Pioneer XW-NAV1-K User Manual

XW-NAV1

-K

XW-NAV1K

DVD Speaker system for iPod

Sistema de Bocina para Ipod con lector DVD

Register your product at:

http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)

• Protect your new investment

The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.

• Receive free tips, updates and service bulletins on your new product

• Improve product development

Your input helps us continue to design products that meet your needs.

• Receive a free Pioneer newsletter

Registered customers can opt in to receive a monthly newsletter.

http://www.pioneerelectronics.com (États-Unis)
http://www.pioneerelectronics.ca (Canada)

-K

Operating Instructions

Manual de instrucciones

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

This Class B digital apparatus complies with
Canadian ICES-003.

D8-10-1-3_A1_En

Information to User

Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.

D8-10-2_A1_En

CAUTION

This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic
interference with electric appliances such as radios
and televisions, use shielded cables and connectors
for connections.

D8-10-3a_A1_En

WARNING: Handling the cord on this product or

cords associated with accessories sold with the
product may expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.

Wash hands after handling.

D36-P5_B1_En

WARNING

This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.

D3-4-2-1-3_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

WARNING

Before plugging in for the first time, read the following
section carefully.

The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the bottom panel.

D3-4-2-1-4*_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 10 cm at top, 10 cm at rear, and 10 cm at each
side).

WARNING

Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.

D3-4-2-1-7b*_A1_En

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)

D3-4-2-1-7c*_A1_En

IMPORTANT NOTICE

THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SAFE PLACE FOR FUTURE
REFERENCE.

D36-AP9-1_A1_En

IMPORTANT

RISK OF ELECTRIC SHOCK

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.

CAUTION

This product is a class 1 laser product classified under
the Safety of laser products, IEC 60825-1:2007.

Read these instructions.

1)
Keep these instructions.

2)
Heed all warnings.

3)
Follow all instructions.

4)
Do not use this apparatus near water.

5)
Clean only with dry cloth.

6)
Do not block any ventilation openings. Install in

7)
accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as

8)
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the polarized

9)
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or

10)
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

CAUTION

DO NOT OPEN

11)

12)

13)

14)

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

D3-4-2-1-1_A1_En

CLASS 1 LASER PRODUCT

D58-5-2-2a_A1_En

Only use attachments/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

D3-7-13-69_En

CAUTION

STANDBY/ON switch on this unit will not

The
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).

D3-4-2-2-2a*_A1_En

If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
vacation).

D3-4-2-2-1a_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.

S002*_A1_En

When using this product, confirm the safety
information shown on the bottom of the unit.

D3-4-2-2-4_B1_En

WARNING

Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.

This product contains mercury. Disposal of this
material may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local authorities or
the Electronics Industries Alliance : www.eiae.org.

K057_A1_En

This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.

K041_A1_En

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a
safe level – a level that lets the sound come through
clearly without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of sound, so
what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by setting
your equipment at a safe level BEFORE your hearing
adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.

• Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.

• Once you have established a comfortable sound
level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:

• Do not turn up the volume so high that you can’t
hear what’s around you.

• Use caution or temporarily discontinue use in
potentially hazardous situations.

• Do not use headphones while operating a motorized
vehicle; the use of headphones may create a traffic
hazard and is illegal in many areas.

S001a_A1_En

Thank you for buying this Pioneer product.

Please read through these operating instructions so tha t you will know how to operate your model
properly. After you have finished reading the instructions, put them in a safe place for future
reference.

Contents

English

01 Before you start

What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . 6

Loading the batteries in the remote control . . .6

Using the remote control . . . . . . . . . . . . . . . .7

02 Connections

Connecting using an audio/video cable . . . . . .8

Connecting using an HDMI cable . . . . . . . . . . 8

Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . .9

Connecting to an AV receiver or amplifier . . . .9

Audio signals that can be output from this

unit’s HDMI OUT terminal . . . . . . . . . . . . . . .10

Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

03 Controls and displays

Remote control . . . . . . . . . . . . . . . . . . . . . . . .11

Front/top panel . . . . . . . . . . . . . . . . . . . . . . . . . 14

04 iPod/iPhone playback

Confirm what iPod/iPhone models are

supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Connecting your iPod/iPhone . . . . . . . . . . . . . 16

Connecting your TV . . . . . . . . . . . . . . . . . . . . 16

Playing your iPod/iPhone. . . . . . . . . . . . . . . . .17

05 Disc playback

Playing discs or files . . . . . . . . . . . . . . . . . . . . 18

Eject a disc from this unit . . . . . . . . . . . . . .18

Example of display on the front panel display

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Playing in the desired order (Programmed Play)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

06 USB playback

Playing files stored on USB devices . . . . . . . .20

Recording audio CD tracks on USB devices

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Recording all the tracks . . . . . . . . . . . . . . . .21

