PLANET WL-LTNA User Manual

Lightning Arrester
Antenna
WL-LTNA
N-Type C able
Ground
Antenna
WL-LTNA
N-Type C able
Ground
Antenna
WL-LTNA
N-Type C able
Ground
Antenna
WL-LTNA
N-Type C able
Ground
Antenna
WL-LTNA
N-Type C able
Ground
Antenna
WL-LTNA
N-Type C able
Ground
Antenna
WL-LTNA
N-Type C able
Ground
Antenna
WL-LTNA
N-Type C able
Ground
Lightning Arrester
Lightning Arrester
Lightning Arrester
EM-WL-LTNAv1
WL-LTNA
INSTALLATION GUIDE
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
Lightning Arrester
WL-LTNA
INSTALLATION GUIDE
EM-WL-LTNAv1
WL-LTNA
INSTALLATION GUIDE
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
Lightning Arrester
WL-LTNA
INSTALLATION GUIDE
EM-WL-LTNAv1
WL-LTNA
INSTALLATION GUIDE
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
Lightning Arrester
WL-LTNA
INSTALLATION GUIDE
WL-LTNA
INSTALLATION GUIDE
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
EM-WL-LTNAv1
Lightning Arrester
WL-LTNA
INSTALLATION GUIDE
EM-WL-LTNAv1
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
EM-WL-LTNAv1
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
EM-WL-LTNAv1
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
Step 1: Connect your
external Antenna to WL-LTNA.
Step 2: Connect your N-type
cable to WL-LTNA.
Step 3: In the left side, you
can see a screw, please use a low impedance ground cable to connect the screw and ground.
EM-WL-LTNAv1
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
Warning:
1. Please look over the site before beginning any installation, and anticipate possible hazards.
2. Try to keep the antenna connection leave the power line away. People may be injured or killed if they are touching or holding any part of equipment when it contacts power lines.
3. Make sure all towers and masts are securely grounded, and electrical cables connected to antennas have grounded lightning arrestors.
4. Do not connect when a storm is near or when transmissions are occurring.
Specication:
Type: Gas Discharged Frequency: 0~6GHz Gain Loss: Less then 0.5dB Maximum withstand current: 20KA Connector Type: N male to N female
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-22199518 Fax: 886-2-22199528 http://www.planet.com.tw
Loading...