Polaroid PBE111, PBE112, PBE113 User Manual

*The picture is only provided for reference. Please refer to the actual unit!

GETTING STARTED

Please read this user’s manual carefully before using the product to make a correct use of all

functions and know well about the system connection and usage. Please keep this manual in a

safe place for future reference.

INTRODUCTION

This Bluetooth® earbuds will allow you to listen to your music wirelessly from your mobile phone,

tablet or other Bluetooth® enabled device. It delivers powerful and clear sound. The built-in

microphone will allow you to answer calls from mobile phone.

WARNING

Prolonged use of headphones at high volume may cause irreparable hearing loss. We strongly

advise you to adjust your listening volume to a reasonable level. The higher the volume, the

more you risk damaging your hearing quickly.

We also recommend you to use your headphones responsibly! It is dangerous or even illegal in

some areas, to use earphones in situations that require your full attention, such as driving a car,

motorcycle or bicycle, but also as a pedestrian when crossing the street, etc.

PRECAUTIONS

First thank you for buying XKDUN Bluetooth® earbuds. Please refer to this Users’ Manual before
use to use it properly. The contents stated herein may be modified from time to time for better
service as the product properties and functions are changed without prior notice. For the sound

performances of the product, never use it in too cold, too hot, too dusty or humid places,
especially:

Moist or underwater conditions

Near the heater or hi-temperature services or solarization

Places apt to fall

Never disassemble the combination audio; otherwise, it may invalidate the warranty.

Buttons description

1: “V+” button: Short press to increase volume; Long press for Next track

2: Multi-function button (MFB): Power on/power off/answer a call/end a call/reject a call/

pause/play music

3: “V-” button: Short press to decrease volume; Long press for Previous Track

4: LED indicator

5: Micro USB charging port

6. Built-in microphone

FUNCTION OF LED INDICATOR

A. When charging

RED LED is on when the battery is charging.

RED LED is off when battery is fully charged.

B. When usingthe earphone

RED and BLUE LED blink alternately when the headphone is in pairing mode.

Stand By mode: the LED rapidly flashes BLUE.

Music playback mode: LED flashes slowly in BLUE.

RED LED blinks with sound alert when the battery has low power.

CHARGING BATTERY

The headset comes with a built in rechargeable battery. Before using it for the first time we

recommend you charge the battery fully. Only use the supplied micro USB cable to charge the

headset. Please charge for 3 hours.

Connect the micro USB connector of the charging cable into the micro USB port on the side of the

headphone. Connect the other end of the USB cable to your computer’s USB port or to an

optional USB wall charger (not included)

The RED LED indicator light is illuminated.
The RED LED indicator light shuts off when the speaker is fully charged.

SWITCHING ON / OFF

Switch ON: Press and hold the MFB for about 5 seconds, until the LED flashes BLUE. You will hear

a vocal message « Power ON » in the earphone.

Switch OFF: Press and hold the MFB for about 3 seconds, until the LED flashes RED. You will hear

a vocal message « Power OFF » in the earphone.

PAIRING INSTRUCTIONS

You need to pair the headphone with your Bluetooth® enabled device (smartphone, tablet, mp3

player, computer, etc.) before enjoying the music wirelessly with the earphone.

Enter in pairingmode

Be sure that the earphone is in power off status first, press and hold the MFB for about 7 to 8

seconds, until red and blue led blink alternately. Then release the MFB button, the unit is now in

paring mode. The headphones emit the voice message "pairing".

Pairingthe earphones with Bluetooth® devices

Make the headphones enter into pairing mode (please refer to above section)

Place the Bluetooth® headphone and Bluetooth® device (phone, tablet, music device) at 1 meter

from each other.

Activate the Bluetooth® function on your Bluetooth® device. Please refer to the manufacturer’s

manual for instructions on enabling Bluetooth® on your device.
After searched, select”PBE111/2/3” in the device list on the Bluetooth® device.

If a password is asked, enter the “0000” and press”connect” (only some Bluetooth® devices will

ask for a password)

When the connection is successful, the voice message "connected" is heard from headphones

and BLUE LED will quickly flash a few times when pairing is successful.

Please note pairing mode on the headphone will last for around 3 minutes. If no devices are

paired within around 3 minutes the headphone will automatically return to standby mode.

If pairing is unsuccessful, turn off the headphone first and then re-pair again following the above

steps.

Re-connectingto Bluetooth® devices

Every time the headphone is switched on, it will connect to the nearest and the last connected

device automatically .

When the headphone is in standby mode and doesn’t connect to any device, short press the MFB

button and it will connect to last connected device automatically.

Note: Headphones can be paired with two devices simultaneously.

LISTEN TO MUSIC

When the headphone is correctly paired with your Bluetooth® device, simply start to play music

on your device and you can enjoy the sound wirelessly in your headphone.

Volume up in music mode: Short press on volume”+” key. You will hear a beep tone when the

maximum volume level is reached.

Volume down in music mode: Short press on volume”-” key. You will hear a beep tone when the

minimum volume level is reached.