Selecting the track(s) to be recorded . . . . . 21

Playing in the desired order

(Programmed Play) . . . . . . . . . . . . . . . . . . . . .21

07 Using the tuner

Connect the FM antenna . . . . . . . . . . . . . . . . .22

Listening to the FM radio . . . . . . . . . . . . . . . . .22

Memorizing stations . . . . . . . . . . . . . . . . . . .22

Listening to station presets. . . . . . . . . . . . . . . 22

08 Other connections

Connecting auxiliary components . . . . . . . . . 23

09 Changing the settings

Audio Settings parameters . . . . . . . . . . . . . . . 24

About Sound Retriever function . . . . . . . . . 24

Video Adjust parameters. . . . . . . . . . . . . . . . . 25

Initial Settings parameters . . . . . . . . . . . . . . . 26

Digital Audio Out settings . . . . . . . . . . . . . . 26

Video Output settings . . . . . . . . . . . . . . . . . . 26

Language settings . . . . . . . . . . . . . . . . . . . . 26

Display settings. . . . . . . . . . . . . . . . . . . . . . . 27

Options settings . . . . . . . . . . . . . . . . . . . . . . 27

Setting the HDMI Resolution settings back

to their defaults . . . . . . . . . . . . . . . . . . . . . . . . 27

Restoring all the settings to the defaults. . . . 27

10 Sound settings

Using the Virtual Surround . . . . . . . . . . . . . . 28

Adjusting the bass and treble. . . . . . . . . . . . . 28

11 Using the timer

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . 29

Setting the wake-up timer. . . . . . . . . . . . . . . . 29

Turning the wake-up timer on/off . . . . . . . . 30

Using the wake-up timer . . . . . . . . . . . . . . . 30

Using the sleep timer . . . . . . . . . . . . . . . . . . . 30

12 Playable discs and files on discs or
USB storage devices

Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . 31

Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . 32

13 Additional information

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 35

Language Code Table and Country/Area

Code Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Language Code Table . . . . . . . . . . . . . . . . . . 39

Country/Area Code Table . . . . . . . . . . . . . . . 39

Setting the TV system . . . . . . . . . . . . . . . . . . . 40

Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . 40

Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . 42

About iPod/iPhone . . . . . . . . . . . . . . . . . . . . . 43

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 43

Français Español

En

5

Before you start01

1

2

Chapter 1:

Before you start

What’s in the box

Please confirm that the following accessories
are in the box when you open it.

•Remote Control

•Audio/Video cable

•Power cord

•FM wire antenna

• AA batteries (R6) x 2

• Operating instructions (this document)

Loading the batteries in the
remote control

1 Slide the rear lid in the direction.

Slide in the direction of the arrow ().

2 Open the rear lid.

3 Insert the batteries as shown on the
diagram below.

4

Close

the rear lid.

Caution

• Do not use any batteries other than the
ones specified. Also, do not use a new
battery together with an old one.

• When loading the batteries into the remote
control, set them in the proper direction, as
indicated by the polarity marks ( and ).

• Do not heat batteries, disassemble them,
or throw them into flames or water.

• Batteries may have different voltages, even
if they are the same size and shape. Do not
use different types of batteries together.

• To prevent leakage of battery fluid, remove
the batteries if you do not plan to use the
remote control for a long period of time (1
month or more). If the fluid should leak,
wipe it carefully off the inside of the case,

6

En

Before you start 01

30°

30°

7 m (23 ft.)

then insert new batteries. If a battery
should leak and the fluid should get on
your skin, flush it off with large quantities of
water.

• When disposing of used batteries, please
comply with governmental regulations or
environmental public institution’s rules
that apply in your country/area.

• WARNING
Do not use or store batteries in direct
sunlight or other excessively hot place,
such as inside a car or near a heater. This
can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the
life or performance of batteries.

“Perchlorate Material – special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California, U.S.A.) ”

Using the remote control

The remote has a range of about 7 m at an
angle of about 30º from the remote sensor.

• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the unit’s remote sensor.

• Remote controllers for different devices
can interfere with each other. Avoid using
remotes for other equipment located close
to this unit.

• Replace the batteries when you notice a
fall off in the operating range of the remote.

English

Français Español

Keep in mind the following when using the
remote control:

• Make sure that there are no obstacles
between the remote and the remote sensor
on the unit.

7

En

Connections02

To audio/video
input terminals

Audio/Video cable
(include)

TV

R

W

Y

Chapter 2:

Connections

• Be sure to turn off the power and unplug
the power cord from the power outlet
whenever making or changing
connections.

• Connect the power cord after all the
connections between devices have been
completed.

Connecting using an audio/video
cable

This unit’s rear panel

Connecting using an HDMI cable

By using an HDMI cable, digital signals can be
transferred to an HDMI-compatible TV on a
single cable with no loss of picture or sound
quality. After connecting, make this unit’s
resolution and HDMI color settings according
to the HDMI-compatible TV. Also refer to the
HDMI-compatible TV’s operating instructions.

• HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other
countries.

8

En

Note

• When playing a disc or USB storage device
content, this unit can transfer digital
signals by the HDMI OUT terminal. When
playing the other contents, use the audio/
video cable.

