Pioneer V9000 User Manual

Encoder Settings for The

Pioneer HD-V9000

Pioneer Corp.

March 2010

Introduction

The purpose of this data is to offer support for the various encoding parameters required for use

If the set values are changed, please confirm the decipherment

by using the HD-V9000

The setvalues as defined on this page are divided into "Broadcast System (NTSC/PAL), CODEC (MPEG-2, H.264/AVC), and each of its usage."

Usage is defined to mean "Normal HD video, High quality HD video, Long duration HD video, Standard Definition (SD) video."

with the player. Its purpose is to use the data as a reference/check sheet of your encoded content.

These set values were tested and confirmed by Pioneer Corp. Changes in the set values are possible based on customer's requirements.

before the actual application operation is scheduled to start.

The video bitrates noted in this list shows the value as it pertains to the video. The set values that exists in this list can change without notice.

Pioneer Corp.

Confirmed operation encoders

3.1

3.3

3.1

3.3

The encoding software used for playback testing and use with the HD-V9000 and its associated programing were as follows:

MPEG2

Soft Vender Application Version Note

MainConcept MPEGPro HD V3 MainConcept MPEGPro HD 4 4.02 Plug-in of Adobe Premiere Pro

MainConcept Reference 1.6 Canopus Procoder 3 3.03

H.264/AVC

Soft Vender Application Version Note

MainConcept MPEGPro HD V3 MainConcept MPEGPro HD 4 4.02 Plug-in of Adobe Premiere Pro

MainConcept Reference 1.6 Canopus Procoder 3 3.03

Please refer to the set value(s) in the attached table for a detailed parameter listing. This list is subject to be updated with additional information.

Plug-in of Adobe Premiere Pro

Pioneer Corp.

Confirmed Encoder Setting Parameters

MainConcept

V3,

MultiplexType

Sequence header

MultiplexType

:MPEG2 Transport Stream

Sampling rate 48KHz

changed to Dolby

:MPEG2 Transport Stream

Sampling rate 48KHz

MultiplexType

:MPEG2 Transport Stream

MultiplexType

:MPEG2 Transport Stream

changed to Dolby

MultiplexType

:MPEG2 Transport Stream

<For Japan and

MultiplexType

:MPEG2 Transport Stream

Sampling rate 48KHz

Tested encoder

MainConcept MPEGProHD V3 MainConcept MPEGProHD 4 MainConcept Reference Canopus Procoder 3

Tested Parameter

MPEG-2

Normal

HD

Parameter

High

quality HD

Parameter

North America>

Long

Duration

HD

Parameter

SD

Parameter

Normal

HD

Parameter

High

quality HD

Parameter

Long

Duration

HD

Parameter

SD

Parameter

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR OPEN/CLOSED GOP I Frame Distance Sequence header Audio

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR OPEN/CLOSED GOP I Frame Distance

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR OPEN/CLOSED GOP I Frame Distance Sequence header Audio

Profile@Level Frame Size Frame Rate Video Bitrate CBR/VBR OPEN/CLOSED GOP I Frame Distance

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR OPEN/CLOSED GOP I Frame Distance Sequence header Audio

: Parameter setItems

:MP@HL :1920*1080i :29.97fps :Top Feld First :40Mbps :CBR :CLOSED GOP :15 :Each GOP :Dolby Digital 384kbps

:422P@HL :1920*1080i :29.97fps :Top Field First :55Mbps :CBR :CLOSED GOP :15 :Each GOP :LPCM SMPTE302M

Quantization 16bit

:MP@HL :1920*1080i :29.97fps :Top Field First :20Mbps :CBR :CLOSED GOP :15 :Each GOP :MPEG1-Layer2 224kbps

:MP@ML :720*480i :29.97fps :Top Field First :15Mbps :CBR :CLOSED GOP :15 :Each GOP :MPEG1-Layer2 224kbps

:MP@HL :1920*1080i :25fps :Top Field First :40Mbps :CBR :CLOSED GOP :13 :Each GOP :Dolby Digital 384kbps

:422P@HL :1920*1080i :25fps :Top Field First :55Mbps :CBR :CLOSED GOP :13 :Each GOP :LPCM SMPTE302M

Quantization 16bit

:MP@HL :1280*720p :50fps :20Mbps :CBR :CLOSED GOP :13 :Each GOP :MPEG1-Layer2 224kbps

:MP@ML :720*576i :25fps :Top Field First :15Mbps :CBR :CLOSED GOP :13 :Each GOP :MPEG1-Layer2 224kbps

