Pioneer DVR-S201 User Manual

DVD-R DRIVE

Version: 1.9

DVR-S201

Operating Instructions

This product complies with the Low Voltage Directive (73/ 23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).

Ce produit est conforme à la directive relative aux appareils basse tension (73/23/CEE), aux directives relatives à la compatibilité électromagnétique (89/336/CEE, 92/31/CEE) et à la directive CE relative aux marquages (93/68/CEE).

IMPORTANT

The accessory power cord can only be used on the continent of North America. In Europe, do not use the accessory power cord. Consult with the company sales representative. “Use Only Safety Licensed Power Cord.“

A certified power cord is to be used with this equipment. For a rated current up to 6 A, a type not lighter than H05VVF3G 0.75 mm2 or H05VVH2-F 3G 0.75 mm2 shall be used.

Dieses Produkt entspricht den Niederspannungsrichtlinien (73/23/EEC),EMC -Richtlinien (89/336/EEC,92/31/EEC) und den CE-Markierungsrichtlinien (93/68/EEC).

Questo prodotto è conforme alla direttiva sul basso voltaggio (73/23/CEE),alle direttive EMC (89/336/CEE,92/31/CEE) e alla direttiva sul marchio CE (93/68/CEE).

Dit produkt voldoet aan de eisen m.b.t laag voltage (73/23/ EEC),elektro-magnetisme (89/336/EEC,92/31/EEC) en CE markering richtlijnen (93/68/EEC).

Denna produkt uppfyller föreskrifterna i Lågspänningsdirektiv (73/23/EEC), EMC-direktiv (89/336/EEC,92/31/EEC) och CEmärkningsdirektiv (93/68/EEC).

Este producto cumple con la Directiva de Bajo Voltaje (73/23/ CEE), Directivas EMC (89/336/CEE,92/31/CEE) y Directiva de Marcación CE (93/68/CEE).

Este produto cumpre com a Directiva de Voltagem Baixa (73/ 23/CEE), Directivas EMC (89/336/CEE,92/31/CEE) e com a Directiva da Marcação CE (93/68/CEE).

Dette produkt er i overensstemmelse med direktivet vedrørende lavspænding (73/23/EEC), direktiverne vedrørende elektromagnetisk kompatibilitet (89/336/EEC, 92/31/EEC) og CE-direktivet vedrørende opmærkning (93/68/EEC).

For pluggable Equipment, The Socket-Outlet Shall Be Installed Near The Equipment and Shall Be Easily Accessible.

Pour les appareils enfichables, la prise doit être installée à proximité et aisément accessible.

Zur vollständigen Trennung vom Netz, bitte den Netzstecker aus der Steckdoes ziehen. Die Steckdoes muß nahe dem Gerät angebracht und leicht zugänglich sein.

The Generation of Acoustical Noise Is Less Than 70dB. (ISO7779/DIN45635)

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

CAUTION:

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

VARNING!

Om apparaten används på annat sätt än i denna bruksanvisning spacificerats, kan användaren utsättas för osynling laserstrålning som överskrider gränsen för laserklass 1.

ADVARSEL:

Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå udsaettelse for stråling.

VAROITUS!

Laitten käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käuttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

<DRC1101> En

For U.S. model

INFORMATION COMPLYING DHHS RULES IS MARKED ON THE TOP COVER AS FOLLOWS:

CAUTION - EXPOSURE TO LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However, the method of connecting and operating the unit is the same.

This drive may be used as a personal computer’s peripheral SCSI device. Note that the use of the DVD format makes it possible to record and replay large amounts of data.

7 CONTENTS

INSTALLATION-RELATED PRECAUTIONS ....... 5

PRIOR TO USING THIS PRODUCT ................... 5

Confirm that you have received the following

accessories ..........................................................5

Usage Precautions ............................................... 6

PART NAMES AND FUNCTIONS ...................... 7

CONNECTION.................................................... 8

OPERATION ..................................................... 10

OTHER USEFUL INFORMATION .................... 12

Troubleshooting ................................................ 12

Routine Upkeep ................................................ 12

DVD-R Discs ..................................................... 12

Specifications.................................................... 13

English

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT NOTICE :

RECORD THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT BELOW. THE NUMBERS ARE ON THE REAR PANEL. MODEL NO. DVR-S201 ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ SERIAL NO. ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ KEEP THESE NUMBERS FOR FUTURE USE.