• This unit’s interface is designed based on
the High-Definition Multimedia Interface
specification.

• When an HDMI-compatible device is
connected, the resolution is displayed on
the front panel display.

• The resolution of the video signals output
from this unit’s HDMI OUT terminal is
changed manually. Change the HDMI
Resolution setting (page 26). Settings for
two units can be stored in the memory.

Connections 02

Match the direction
of the plug to the
terminal and insert
straight.

To HDMI input terminal

HDMI cable
(commercially
available)

TV

Match the direction
of the plug to the
terminal and insert
straight.

To HDMI input
terminal

HDMI cable
(commercially
available)

TV

From HDMI output terminalAV receiver

or amplifier

HDMI cable
(commercially available)

• This unit is designed for connection to
HDMI-compatible devices. It may not
operate properly if connected to DVI
devices.

Connecting to a TV

This unit’s rear panel

English

Connecting to an AV receiver or
amplifier

This unit’s rear panel

Français Español

• If you connect this unit to your television
with the HDMI cable, sound can not be
transferred from your television to this unit.
To listen to sound, connect the rear panel
AUX IN mini-plug jack to your television.

9

En

Connections02

Audio signals that can be output
from this unit’s HDMI OUT
terminal

• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2­channel linear PCM audio (including 2­channel downmixing)

• Dolby Digital 5.1-channel audio

• DTS 5.1-channel audio

•MPEG audio

• Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.

Plugging in

After you’ve finished making all connections,
plug the unit into an AC outlet.

1 Plug the supplied power cord into the
IN

socket on the back of the unit.

2 Plug the other end into a power outlet.

Important

• Before making or changing any
connections, switch off the power and
disconnect the power cord from the AC
outlet.

AC

10

En

Controls and displays 03

STANDBY/ON

FUNCTION

AUDIO

SUBTITLE

SOUND ZOOM

ANGLE

TIMER/CLOCK

1 23

CLEAR

SHIFT

456

789

0

TOP MENU

MENU

TUNE+

TUNE-

ST- ST+

ENTER

RETURN

REPEATSLEEP USB REC DISPLAY

PLAY

PREV PAUSE STOP NEXT

HOME
MENU

VOLUME

5

6

10

11

4

8

12

13

1

2

3

7

9

21

14

15

18

19

20

22
23

17

16

Chapter 3:

Controls and displays

Remote control

1  STANDBY/ON

Press to turn the power on and off.

2

Use to set the clock (page 29).

3

VOLUME –/+

Use to set the listening volume. (Default
setting: 10)

4 Number buttons (0 to 9)

Use these to specify and play the title,
chapter, track or file you want to view/
listen to. Also use them to select the
station preset when using the tuner, etc.

AUDIO*

For discs or files including multiple audio
streams/ channels, the audio stream/
channel can be switched during playback.
For files stored in iPod/iPhone, this button
is not available.

SUBTITLE

On DVD-Video or DivX discs containing

subtitles in multiple languages, the

subtitle can be switched during playback.

SOUND

Turns the Virtual Surround on and off

(page 28). Also use to adjust the bass and

treble.

ANGLE

On DVD-Video discs containing multiple

angles, the angle can be switched during

playback.

ZOOM

Zooming on the image. For images stored
in iPod/iPhone, this button is not available.

English

Français Español

TIMER/CLOCK

*

*

*

*

11

En

Controls and displays03

Audio Settings

Play Mode Disc Navigator

Initial Settings

Video Adjust

HOME MENU

DVD

CD –> USB Rec

5

TOP MENU

Press to display the top menu of the DVD­Video.

6

///

Use these to select items, change settings
and move the cursor. For iPod/iPhone’s
menu screen, this button is not available.

ENTER

Use this to implement the selected item or
enter a setting that you have changed. For
iPod/iPhone’s menu screen, this button is
not available.

ST +/–

Use these to select station presets.

TUNE +/–

Change the frequency one step at a time.
To search for stations automatically, press
and hold for about a few second.

7

HOME MENU

When selecting a DVD or USB storage device
input, press to display/ hide the HOME MENU.
When selecting the other input, this button is
not available.

• Audio Settings (page 24)

• Video Adjust (page 25)

• Play Mode (this page)

• Disc Navigator (MENU on page 13)

• Initial Settings (page 26)

• CD -> USB Rec (page 20)

Play Mode

Play Mode

A-B Repeat
Repeat
Random
Program
Search Mode

A(Start Point)

B(End Point)
Off

•A-B Repeat

The specified section within a single title or
track is played repeatedly.

• Repeat

Plays titles, chapters, tracks or files
repeatedly.

• Random

Plays titles, chapters or tracks in random
order.

• Program (page 19)

Plays titles, chapters, tracks or files in the
order in which you program them.

• Search Mode

Plays the specified number or time within
the title, chapter, track or file.

The Play Mode function may not work for some
discs or files. For files stored in iPod/iPhone,
this function is not available.

8

 PLAY

Press to start playback.

9 //

• Press during playback to fast-reverse.