MPEGPro HD

Good

Good Good

Good

Good Good

Good

Application name

MainConcept

Reference

(Because the

application

cannot select

LPCM. The

MPEG1-Layer 2

is Good when

(Because the

application

cannot select

LPCM. The

MPEG1-Layer 2

is Good when

Note: Please check with encoding manufacturer regarding their requirments for setting up the encoding parameters

Date: February 2010

No Good

Digital)

Good

No Good

Digital)

Good

Canopus

Procoder 3

Good

Confirmed Encoder Setting Parameters

MainConcept

V3,

changed to Dolby

<For Japan and

Multiplex Type

:MPEG2 Transport Stream

Multiplex Type

:MPEG2 Transport Stream

changed to Dolby

Multiplex Type

:MPEG2 Transport Stream

Tested encoder

MainConcept MPEGPro HD V3 MainConcept MPEGPro HD 4 MainConcept Reference Canopus Procoder 3

Tested Parameter

H.264/AVC

Normal

HD

Parameter

High

North America>

quality HD Parameter

Long

Duration

HD

Parameter

Normal

HD

Parameter

High quality HD Parameter

Long

Duration

HD

Parameter

Items : Parameter set

Multiplex Type Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR entropy coding

IDR Frequency I Frame Distance Sequence Parameter Set

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR entropy coding IDR Frequency I Frame Distance Sequence Parameter Set Audio

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR entropy coding

IDR Frequency I Frame Distance Sequence Parameter Set Audio

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR entropy coding

IDR Frequency I Frame Distance Sequence Parameter Set Audio

Profile@Level Frame Size Frame Rate Field Order Video Bitrate CBR/VBR entropy coding IDR Frequency I Frame Distance Sequence Parameter Set Audio

Profile@Level Frame Size Frame Rate Video Bitrate CBR/VBR entropy coding

IDR Frequency I Frame Distance Sequence Parameter Set Audio

:MPEG2 Transport Stream :HP@L4.1 :1920*1080i :29.97fps :Top Field First :30Mbps :CBR :CABAC (If the bitrate exceeds 30Mbps, it is necessary to make it to CAVLC) :1 :15 :Per IDR

:HP@L4.1 :1920*1080i :29.97fps :Top Field First :45Mbps :CBR :CAVLC :1 :15 :Per IDR :LPCM SMPTE302M

Quantization 16bit

:MP@L4.1 :1920*1080i :29.97fps :Top Field First :10Mbps :CBR :CABAC (If the bitrate exceeds 30Mbps, it is necessary to make it to CAVLC) :1 :33 :Per IDR

:MPEG2 Transport Stream :HP@L4.1 :1920*1080i :25fps :Top Field First :30Mbps :CBR :CABAC (If the bitrate exceeds 30Mbps, it is necessary to make it to CAVLC) :1 :13 :Per IDR :MPEG1-Layer2 224kbps

:MPEG2 Transport Stream :HP@L4.1 :1920*1080i :25fps :Top Field First :45Mbps :CBR :CAVLC :1 :13 :Per IDR :LPCM SMPTE302M

Quantization 16bit Sampling rate 48KHz

:MP@L4.1 :1280*720p :50fps :10Mbps :CBR :CABAC (If the bitrate exceeds 30Mbps, it is necessary to make it to CAVLC) :1 :33 :Per IDR :MPEG1-Layer2 224kbps

MPEGPro HD

Good

Good Good

Application name

MainConcept

Reference

Note: Please check with encoding manufacturer regarding their requirments for setting up the encoding parameters

Date: February 2010

Good

Canopus

Procoder 3

Good

No Good

(Because the

application

cannot select

LPCM. The

MPEG1-Layer2

is Good when

Digital)

Good

GoodGood Good

No Good

(Because the

application

cannot select

LPCM. The

MPEG1-Layer2

is Good when

Digital)

No Good

(The application

doesn't

correspond to

720p/50fps.)

Content Production Notes For Playback With The Pioneer HD-V9000

720×576/50i

302M-2002

Dolby Digital Decoder

Version 3.0

(MPEG-4 AAC

1. Production of the video file must be produced using MPEG-TS (Transport Stream).

HD-V9000 cannot playback ES (Elementaly Stream) file(s).

2. MPEG2-TS (Transport Stream) should follow the Codec, Profile, Bitrate, and Parameter settings noted in the below "Video Format Lists" and the "Audio Format Lists"

3. Multiplexing of the audio stream with the videostream is required.

In cases where the video does not include audio, it is required to multiplex a silent audio stream.