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT! SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS – All the safety and operating

instructions should be read before the appliance is operated.

2. RETAIN INSTRUCTIONS – The safety and operating

instructions should be retained for future reference.

3. HEED WARNINGS – All warnings on the appliance and in

the instructions should be adhered to.

4. FOLLOW INSTRUCTIONS – All operating and use

instructions should be followed.

5. CLEANING – Unplug this product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. WATER AND MOISTURE – Do not use this product near

water.

7. ACCESSORIES – Do not place this product on an unstable

cart, stand, or table. The product may fall and be seriously damaged.

8. VENTILATION – Slots and openings in the cabinet and

back or bottom are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. They should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed in a built-in installation unless proper ventilation is provided.

9. POWER SOURCES – This product should be operated

only from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

10. PLUG – This product is equipped with a wired grounding

type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

11. POWER-CORD PROTECTION – When unplugging the

apparatus, pull on the plug - not on the cord. Do not handle the cord or plug with wet hands. Doing so could cause an electric short or shock. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.

12. OVERLOADING – Do not overload wall outlets and

extension cords as this can result in a fire or electric shock.

13. OBJECT AND LIQUID ENTRY – Never push objects of

any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

14. CONDENSATION – Moisture will form in the operating

section of the product and the product’s performance will be impaired if the product is brought from cool surroundings into a warm room or if the room temperature rises suddenly. To prevent this, let the product stand in its new surroundings for about an hour or two before switching it on, or ensure that the room temperature rises gradually.

15. SERVICING – Do not attempt to service this product

yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

16. DAMAGE REQUIRING SERVICE – Unplug this product

from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power cord or plug is damaged. b. If liquid has been spilled, or objects have fallen

into the product.

c. If the product has been exposed to rain or

water.

d. If the product does not operate normally when

the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or the cabinet

has been damaged.

f. When the product exhibits a distinct change in

performance - this indicates a need for service.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARDS.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

[For European and U.K. models]

The following caution label appears on your unit.

Location: bonnet of the unit.

CAUTION

This product contains a laser diode of a higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of this product. Refer all servicing to qualified personnel.

CLASS1 LASER PRODUCT LASER KLASSE 1

DRW1866

[For Korean model]

Class A equipment

<DRC1101> En

Note that this product has passed the electromagnetic interference test as business-use equipment. If you should mistakenly purchase or sell this product for non business use, be sure to replace it with another non business use model.

To the users or dealers:

INSTALLATION-RELATED PRECAUTIONS

7 Operating Environment:

÷ Operating Temperature Range: +5 °C to +30 °C ÷ Operating Humidity Range: 10 % to 80 %

(with no condensation)

7 Installation Locations:

÷ Avoid exposure to direct sunlight or strong lighting ÷ Prefer dust-free and minimal vibration sites ÷ Away from strong electrolytes or strong magnetic

fields

÷ Seek moderate temperature areas ÷ Eliminate high electrical/white ‘noise’ or locations which

easily generate static noise

7 Operating Precautions:

÷ Maintain a cleared area around the air intake vent to

prevent the internal temperature of the drive from rising

÷ Place the drive on a stable, level surface ÷ Avoid placing objects on top of the drive ÷ Run the drive only in the horizontal position

7 Transportation Requirements:

÷ Remove any discs before turning the drive off ÷ Unplug all cords only after the drive is turned off ÷ Avoid causing vibration or shock to the drive ÷ Protect the drive from excessive heat or liquids ÷ Transport the drive using the original packing materials

only

PRIOR TO USING THIS PRODUCT

English

Confirm that you have received the following accessories

(quantities are indicated in parentheses)

North America

÷ Power cord (1)

÷ Application software disk (1) ÷ Pin for emergency ejection (1)

÷ Operating Instructions (1) ÷ Replacement filters (1 package of 5 filters) (1)

Japan*

÷ Power cord (1) ÷ Converter plug (1)

* The converter plug is for the power cord designed for use

in Japan; do not use it outside of Japan.

Contact your dealer if any of these accessories are missing.

+ 9 hidden pages