• Press in the pause mode to move
backward frame-by-frame. (DVD-Video or
DVD VR discs only)

• Press and hold in while in the pause mode
for slow play in the reverse direction. (DVD­Video or DVD VR discs only)

10

 PREV

Press to return to the beginning of the
currently playing title, chapter, track or file.
Press twice to move back to the beginning of
the previous title, chapter, track or file.

12

En

Controls and displays 03

01

04

02

05

03

06

Disc Navigator: Title
01- 49: – –

11

PAUSE

Press to stop playback temporarily. Press
again to resume.

12

SLEEP

Use to put the unit in sleep mode and select
the amount of time before sleep (page 30).

13

REPEAT

Plays titles, chapters, tracks or files repeatedly.
(For iPod/iPhone, this button is not available.)

14

FUNCTION

Use to select an input source. Press repeatedly
to switch between iPod/iPhone, DVD/CD, USB,
TUNER and external input (AUX).

15

SHIFT

Press to access the ‘boxed’ commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (*) in this section.

16

CLEAR

Press to clear the selected item. Use this for
example if you input the wrong number.

17

MENU

• Press to display the menu screen or Disc
Navigator.

• Select and play the title, chapter, track or
file from the Disc Navigator.

• For iPod/iPhone, this button is not
available.

Ex.: DVD-Video Disc Navigator

19 //

• Press during playback to fast-forward.

• Press in the pause mode to move forward
frame-by-frame. (DVD-Video, DVD VR,
Video CD or DivX discs only)

• Press and hold in while in the pause mode
for slow play in the forward direction. (DVD­Video, DVD VR, Video CD or DivX discs
only)

20

 NEXT

Press during playback to skips ahead to the
beginning of the next title, chapter, track or file.

21

 STOP

When  STOP is pressed during playing a disc
or USB storage device, the point at which
playback was stopped is stored in the memory.
When  PLAY is pressed, playback resumes
from the point at which it was stopped (except
MP3 and WMA files).

22

DISPLAY

The elapsed time, amount remaining, etc., is
displayed. (When playing files stored in iPod/
iPhone or playing in TUNER or AUX mode, they
are not displayed.)

23

USB REC

Press to display the CD ->USB Rec and
recoding starts. This unit records all tracks
with the bitrate that is set at previous
recording. Only when a CD is in the stop mode,
this button is available. If you want to record
the specified tracks or change the bitrate,
press HOME MENU and select the CD ->USB
Rec.

English

Français Español

RETURN

18

Press to return to the previous screen. Also,
use to cancel the clock setting or the sound
setting.

13

En

Controls and displays03

TIMER HDMI TUNE

1 2 3 4 6

119 12

8

5

1413 13

10

7

Front/top panel

1  STANDBY/ON

Switches the unit between standby and on.

2

FUNCTION

Use to select an input source. Press repeatedly
to switch between iPod/iPhone, DVD/CD, USB,
TUNER and external input (AUX).

3  PLAY/PAUSE

Press to start playback. During playback,
pause/ unpause playback.

4

 STOP

When  STOP is pressed during playing a disc
or USB storage device, the point at which
playback was stopped is stored in the memory.
When  PLAY is pressed, playback resumes
from the point at which it was stopped. When
playing MP3 or WMA file, playback can not
resume.

5

Disc slot

6

EJECT

Eject the disc.

7

VOLUME –/+

Use to set the listening volume. (Default
setting: 10)

8 USB terminal

When no USB storage device is connected,
install the USB terminal cover.

WARNING

Store the USB terminal cover out of the
reach of children and infants. If
accidentally swallowed, contact a doctor
immediately.

9Display
10

TIMER

indicator

When the wake-up timer is set to ON, this
indicator lights.

11 HDMI indicator

When this unit is recognized by another HDMI
compatible component, this indicator lights.

12

TUNE

indicator

When the tuner receives FM broadcasts while
the TUNER input is selected, this indicator
lights.

13 Speaker units
14 iPod/iPhone connector ports

14

En

iPod/iPhone playback 04

Note

Chapter 4:

iPod/iPhone playback

Merely by connecting your iPod/iPhone to this
speaker system, you can enjoy high-quality
sound from your iPod/iPhone. This unit can
also be connected to a television set, letting
you view movies and images from your iPod/
iPhone. When connecting to a television set,
use the included audio/video cable. This unit
can not transfer iPod/iPhone’s musics, movies
and images from the HDMI OUT terminal.

Playback setting for iPod/iPhone music and
images can be performed from this unit or the
iPod/iPhone itself. This unit can not record
sound of CD and tuner, etc. to iPod/iPhone.

Confirm what iPod/iPhone
models are supported

The iPod/iPhone playable on this unit are
shown below.

iPod/iPhone Audio Video

iPod nano 1/2G 
iPod nano 3/4/5G 
iPod classic 2007 
iPod classic 2008 
iPod classic 2009 
iPod touch 1G 
iPod touch 2G 
iPod touch 2G 2009
iPhone 
iPhone 3G/3GS 

1



Always use the most recent version of iPod/
iPhone software available. Operation
compatibility may vary depending on the
version of the software used. You can confirm
your software version by operating your iPod/
iPhone as follows:

1 Select ‘Settings’ from the top menu.

When using iPod touch or iPhone, select
‘General’ after selecting ‘Settings’.

