Pioneer K020, K019 User Manual

Important Information for the User

FLASH MEMORY MULTIMEDIA AV NAVIGATION
RECEIVER

AVIC-F900BT
AVIC-F700BT
AVIC-F7010BT
AVIC-F90BT

Be sure to read this leaflet first! This manual includes
the important information that you must understand
before using this navigation system.

Notice to all users:

This software requires that the navigation system is
properly connected to your vehicle’s parking brake and
depending on your vehicle, additional installation may
be required. For more information, please contact your
Authorized Pioneer Electronics retailer or call us at
[phone].

English

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU
TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: [phone]

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: [phone]

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936
TEL: [phone]

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: [phone]

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: [phone]
TEL: [phone]

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL:[phone]

先鋒股份有限公司

總公司 : 台北市中山北路二段44號13樓

電話 : [phone]

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心9樓901-6室

電話 : [phone]

Published byPioneer Corporation.
Copyright © 2008 by Pioneer Corporation.
All rights reserved.

<KKYZX> <08E00000>

Printed in China

<CRB2686-B/S> UC

Precaution

Information to User

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer­ence, and (2) this device must accept any inter­ference received, including interference that
may cause undesired operation.

Alteration or modifications carried out without
appropriate authorization may invalidate the
user’s right to operate the equipment.

! FCC ID : AJDK020

MODEL NO. : AVIC-F900BT, AVIC-F90BT
IC : 775E-K020

! FCC ID : AJDK019

MODEL NO. : AVIC-F700BT, AVIC-F7010BT
IC : 775E-K019

! This device complies with Part 15 of FCC

Rules and RSS-Gen of IC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause interference,
and (2) this device must accept any interfer­ence, including interference that may
cause undesired operation of this device.
MADE IN CHINA

For Canadian model

This Class B digital apparatus complies with
Canadian ICES-003.

This transmitter must not be co-located or op­erated in conjunction with any other antenna
or transmitter.

This equipment complies with FCC radiation
exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to
OET65. This equipment has very low levels of
RF energy that it deemed to comply without
maximum permissive exposure evaluation
(MPE). But it is desirable that it should be in­stalled and operated with at least 20cm and
more between the radiator and person’s body
(excluding extremities: hands, wrists, feet and
ankles).

CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PER­FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH
THIS PRODUCT WILL INCREASE EYE HA­ZARD.

WARNING

Handling the cord on this product or cords asso­ciated with accessories sold with the product
may expose you to chemicals listed on proposi­tion 65 known to the State of California and other
governmental entities to cause cancer and birth
defects or other reproductive harm. Wash hands

after handling.

This product contains mercury. Dis­posal of this material may be regu­lated due to environmental
considerations. For disposal or recy­cling information, please contact
your local auth orities or the Electro­nics Industries Alliance:

www.eiae.org

En

Precaution License Agreement

The backlighting lamp of LCD in this
equipment contains mercury. Dispo­sal of this material may be regulated
due to environmental considerations
according to Local, State or Federal
Laws. For disposal or recycling infor­mation, please contact your local
authorities or the Electronics Indus­tries Alliance:
www.eiae.org

PIONEER AVIC-F900BT, AVIC­F700BT, AVIC-F7010BT, AVIC­F90BT - for U.S.A.

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS (USA) INC. (“PIONEER”).
PLEASE READ THE TERMS AND CONDI­TIONS OF THIS AGREEMENT CAREFULLY BE­FORE USING THE SOFTWARE INSTALLED ON
THE PIONEER PRODUCTS. BY USING THE
SOFTWARE INSTALLED ON THE PIONEER
PRODUCTS, YOU AGREE TO BE BOUND BY
THE TERMS OF THIS AGREEMENT. THE SOFT­WARE INCLUDES A DATABASE LICENSED BY
THIRD PARTY SUPPLIER( S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV­ERED BY THE SUPPLIERS’ SEPARATE
TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (Refer to Terms and Conditions
for the Tele Atlas Data). IF YOU DO NOT AGREE
WITH ALL OF THESE TERMS, PLEASE RE­TURN THE PIONEER PRODUCTS (INCLUDING
THE SOFTWARE, AND ANY WRITTEN MATERI­ALS) WITHIN FIVE (5) DAYS OF RECEIPT OF
THE PRODUCTS, TO THE AUTHORIZED
PIONEER DEALER FROM WHICH YOU PUR­CHASED THEM. USE OF THE SOFTWARE
SHALL BE DEEMED TO BE YOUR CONSENT
TO THE LICENSE AGREEMENT.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.

