How it Works
Pioneer
Loading...
DEH-P7500MP
User Manual
128 pgs1.31 Mb0
User manual [el]
44 pgs1.32 Mb0
User Manual [ru]
44 pgs774.3 Kb0
User manual
128 pgs2.91 Mb0
Service manual
81 pgs7.94 Mb0
User manual [fi]
44 pgs993.44 Kb0
User Manual [en, de, es, fr, it]
8 pgs228.36 Kb0
Service Manual
93 pgs7.72 Mb0
User manual
136 pgs1.38 Mb0
User manual
140 pgs1.42 Mb0

Pioneer DEH P7500MP User Manual

Operation Manual Manual de instrucciones
Multi-CD/DAB control High power CD/MP3/WMA player with RDS tuner
Reproductor de CD/MP3/WMA de alta potencia con sintonizador RDS y control de CD múltiple/DAB
DEH-P7500MP
English Español
Contents
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this unit 5 About this manual 5 Precautions 5 In case of trouble 5 Features 5 About WMA 6 Protecting your unit from theft 6
Removing the front panel 6
Attaching the front panel 7
About the demo mode 7
Reverse mode 7
Feature demo 7
About the operation mode 7
Whats What
Head unit 8 Optional remote control 9
Power ON/OFF
Turning the unit on 10 Selecting a source 10 Turning the unit off 10
Tuner
Listening to the radio 11 Introduction of advanced tuner
operation 12
Storing and recalling broadcast
frequencies 12 Tuning in strong signals 12 Storing the strongest broadcast
frequencies 13
RDS
Introduction of RDS operation 14 Switching the RDS display 14 Selecting alternative frequencies 15
Using PI Seek 15
Using Auto PI Seek for preset stations 15
Limiting stations to regional
programming 15 Receiving traffic announcements 16 Using PTY functions 16
Searching for an RDS station by PTY
information 16
Using news program interruption 17
Receiving PTY alarm broadcasts 17 Using radio text 17
Displaying radio text 17
Storing and recalling radio text 18 PTY list 19
Built-in CD Player
Playing a CD 20 Introduction of advanced built-in CD player
operation 21 Repeating play 21 Playing tracks in a random order 21 Scanning tracks of a CD 21 Pausing CD playback 22 Selecting the search method 22 Searching every 10 track in the current
disc 22 Using disc title functions 23
Entering disc titles 23
Displaying disc titles 23
Using CD TEXT functions 24
Displaying titles on CD TEXT discs 24
Scrolling titles in the display 24
MP3/WMA Player
Playing a MP3/WMA 25 Introduction of advanced built-in CD player
(MP3/WMA) operation 26 Repeating play 26
2
En
Contents
English
Playing tracks in a random order 27 Scanning folders and tracks 27 Pausing MP3/WMA playback 27 Selecting folders from the folder title list 28 Selecting the search method 28 Searching every 10 track in the current
folder 28 Switching the tag display 29 Displaying text information on MP3/WMA
disc 29 Scrolling text information in the display 29
Multi-CD Player
Playing a CD 30 50-disc multi-CD player 30 Introduction of advanced multi-CD player
operation 31 Repeating play 31 Playing tracks in a random order 31 Scanning CDs and tracks 32 Pausing CD playback 32 Using ITS playlists 32
Creating a playlist with ITS programming 32
Playback from your ITS playlist 33
Erasing a track from your ITS playlist 33
Erasing a CD from your ITS playlist 33
Using disc title functions 34
Entering disc titles 34
Displaying disc titles 35
Selecting discs from the disc title list 35
Using CD TEXT functions 35
Displaying titles on CD TEXT discs 35
Scrolling titles in the display 35
Using compression and bass emphasis 36
Audio Adjustments
Introduction of audio adjustments 37 Compensating for equalizer curves (EQ-
EX) 37
Setting the sound focus equalizer
(SFEQ) 37 Using balance adjustment 38 Using the equalizer 38
Recalling equalizer curves 38
Adjusting equalizer curves 39
Fine adjusting equalizer curve 39
Adjusting bass and treble 40
Adjusting bass and treble level 40
Selecting bass frequency 40
Selecting treble frequency 40 Adjusting loudness 41 Using subwoofer output 41
Adjusting subwoofer settings 41 Using non fading output 41
Adjusting non fading output level 42 Using the high pass filter 42 Adjusting source levels 42 Using automatic sound levelizer 43
Initial Settings
Adjusting initial settings 44 Setting the clock 44 Setting the FM tuning step 44 Switching Auto PI Seek 45 Switching the warning tone 45 Switching the auxiliary setting 45 Switching the dimmer setting 45 Adjusting the brightness 45 Selecting the illumination color 46 Setting the rear output and subwoofer
controller 46 Switching the handsfree telephoning 47 Switching the telephone muting/
attenuation 47
En
3
Contents
Switching the telephone standby 47 Switching the motion screen 47
Other Functions Using the operation mode 2 48
Tuner 48
Built-in CD player 48
MP3/WMA and Multi-CD player 48
DAB 48
Television 49
DVD player and Muti-DVD player 49
Using the AUX source 49
Selecting AUX as the source 49
Setting the AUX title 49
Using the telephone muting/attenuation and
handsfree telephoning function 50
Telephone muting/attenuation function 50
Handsfree telephoning function 50 Using different entertainment displays 50 Rewriting the entertainment displays 50 Introduction of DAB operation 52
Operation 52
Changing the label 52
Operating announcements with the