2 Select ‘About’.

The software version will be displayed.

• Consult the Apple website regarding the
newest software versions and instructions
on how to update your version.

Tip

• When using an iPod/iPhone not supported
by this unit, use a commercially available
cable to connect the iPod/iPhone to the
AUX IN connector of this unit.

English

Français Español

1 • Pioneer does not guarantee that this unit plays iPod/iPhone other than the ones specified.

• Some functions may be restricted depending on the model or software version.

• iPod/iPhone is licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.

• Features such as the equalizer cannot be controlled using this system, and we recommend switching the equalizer off before
connecting.

• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience
or loss of recorded material resulting from the iPod/iPhone failure.

• For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.

15

En

iPod/iPhone playback04

MENU





iPod nano/

iPod classic/

iPod touch/

iPhone

Universal dock

adapter

Note

Connecting your iPod/iPhone

Caution

• When connecting an iPod/iPhone units,
always use the universal dock adapter
provided with your iPod/iPhone, or a
commercially adapter designed to support
iPod/iPhone. The iPod/iPhone cannot be
connected without a universal dock
adapter; attempting to connect an iPod/
iPhone without a universal dock adapter
will cause damage or malfunction.

of the adapter into the depressions on the
iPod/iPhone connector port and press into
position. When attaching the adapter, be
careful not to strike the connectors.

2 Connect your iPod/iPhone.

• If an iPod/iPhone is connected when this
unit is in standby mode, the power will turn
on and playback of the iPod/iPhone will
begin.

Connecting your TV

1

To watch iPod/iPhone images on a television,
perform connections using the included audio/
video cable. For details, see Connecting using
an audio/video cable on page 8.

• When an iPod/iPhone is connected to this
unit, the iPod/iPhone’s TV output setting is
automatically set to ON.

2

Caution

• Before making or changing the
connections, switch off the power and
disconnect the power cord from the power
outlet. Plugging in should be the final step.

1 Attach the Universal dock adapter to
iPod/iPhone connector port on the front
panel of this unit.

• An iPod/iPhone universal dock adapter is
not supplied with this unit.

When attaching the Universal dock adapter, be
sure to orient the front-back directions of the
Universal dock adapter correctly. To attach,
first place the protruding tabs on the front side

1 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.
2

• Some iPods allow the TV output setting to be changed while connected.

• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone’s TV output setting returns to its original state.

16

En

iPod/iPhone playback 04

Note

Playing your iPod/iPhone

Caution

• When your iPod/iPhone is connected to
this unit and you wish to operate the iPod/
iPhone by touching it directly, be sure to
hold the iPod/iPhone steady with the other
hand to prevent malfunctions due to faulty
contacts.

1 Connect your iPod/iPhone.

• If an iPod/iPhone is connected when this
unit is on, playback of the iPod/iPhone will
not begin.

2 Press

‘ ’ is displayed on the front panel display.

3 Press

FUNCTION

 PLAY

• The available iPod/iPhone’s playback
control by touching this unit directly is ,
, , , , , .

• In the following case, operate your iPod/
iPhone directly

- You want to search a file by artist name
or genre.

- You want to play in the repeat or shuffle
mode.

- You want to watch images stored in
iPod/iPhone on your television.

to select the iPod input.

.

1

:

• Reconnect the iPod/iPhone to the unit. If
this doesn’t seem to work, try resetting
your iPod/iPhone.

• Update the iPod/iPhone software to the
latest version.

If the iPod/iPhone cannot be operated, check
the following items:

• Is the iPod/iPhone connected correctly?
Reconnect the iPod/iPhone to the unit.

• Is the iPod/iPhone experiencing a hangup?
Try resetting the iPod/iPhone, and
reconnect it to the unit.

Tip

• iPod/iPhone recharging occurs whenever
an iPod/iPhone is connected to this unit.
(This function is supported in standby
mode as well.)

• When this unit’s power is turned ON with
another function is selected, even if an
iPod/iPhone is connected, playback will
not automatically begin.

• If the unit is set to standby when an iPod/
iPhone is connected, the iPod/iPhone’s
power will be turned OFF automatically.

English

Français Español

Important

If this unit can not play the iPod/iPhone or ‘Err’
is displayed, perform the following
troubleshooting checks:

• Check whether the iPod/iPhone was
supported by this unit.

1 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.

17

En

Disc playback05

Slot a disc with
the label side
facing front.

Chapter 5:

Disc playback

Playing discs or files

Note

• By using the number buttons (0 to 9), you
can specify and play the title, chapter, track
or file you want to view/ listen to.

• When playing a DVD-Video or DivX discs,
turn the TV’s power on and switch the TV’s
input before starting.

