SEV-9-V
Front
Center
Surround
SPEAKER SYSTEM
S-EV9V XJM/E
S-EV9V XJM/NC
Subwoofer
ORDER NO.
RRV3423
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.1 FRONT and SURROUND SPEAKER
The grille assy is attached to the cosmetic baffle by catches.
Detach by pulling it toward you.
The catch is attached to the cosmetic baffle by press-fitting. To
detach it, insert a sharp-pointed tool like an eyeleteer into each
of side. To re-attach it, insert the holes of the cosmetic baffle
assy by press-fitting.
The cosmetic baffle is attached to the inner baffle by its bosses.
To detach it, pry it open by inserting a flat blade screwdriver
into lower side.
The woofer is attached to the inner baffle by 4 screws with the
screw heads facing the baffle. To detach it, first remove the cosmetic baffle, next disconnect the cord to tweeter. Then unfasten
those screws. When re-attaching it, face its terminal upward.
The tweeter is attached to the cosmetic baffle by 2 internal
screws. To detach it, first remove the cosmetic baffle, next disconnect the cord to tweeter. Then unfasten those screws. When
re-attaching it, face its terminal downward.
1.2 CENTER SPEAKER
The grille assy is attached to the cabinet by 8 external screws.
To detach it, unfasten those screws. When re-attaching it, the
connection cord should pass along the back side of the speaker
unit.
The speaker unit is attached to the grille by 4 internal screws.
To detach it, first remove the grille assy. Next unfasten those
screws, and remove the cable. When re-attaching it, face its terminal leftward. (See to the backside of the grille assy.)
1.3 SUBWOOFER
The cosmetic baffle is attached to the cabinet by its bosses. To
detach it, pry it open by inserting a flat blade screwdriver into
lower slot. To attach it, clean the press-fitting part and apply a
bit of adhesive . Then press it to the baffle.
The woofer is attached to the back board of cabinet by 4 external screws. To detach it, unfasten those screws. When re-attaching it, face its terminal upward.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
T – ZZS JUNE 2006 Printed in Japan
1
N
23
2. EXPLODED VIEWS AND PARTS LIST
4
A
OTES:
2.1 PACKING
B
C
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
9, 14
10
12
7
16
1
2
8
15
6
16
8
6
15
17
11
3
4
5
7
D
PACKING Parts List
Mark No. Description Part No.
NSP 1 Front Speaker (L) SMW1955
E
NSP 2 Front Speaker (R) SMW1956
NSP 3 Center Speaker SMW1957
NSP 4 Surround Speaker (L) SMW1961
NSP 5 Surround Speaker (R) SMW1962
NSP 6 Subwoofer SMW1963
7 Protection Sheet S2 SHC1826
8 Protection Sheet S4 SHC1827
9 Speaker Cord (for Subwoofer) 439929113167
10 Top Protector 439929364106
13
18
Mark No. Description Part No.
11 Bottom Protector 439929364107
12 Top Protector 439929364108
13 Bottom Protector 439929364109
14 Non Skid Pad 439929484271
NSP 15 Polyethylene Bag S5 SHL1430
NSP 16 Polyethylene Bag S7 SHL1434
NSP 17 Polyethylene Bag S4 SHL1433
for XJM/E type
18 Packing Case 439929334126
for XJM/NC type
18 Packing Case 439929334138
F
2
1234
S-EV9V
Loading...