4. Create the video with "TOP FIELD FAST" for interlace video.

5. Include SH (Sequence Header) in the head of "GOP" of MPEG 2 video encoded file.

6. Include SPS, (Sequence Parameter Set) of H.264 video encodedfile.

7. The interval for I (IDR) and P framesis three. (example: I B B P B B P B B P ・・・・・・ )

8. Encode must use the parametervaluenoted on associatedpage.

If the user sets custom/default parameter(s), issues could occur with playback of content Usershould test the video playback with HD-V9000 beforestarting the applications operation.

Encode case list

TV SYSTEM Codec Usage Detail Parameter

NTSC

Frame Rate

29.97fps

(forJapan and North

America)

PAL

Frame Rate

25fps

(forEurope)

H.264/AVC

MPEG2

H.264/AVC

MPEG2

Normal HD ==> High Quality HD ==> Long Duration HD ==> Normal HD ==> High Quality HD ==> Long Duration HD ==> SD (Standard Definition) ==> Normal HD ==> High Quality HD ==> Long Duration HD ==> Normal HD ==> High Quality HD ==> Long Duration HD ==> SD (Standard Definition) ==>

Click! Click! Click! Click! Click! Click! Click! Click! Click! Click! Click! Click! Click! Click!

Video formats Lists

Container

MPEG2-TS

(ISO/IEC 13818-1)

・Manufactured under licensefrom Dolby Laboratories. “Dolby” and the double-D symbol

aretrademarks ofDolby Laboratories.

・Use files with the extensions “.m2t” and “.mpg”. ・Only file names in ASCII format can be recognized. ・When menu operations, networkconnectionsor other such operations are performed while

playing video files with a high bit rate the picture or sound may stop or be disturbed.

・Regardless of the video file’s bit rate, the picture or sound may stop or be disturbed

if the SDHC memory card operations (copying, deleting, etc.) are performed during playback.

Audio Formats Lists

MPEG-1 Audio Layer-2

Codec Profile@Level Bitrate (max) Format Codec

MPEG-2 (ISO/IEC 13818-2)

H.264/AVC

(ISO/IEC

14496-10)

Codec

LPCM

MP@ML 15Mbps

422P@ML 50Mbps

MP@HL 60Mbps

422P@HL 60Mbps

MP@L3.1 14Mbps

MP@L4.1

HP@L4.1

H422@L4.0

No. channels

2CH 48kHz 16bit 2CH 48kHz 384kbps ISO/IEC 11172-3

Video

50Mbps(CAVLC) 30Mbps(CABAC) 50Mbps(CAVLC) 30Mbps(CABAC) 50Mbps(CAVLC) 20Mbps(CABAC)

Sampling Frquency

720×480/59.94i

720×576/50i 1280×720/50p,59.94p 1440×1080/50i,59.94i 1920×1080/50i,59.94i

720×480/59.94i

1280×720/50p,59.94p 1440×1080/50i,59.94i 1920×1080/50i,59.94i

Quantize bit no./ Bit rate Remarks

Audio

LPCM

MPEG-1 Audio

LayerⅡ(MP2)

Dolby Digital

LPCM

MPEG-1 Audio

LayerⅡ(MP2)

Dolby Digital

AAC

LC)

Conforms to SMPTE

AAC(MPEG-4 AAC LC)

Dolby Digital

2CH 48kHz 448kbps 2CH 48kHz 288kbps ISO/IEC 14496-3

Implementation kit

Encoder setting item and set value

No.

Intel Xenon, Core 2 (Duo, Quad , Extreme), 7i ,5i , 3i

Set value of test program

Pioneer

OPEN/CLOSED

GOP

Sampling rate 48KHz

(for Japan and

for Pioneer HD-V9000

Content File Name Encorder System Name

PC CPU

CPU Clock __________________ GHz PC Memory _________________ GB RAM

OS Windows Xp ,Vista 64Bit / 32Bit

Mac OS ( _________________________ )

Parameter item

Multiplex Type :MPEG2 Transport Stream Profile@Level :HP@L4.1

H.264/AVC

Frame Rate

29.97fps

North

America)

Normal

HD

Parameter

Frame Size :1920*1080i Frame Rate :29.97fps Video Bitrate CBR/VBR :CBR entropy coding :CABAC

Keyframe Interval :15 Sequence Par Set :Per IDR

Audio

/ /

AMD Phenom / Athlon ( )

operation conducted by

:30Mbps

:CLOSED GOP

:MPEG1-Layer2 224kbps

Your setting

Note

Pioneer Corp. [01]