• This unit’s screen display language can be
changed (OSD Language on page 27).

1Press
on.

The selected input is displayed on the front
panel display.

2Press
input.

Please wait until the indicator changes from
flashing ‘ ’ to ‘ ’.

When a disc has already been slotted in the
disc slot, press  EJECT to eject the disc.

3Slot a disc.

Playback will begin automatically.

 STANDBY/ON

FUNCTION

to select the DVD/CD

to turn the power

• Hold the disc as shown in the illustration,
insert it in the center of the disc slot, and
press in gently from above.

• The disc will then be automatically drawn
into the slot.

Note

• If the disc does not load smoothly, do not
attempt to force it. Remove it from the slot
and try inserting it again. Attempting to
force a disc causes damage or
malfunction.

• Do not touch the recording surface of the
disc, since the disc may not play properly if
it has fingerprints or other soiling.

• Adapters for 8 cm CDs cannot be used
when you play a 8 cm CD/DVD.

Eject a disc from this unit

• Press

 EJECT

.

Example of display on the front
panel display

When the power is turned on (ON)

18

En

When the power is turned off (OFF)

When the disc is being loaded (LOAD)

Disc playback 05

When the title menu or menu is displayed
(TITLE)

When the GUI is displayed or operated (GUI)

When the disc is stopped (STOP)

When no disc is loaded

Playing in the desired order
(Programmed Play)

1 Press

The HOME MENU is displayed.

2Use / to select ‘
press ENTER.

The Play Mode screen is displayed.

3Use / to select ‘
ENTER or

4Use
press

The Create/ Edit screen differs according to the
disc or file.

HOME MENU



.

/

to select ‘

ENTER

.

.

Play Mode

Program

’, then press

Create/Edit

’, then

’, then

5Use /
chapter, track or file, then press

Program

Program Step

01.

02.

03.

04.

05.

06.

07.

08.

//

to select the title,

ENTER

Title 1-01

Title 01

Chapter 1-015
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008

.

• To add to a program, first select the place
in the program (the program step), next
select the title, chapter or track, then press
ENTER (files are added at the end of
program).

•Press RETURN to return to the previous
screen. If you return to the previous screen
when inputting it, the settings you have
programmed are cleared.

• To delete a step, highlight it and press

CLEAR.

6Press  to start playback.

• To play a program that has already been
set, select ‘Playback Start’ from the
program screen, then press ENTER.

• To resume normal playback, select
‘Playback Stop’ from the program screen,
then press ENTER. The program remains in
the memory.

• To cancel the entire program, select
‘Program Delete’ from the program
screen, then press ENTER.

Note

• Programs can be played repeatedly. Select
‘Program Repeat’ from ‘Repeat’ on the
play mode screen during programmed
playback.

• Programs cannot be played in random
order (random play is not possible during
programmed play).

English

Français Español

19

En

USB playback06

Chapter 6:

USB playback

Playing files stored on USB
devices

• This unit may not recognize the USB
device, may not play files or may not supply
power to the USB device. For details, see
When a USB device is connected on
page 36.

• Pioneer does not support that all files
recorded on all USB devices will play or
that power will be supplied to the USB
device. Also note that Pioneer will accept
no responsibility whatsoever for loss of files
on USB devices caused by connection to
this unit.

1Press
on.

The selected input is displayed on the front
panel display.

2Press

‘ ’ is displayed on the front panel display.

3 Connecting USB devices.

The Disc Navigator appears automatically.

When a USB storage device is connected to
the USB terminal, remove the USB terminal
cover.

 STANDBY/ON

FUNCTION

1.

Push the USB terminal cover as shown
on the diagram below.

to turn the power

to select the USB input.

2.

Pull the USB terminal cover.

WARNING

Store the USB terminal cover out of the
reach of children and infants. If
accidentally swallowed, contact a doctor
immediately.

4Use /
press

Playback starts.

•If you press  PLAY, this unit will play

• Turn the power off before removing the

//

ENTER

automatically files stored in a USB storage
device.

USB storage device.

to select the file, then

.

Recording audio CD tracks on
USB devices

• The tracks of audio CDs loaded in this unit
can be recorded on a USB device
connected to the USB terminal. This unit
can not record the other input’s sound.

• It may not be possible to record tracks of
audio CDs on a USB device. For details, see
When a USB device is connected on
page 36.

20

En

USB playback 06

Start

Selected Track
Total Time

00

000:00

Select Track
Bitrate

Individual
Select All
All Clear

01:43
03:17
04:18
04:59
04:20
04:38
04:40
04:11

Track 1–13
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08

CD –> USB Rec

Recording all the tracks

1 Load the audio CD.

• If playback starts automatically, press

STOP to stop playback. Only when a CD
is in the stop mode, recording can start.

2 Press

USB REC

.

The CD -> USB Rec screen is displayed.

