. Do not use this product near water. This product shall not
be exposed to dripping, splashing of water or places with
extreme humidity.

4. Cleaning: Do not use liquid cleaners or aerosol cleaners.
Clean only with a dry cloth.

5. Do not place near any heat sources such as radiators, heat
registers, stoves, or other apparatuses (including amplifiers)
that produce heat.

6. Only use attachments/accessories specified by the
manufacturer.

7. Refer all servicing to qualified service personnel.

8. Prevent this device from falling or impact during use.

9. Do not place other objects on the LCD screen.

2

FCC Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interfer ence
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not

expressly approved by the party.
Responsible for compliance could void the user’s authority to operate

this equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including

interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure

requiremen

3

IC Warning

This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference,

and (2) this device
must accept any interference, including interference that may
cause

undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may
only operate using an

antenna of a type and maximum (or lesser)

gain approved for the transmitter by Industry

Canada. To reduce
potential radio interference to other users, the antenna type and
its

gain should be so chosen that the equivalent isotopically

radiated power (e.i.r.p.) is not

more than that necessary for

successful communication.
This device complies with Canadian ICES-003 and RSS-210

Thank you for your purchase.

SMARTWATCH OVERVIEW