En

License Agreement

You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this
agreement. You shall not derive or attempt to
derive the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per­sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cense Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY FOR THE SOFT­WARE, WHETHER EXPRESS OR IMPLIED,
AND ALL WARRANTIES OF MERCHANTABIL­ITY AND FITNESS FOR ANY PARTICULAR
PURPOSE FOR THE SOFTWARE ARE EX­PRESSLY EXCLUDED. SOME STATES DO NOT
ALLOW EXCLUSION OF IMPLIED WARRAN­TIES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. The Software is complex and
may contain some nonconformities, defects or

errors. Pioneer does not warrant that the Soft­ware will meet your needs or expectations,
that operation of the Software will be error free
or uninterrupted, or that all non-conformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warran­ties regarding the use or results of the use of
the Software in terms of its accuracy, reliability
or otherwise.

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
INCOME, LOST SALES OR BUSINESS, EXPEN­DITURES, INVESTMENTS, OR COMMITMENTS
IN CONNECTION WITH ANY BUSINESS, LOSS
OF ANY GOODWILL, OR DAMAGES) RESULT­ING FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ANY AND ALL CAUSES OF ACTION INDIVI­DUALLY OR IN THE AGGREGATE, INCLUDING
WITHOUT LIMITATION BREACH OF CON­TRACT, BREACH OF WARRANTY, NEGLI­GENCE, STRICT LIABILITY,
MISREPRESENTATION, AND OTHER TORTS.
IF PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50%) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.

En

License Agreement

Some states do not allow the exclusion or lim­itation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that they are prohibited by
any applicable federal, state or local law which
provides that such a disclaimer or limitation
cannot be waived or preempted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside the United States except as
authorized and as permitted by the laws and
regulations of the United States. If the Soft­ware has been rightfully obtained by you out­side of the United States, you agree that you
will not re-export the Software nor any other
technical data received from Pioneer, nor the
direct product thereof, except as permitted by
the laws and regulations of the United States
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

Inc., 2265 East 220th Street, Long Beach, CA

90810.

7 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. Pioneer
retailers do not have the authority to change
this Agreement. This Agreement shall be gov­erned by and construed in accordance with
the internal laws of the State of California. If
any provision of this Agreement is declared in­valid or unenforceable, the remaining provi­sions of this Agreement shall remain in full
force and effect.

6 U.S. GOVERNMENT END USERS

If the Software is being acquired by or on be­half of the United States government or any
other entity seeking or applying rights similar
to those customarily claimed by the United
States government, the Data is licensed with
“Limited Rights”. Utilization of the Software is
subject to the restrictions specified in the
“Rights in Technical Data” clause at DFARS

252.227-7013, or the equivalent clause for non­defense agencies. Pioneer Electronics (USA)

En

License Agreement

PIONEER AVIC-F900BT, AVIC­F700BT, AVIC-F7010BT, AVIC­F90BT - for Canada

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS OF CANADA, INC.
(“PIONEER”). PLEASE READ THE TERMS AND
CONDITIONS OF THIS AGREEMENT CARE­FULLY BEFORE USING THE SOFTWARE IN­STALLED ON THE PIONEER PRODUCTS. BY
USING THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS, YOU AGREE TO BE
BOUND BY THE TERMS OF THIS AGREE­MENT. THE SOFTWARE INCLUDES A DATA­BASE LICENSED BY THIRD PARTY SUPPLIER
(S) (“SUPPLIERS”), AND YOUR USE OF THE
DATABASE IS COVERED BY THE SUPPLIERS’
SEPARATE TERMS, WHICH ARE ATTACHED
TO THIS AGREEMENT (Refer to Terms and
Conditions for the Tele Atlas Data). IF YOU DO
NOT AGREE WITH ALL OF THESE TERMS,
PLEASE RETURN THE PIONEER PRODUCTS
(INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS
OF RECEIPT OF THE PRODUCTS, TO THE
AUTHORIZED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM. USE OF
THE SOFTWARE SHALL BE DEEMED TO BE
YOUR CONSENT TO THE LICENSE AGREE­MENT.

agreement. You shall not derive, or attempt to
derive, the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per­sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cense Agreement.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this

En