CD –> USB Rec

Select Track
Bitrate

Start
Selected Track

Total Time

128kbps

055:07

13

Track 1–13

Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08

01:43
03:17
04:18
04:59
04:20
04:38
04:40
04:11

Selecting the track(s) to be recorded

1 Load the audio CD.

• If playback starts automatically, press

STOP to stop playback. Only when a CD
is in the stop mode, recording can start.

2 Press

The HOME MENU is displayed.

3Use /
then press

HOME MENU

//

ENTER

to select ‘CD -> USB Rec’,

.

.

• All Clear: Deselect all the tracks.

5Use /
(transfer rate), then press

//

to select ‘Bitrate’

ENTER

.

Select ‘128kbps’, ‘192kbps’ or ‘320kbps’.
6Use /

press

ENTER

//

.

to select ‘

Start

’, then

Recording starts.

Note

• If recording does not start, confirm this
unit's settings on the TV screen.

• The audio signals are converted into MP3
format for output.

•‘CD -> USB Rec’ can only be selected when
the audio CD is stopped.

• When recording is completed, a folder
named “PIONEER” is automatically
created on the USB device. The recorded
tracks are stored in this folder.

Playing in the desired order
(Programmed Play)

This unit can play repeatedly files stored in the

storage device. For details, see Playing in

USB

the desired order (Programmed Play)

on page 19.

English

Français Español

///

4Use
‘

Individual’ 

record.

• Individual: Select 1 track at a time.

• Select All: Select all the tracks.

to select ‘

the track(s) you want to

Select Track’ 

21

En

Using the tuner07

Note

Chapter 7:

Using the tuner

• This unit can not transfer FM radio from the
HDMI OUT terminal.

Connect the FM antenna

Connect the FM antenna plug onto the center
pin of the FM antenna socket.
not transfer FM radio from the HDMI OUT
terminal.

1

This unit can

Listening to the FM radio

The tuner can receive FM broadcasts, and lets
you memorize your favorite stations so you
don’t have to manually tune in every time you
want to listen.

1Press

The tuned frequency will be displayed on the
front panel display (e.g., ‘ ’).

2 Tune to a station.

When the tuner receives FM broadcasts, the
TUNE indicator lights.

There are two ways to do this:

Memorizing stations

You can save up to 9 station presets so that you
always have easy access to your favorite
stations without having to tune in manually
each time.

FUNCTION

Automatic tuning - To search for stations,

press and hold TUNE +/– for about a few
second. This unit will start searching for
the next station, stopping when it has
found one. Repeat to search for other
stations.

Manual tuning - To change the frequency
one step at a time, press TUNE +/–.

2

to switch to the tuner.

• Manually saving station presets
1 Press

The tuned frequency will be displayed on the
front panel display.

2 Tune to an FM radio station.
3 Press number button (1 to 9) for three

seconds.

The tuned frequency is preset to the selected
number button. The previous station preset is
overwritten.

• Automatically saving station presets
1 Press

The tuned frequencies will be preset to the
buttons in numerical order.
Auto tuning stops automatically after the FM
band is finished, or after the limit of 9 presets
has been reached.

FUNCTION

ST +

to switch to the tuner.

for three seconds.

Listening to station presets

1 Press

The tuned frequency will be displayed on the
front panel display.

2 Press number button (1 to 9) that is
memorized the FM radio station.

• Press ST + repeatedly to selected the

FUNCTION

Tip

station preset in numerical order.

to switch to the tuner.

1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will
be overwritten with the new one.

22

En

Other connections 08

Digital audio
player, etc.

Stereo mini-plug cable
(commercially available)

Chapter 8:

Other connections

• Before making or changing the
connections, switch off the power and
disconnect the power cord from the AC
outlet.

• If the AUX IN mini-plug jack is connected to
auxiliary phones jack, this unit’s volume
will be changed by the playback
component’s volume. If the sound is
distorted after you lower this unit’s volume,
try lowering the auxiliary playback
component’s volume.

• This unit can not transfer the external
input’s sound from the HDMI OUT
terminal.

Connecting auxiliary
components

Connect the rear panel AUX IN mini-plug jack
to your auxiliary playback component.

• This method can be used to play music on
this unit from iPod/iPhones that do not
support use of an iPod Dock.

•Press
mode.

When the AUX input is selected, ‘ ’ is
displayed on the front panel display.

FUNCTION

English

Français Español

to switch to AUX input

23

En

Changing the settings09

Chapter 9:

Changing the settings

The factory default settings are indicated in

Note

• The following settings is available for a disc or USB storage device content. These are not
available for iPod/iPhone, tuner, external input (AUX).

• In the USB mode, you can only change the Play Mode and Audio Settings on the HOME MENU
screen.

italic

.

Audio Settings parameters

Settings What it does

Sound Retriever
(High/Low/

Equalizer

Off

(
Dance/ Techno/
Classic/Soft)

Audio DRC
(High/Medium/Low/

Off

Dialog
(High/Medium/Low/

Off

Off

)

/Rock/Pop/Live/

)

)

• The sound of a WMA or MP3 file is played with high sound quality. This is
only valid for files with the extension “.wma” or “.mp3”.

