Polaroid P75I User Manual
Cleaning
A Cleaning Kit is provided with your Polaroid Card Printer. This kit contains
five Pre-Saturated Cleaning Cards and one Swab.
Refer to the User’s Manual for Cleaning Procedures.
Re-packaging the printer
It is very important that all packing material is safely kept in case you need to
move or re-ship the printer. Be sure the complete packing material is stored in
a dust free environment.
Remove Card Cartridge (For Polaroid P75i only), Card Output Hopper and Card
Cleaning Cartridge prior to packaging the printer for shipment and place them
back in the dedicated plastic bags and areas in the printer accessories box.
Contact your Polaroid dealer or distributor should you need a new Packaging Kit.
Maintenance
While operating your Polaroid Card Printer it is very important to maintain it
properly according to the instructions provided in the Printer User’s Manual.
If you have any difficulty with your new Polaroid Card Printer and have not been
able to find a solution in the User’s Manual, please contact your dealer or visit
www.Polaroid-ID.com
us at
Thank you for choosing the Polaroid Card Printer!
GETTING ST
GETTING ST
Before starting to work with your new Polaroid Card
Printer, please refer to the following quick instructions.
For more complete information regarding all aspects of
your printer’s operation, please refer to the Printer User’s
Manual.
ARTED!
ARTED!
Setup
1. Unpack your Polaroid Card Printer
After unpacking your Polaroid Card Printer, make sure the following items are
included:
For both Polaroid P75i & P100i
c Software Pack c Quick Start Guide c Card Cleaning Cartridge
c Power Cord c Cleaning Kit c Card Output Hopper
c Interface Cable
Plus for Polaroid P75i
c Card Cartridge
2004, Polaroid Corporation
©
P/N:980306-003
If any items are missing, please contact you dealer.
2. Install Card Cartridge
For Polaroid P75i only
The Card Cartridge is packed separately from the printer in a protective plastic
bag. Install Card Cartridge by hooking onto printer as shown and clicking down.
3. Install Card Cleaning Cartridge
2. Loading Cards
For both Polaroid P75i & P100i
The Card Cleaning Cartridge is packed separately from the printer in a protective
plastic bag. Carefully peel the wrapper off the Cleaning Roller before installing
the Cartridge.
4. Install Card Output Hopper
For Polaroid P75i & P100i
This item is delivered separately from the printer in a protective plastic bag.
For Polaroid P75i
Step 1
Step 2
Step 3
For Polaroid P100i
Step 1
New cards in the packaging usually have a high electrostatic charge. This
electrostatic charge can be reduced by shuffling the stack of cards. Do not bend
the cards or touch the print surfaces of cards as this can reduce print quality!
Step 2
Step 3
Media
1. Loading Ribbon
For both Polaroid P75i & P100i
Ribbon loading involves the placement of the ribbon into the Supply and TakeUp spindles.
locked down, the spindles will automatically rotate to take up any slack and to
synchronize the ribbon to the correct panel.
As soon as the ribbon is installed and the Print Head assembly is
SUPPLY SPINDLE
TAKE-UP SPINDLE
3. Set Card Thickness Control Lever
For Polaroid P100i
This item can be operated by the user to set the card thickness and to prevent
more than one card feeding into the printer at the same time. Simply move the
lever to adjust to the correct card thickness.
For Polaroid P75i
Loading...