Plantronics CS70N, CS60 User Manual

Communication Products (Pty) Ltd
)
d hold th
Email: orders@headsetsolutions.co.za
Sole Authorized Importer & Distributor of Plantronics Products since 1990
Pairing Instructions
CS60
If the red light on the base unit is flashing your headset is not paired with the base, in order to pair the headset with base follow the instructions below:
Both the headset and base need to be in pairing mode simultaneously in order for the units to ‘find’ each other. Setting the base into pairing mode:
1) 2
Press an The base is now in pairing mode
3)
Setting the headset into pairing mode:
Ensure that the headset is fully charged
1)
Put headset into charging base
2)
Press and hold the mute/volume button until green indicator on headset flashes quickly
3)
Pairing is successful if “Red” power light turns solid and the green light on the headset will stop flashing
If the red light on the base unit is flashing your headset is not paired with the base, in order to pair the headset with base follow the instructions below:
Both the headset and base need to be in pairing mode simultaneously in order for the units to ‘find’ each other. Setting the base into pairing mode:
Ensure that the base in plugged in correctly and the red power light is on and flashing
1)
Press and hold the +and - buttons at the back if the base unit until the light on the top of the base flashes green
2)
The base is now in pairing mode
3)
Setting the headset into pairing mode:
Ensure that the headset is fully charged
1)
Put headset into charging base
2)
Press and hold the volume + and answer button simultaneously until orange light stays on constantly
3)
Pairing is successful if “Red” power light stops flashing and orange light turns off.
e + and - buttons at the back if the base unit until the light at the top of the base flashes green
CS70N
Tel: (021) 840 2200
Fax: (021) 840 2251
www.plantronics.co.za
Loading...