• The effect depends on the file. Try different settings, and choose the one
providing the good effect.

Select according to the genre of music to be listened to.

• This makes loud sounds weaker and weak sounds louder. Change the
setting for example when watching movies late at night.

• This setting only affects Dolby Digital sound.

• The effect depends on the volume of the connected TV, AV receiver or
amplifier, speakers, etc. Try different settings, and choose the one
providing the strongest effect.

Change this setting if the sound of dialogs is low and the dialogs are hard to
hear. This setting only affects multichannel sound.

About Sound Retriever function

When audio data is removed during the compression process, sound quality often degrades. The
Sound Retriever function automatically enhances compressed audio and restores CD quality
sound.

24

En

Changing the settings 09

Note

• The following settings is available for a disc or USB storage device content. These are not
available for iPod/iPhone, tuner, external input (AUX).

• In the USB mode, you can only change the Play Mode and Audio Settings on the HOME MENU
screen.

Video Adjust parameters

Settings What it does

Sharpness
(Fine/

Standard

Brightness
(-20 to +20)

Contrast
(-16 to +16)

Gamma
(-3 to +3)

Hue
(green 9 to red 9)

Chroma Level
(-9 to +9)

Brightness, Contrast, Gamma, Hue and Chroma Level are set to 0 upon purchase.

/Soft)

Adjusts the picture’s sharpness.

Adjusts the picture’s brightness.

Adjusts the ratio of the brightness of the brightest and darkest portions of the
picture.

Adjusts the look of the dark portions of the picture.

Adjusts the balance between green and red.

Adjusts the density of the colors. This setting is effective for sources with
many colors, such as cartoons.

English

Français Español

25

En

Changing the settings09

Note

• The following settings is available for a disc or USB storage device content. These are not
available for iPod/iPhone, tuner, external input (AUX).

• In the USB mode, you can only change the Play Mode and Audio Settings on the HOME MENU
screen.

Initial Settings parameters

• This unit’s detailed settings can be changed here.

• Initial Settings cannot be selected during playback. Stop the disc first.

Digital Audio Out settings

Settings What it does

HDMI Out

Select the audio signals to be output from the

(2CH)/

Auto

Video Output settings

Settings What it does

TV Screen

HDMI Resolution

HDMI Color

Change the picture’s display format (

(Wide)/16:9 (Compressed)

Change the resolution of the video signals output from the HDMI OUT
terminals (
the image does not appear correctly after changing the setting, return the
setting to “

to their defaults

Change the video signals output from the HDMI OUT terminal (

RGB/RGB/

/Off

) according to the connected HDMI-compatible device.

4:3 (Letter Box)

), according to the connected TV.

720x480i/

720x480p

Component

720x480p

.” Refer to

on page 27.

).

/1280x720p/1920x1080i/1920x1080p

Setting the HDMI Resolution settings back

HDMI OUT

terminal (

/4:3 (Pan & Scan)/16:9

LPCM

). If

Full range

Language settings

Settings What it does

Audio Language

Subtitle Language

DVD Menu Lang.

Subtitle Display

• If the above setting is used to select

26

En

Language Code Table on page 39.

Change the language when listening to the sound of DVD-Video discs
(

Change the language of the subtitles displayed for DVD-Video discs (
available languages/

Change the language used for the menu displays of DVD-Video discs
(

Select whether to display subtitles (

English

/

available languages

w/ Subtitle Lang.

/Other Language

Other Language

/

available languages

“

Other Language

).

English

).

/Other Language

On

) or not (

Off

).

).

,” perform operations while referring to

/

Changing the settings 09

Note

• The following settings is available for a disc or USB storage device content. These are not
available for iPod/iPhone, tuner, external input (AUX).

• In the USB mode, you can only change the Play Mode and Audio Settings on the HOME MENU
screen.

Display settings

Settings What it does

OSD Language

Angle Indicator
On Screen Display

Change the language of the operation messages (

English

on the TV screen (

Select whether to display the angle mark on the TV screen (

Select whether to display operation messages (
screen (

On

) or not (

/available languages).

Off

).

Play, Stop

Play, Stop

, etc.) displayed

On

) or not (

Off

, etc.) on the TV

Options settings

Settings What it does

Parental Lock

DivX VOD

Restrict DVD-Video viewing (

Country/Area Code Table

Display the registration code required for playing DivX VOD files (

Deactivate

).

Password/Level Change/Country Code

on page 39 in order to set the “Country Code.”

Activate/

). See

Setting the HDMI Resolution settings back to their defaults

English

Français Español

).

1 Press
2 Press

Use the buttons on this unit’s top panel. The power turns on.

 STANDBY/ON
 STANDBY/ON

to turn this unit’s power off.
while pressing

VOLUME –

.

Restoring all the settings to the defaults

Note

• The preceding settings is restore to the default.

1 Press
2 Press

‘ ’ is displayed during restoring all the settings.

 STANDBY/ON
 STANDBY/ON

to turn this unit’s power off.
while pressing

STOP.

27

En