Pioneer SEV-66-V Service manual
FrontSub Woofer
Surround
Center
S-EV66V
SPEAKER SYSTEM
S-EV66V XJI/E
S-EV66V XJI/NC
S-EV66V XJI/CN
ORDER NO.
RRV3001
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
T – ZZE JULY 2004 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
(Front SP)
The grille is attached to the cabinet by catches. Detach by pulling it toward you.
The woofer is attached to the cosmetic baffle by 4 internal
screws. The cosmetic baffle is atached to the cabinet by 4 external screws and. To detach it, first insert a sharp-pointed tool
like an eyeleteer into the catch and push up. Next unfasten
screws for the cosmetic baffle. Then unfasten those screws.
When attaching the woofer, face its terminal downward. When
attaching the cosmetic baffle on the cabinet by screws.
4. Reassemble the subwoofer, as shown below:
4-1 Apply adhesive to the cosmetic baffle and press it into the
cabinet.
4-2 Apply adhesive to the interior surface of the circumfer-
ence of the damper previously removed.
4-3 Insert the damper into the cabinet through the hole where
the speaker was, and adhere it so that the end of the cosmetic duct is on the same plane as the surface of the
damper.
4-4 Secure the speaker to the cabinet with the four screws pre-
viously removed.
The tweeter is attached to the cosmetic baffle by 2 internal
screws. The cosmetic baffle is atached to the cabinet by 4 external screws. To detach it, perform same as the woofer.
(Sub Woofer)
The woofer is attached to the back board by 4 external screws.
To detach it, unfasten those screws.
The input terminal is attached to the back board of the cabinet
together with the adhesive by press-fitting. To detach the input
terminal, pry it open by inserting a flat blade screwdriver into
the upper and lower slot of the input terminal. To attach the
input terminal, replace it on the back board of the cabinet correctly together with the adhesive by press-fitting. (The red terminal is right-side.)
The cosmetic baffle is attached to the baffle of the cabinet together with the adhesive by press-fitting. To detach the cosmetic baffle, pry it open by inserting a flat blade screwdriver
into the lower slot of it. To attach the cosmetic baffle, replace it
on the baffle of the cabinet together with the adhesive by pressfitting.
(Center SP and Surround SP)
The grille assy is attached to the cabinet by external screws (8
screws for center SP, 4 screws for surround SP) from backside.
The Speaker is attached to the grille by 4 internal screws. To
detach it, first unfasten screws for the grille and the cabinet.
Then unfasten those screws.When attaching it, face its terminal
horizontal. When attaching the grille after connecting the cord,
face its terminal toward the cord of the cabinet.
How to replace the cosmetic baffle and cosmetic duct
1. Remove the speaker from the cabinet, first removing the four
screws.
2. Reach through the hole where the speaker was originally located and pull out the damper attached at the end of the cosmetic duct by hand. (Damper: See Product Appearance 11.)
Note: Detach the damper with great care so as not to damage
the interior surface of its circumference.
3. With the aid of a flathead screwdriver inserted through the slit
at the lower part of the cosmetic baffle, remove the cosmetic
baffle from the cabinet.
1
N
PARTS LIST
OTES:
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
234
A
Mark No. Description Part No.
NSP CS Assy (Front L) SMW1849
NSP CS Assy (Front R) SMW1850
NSP CS Assy (Sub Woofer) SMW1853
NSP CS Assy (Center SP) SMW1854
NSP CS Assy (Surround L) SMW1855
NSP CS Assy (Surround R) SMW1856
for Accessory
Stand SNK2684
Spacer SEC1737
NSP Accessories Set SME3448
NSP Polyethylene Bag S1 KHL1079
Speaker Cord SDS1147
Non Skid Pad SEP1273
for XJI/E type
NSP Stamped Label (L) SME3497
NSP Model Label (Front L) SAN3458
NSP Stamped Label (R) SME3498
NSP Model Label (Front R) SAN3459
NSP Stamped Label SME3499
NSP Model Label (Sub WF) SAN3460
NSP Stamped Label SME3500
NSP Model Label (Center) SAN3461
NSP Stamped Label (L) SME3501
NSP Model Label (Sur.L) SAN3462
NSP Stamped Label (R) SME3502
NSP Model Label (Sur.R) SAN3463
NSP Caution Label SRW1091
for XJI/NC type
NSP Stamped Label (L) SME3576
NSP Model Label (Front L) SAN3522
NSP Stamped Label (R) SME3577
NSP Model Label (Front R) SAN3523
NSP Stamped Label SME3578
NSP Model Label (Sub WF) SAN3524
NSP Stamped Label SME3579
NSP Model Label (Center) SAN3525
NSP Stamped Label (L) SME3580
NSP Model Label (Sur.L) SAN3526
NSP Stamped Label (R) SME3581
NSP Model Label (Sur.R) SAN3527
NSP Caution Label SRW1091
for XJI/CN type
NSP Stamped Label (L) SME3582
NSP Model Label (Front L) SAN3528
NSP Stamped Label (R) SME3583
NSP Model Label (Front R) SAN3529
NSP Stamped Label SME3584
NSP Model Label (Sub WF) SAN3530
NSP Stamped Label SME3585
NSP Model Label (Center) SAN3531
NSP Stamped Label (L) SME3586
NSP Model Label (Sur.L) SAN3532
NSP Stamped Label (R) SME3587
NSP Model Label (Sur.R) SAN3533
NSP Caution Label SRW1110
Mark No. Description Part No.
for Packing
Top Protector SHA2384
Middle Protector SHA2385
Bottom Protector SHA2407
Protection sheet S2 (for Front) SHC1800
Protection sheet S3 (for Sub WF) SHC1801
Packing Case (for XJI/E type)SHG2594
Packing Case (for XJI/NC type)SHG2601
Packing Case (for XJI/CN type)SHG2602
NSP
NSP
77
7
77
CS Assy (Front SP)
Polyethylene Bag S5 (for Front and Sub WF)
Polyethylene Bag (for Center and Stand)
Polyethylene Bag S3 (for Surround) SHL1397
Mark No. Description Part No.
NSP Cabinet SMM2006
NSP Badge 36 SAM1441
NSP Grille Frame SMH1089
NSP Punching net SNC1204
NSP Double Face tape SEH1062
NSP Acoustic Absorbent SMV2207
NSP Acoustic Absorbent SMV1886
77
7
77
CS Assy (Sub Woofer)
Grille Assy SMG1826
Network Assy (Front L) SWN1716
Network Assy (Front R) SWN1717
Non Skid Pad SEC1827
Gasket SEC1629
Packing SEC1726
Catch SNK2176
Cosmetic Baffle SNK2803
Speaker (Woofer) A14LU75-51D
Speaker (Tweeter) E52AP45-55D
Screw (for Speaker) BPZ40P100FNI
Screw (for Cosmetic Baffle) PYC40P400FNI
Mark No. Description Part No.
NSP Cabinet SMM2008
NSP Packing SEC1535
NSP Duct 48 SMR1369
NSP Acoustic Absorbent SMV1886
NSP Cosmetic Board (Top) SNK2686
NSP Cosmetic Board (Under) SNK2687
Input Terminal KKX1014
Connection Cord SDD1317
Non Skid Pad SEC1827
Cosmetic Baffle SNK2683
Speaker Q13LR82-51D
Screw (for Speaker) BYC40P200FNI
SHL1385
SHL1405
B
C
D
E
F
1
2
S-EV66V
3
4
3
Loading...