function menu 52
Available PTY function 53
Using dynamic label 53 Introduction of DVD operation 54
Operation 54
Function menu switching 54
Using ITS playlist and disc title
functions 54
CD player and care 55 CD-R/CD-RW discs 56 MP3 and WMA files 56
MP3 additional information 57
WMA additional information 57 About folders and MP3/WMA files 57 Terms 59 Specifications 60
Additional Information
Understanding built-in CD player error
messages 55
Understanding rewriting the entertainment
displays error messages 55
4
En
Before You Start
Section
01
About this unit
This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Di­rective (93/68/EEC).
The tuner frequencies on this unit are allo­cated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.
About this manual
This unit features a number of sophisticated functions ensuring superior reception and op­eration. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this productspo­tential and to maximize your listening enjoy­ment. We recommend that you familiarize yourself with the functions and their operation by read­ing through the manual before you begin using this unit. It is especially important that you read and observe precautions on this page and in other sections.
Precautions
! A CLASS 1 LASER PRODUCT label is af-
fixed to the bottom of this unit.
CLASS 1 LASER PRODUCT
! The Pioneer CarStereo-Pass is for use only
in Germany.
! Keep this manual handy as a reference for
operating procedures and precautions.
! Always keep the volume low enough so you
can hear sounds outside of the car.
! Protect this product from moisture. ! If the battery is disconnected or dis-
charged, the preset memory will be erased and must be reprogrammed.
In case of trouble
Should this product fail to operate properly, contact your dealer or nearest authorized Pio­neer Service Station.
Features
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
It is possible to play back MP3 files recorded on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/ Level 2 standard recordings). ! Supply of this product only conveys a li-
cense for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broad­casting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other net­works or in other electronic content distri­bution systems, such as pay-audio or audio-on-demand applications. An inde­pendent license for such use is required. For details, please visit http://www.mp3licensing.com.
English
En
5
Section
01
Before You Start
WMA file playback
It is possible to play back WMA files recorded on CD-ROM/CD-R/CD-RW (ISO9660 Level 1/ Level 2 standard recordings).
About WMA
The Windows Media" logo printed on the box indicates that this unit can playback the WMA data. WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7, 7.1 or Windows Media Player for Windows XP. Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Protecting your unit from theft
The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. ! If the front panel is not detached from the
head unit within five seconds of turning off the ignition, a warning tone will sound.
! You can turn off the warning tone. See
Switching the warning tone on page 45.
Important
! Never use force or grip the display and the
buttons tightly when removing or attaching.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and pull it gently outward.
Take care not to grip it tightly or to drop it.
Notes
! With some applications used to encode WMA
files, this unit may not operate correctly.
! With some applications used to encode WMA
files, album names and other text information may not be correctly displayed.
6
En
3 Put the front panel into the protective case provided for safe keeping.
Before You Start
Section
01
Attaching the front panel
% Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks.
About the demo mode
This unit features two demonstration modes. One is the reverse mode, the other is the fea­ture demo mode. ! You cannot cancel a demo mode when the
front panel is open.
Important
The red lead (ACC) of this unit should be con­nected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.
Feature demo
The feature demo automatically starts when power to this unit is turned off while the igni­tion switch is set to ACC or ON. Pressing 6 numbered button during feature demo opera­tion cancels the feature demo mode. Pressing 6 numbered button again to start the feature mode. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.
About the operation mode
This unit features two operation modes, opera­tion mode 1 and 2. Operation mode 1 enables you to operate all the functions of this unit. Operation mode 2 enables you to operate the basic functions for each source easily. This manual explains operation mode 1. Please refer to Using the operation mode 2 on page 48 for operation mode 2.
English
Reverse mode
If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing 5 numbered button when power to this unit is turned off while the igni­tion switch is set to ACC or ON cancels the re­verse mode. Pressing 5 numbered button again to start the reverse mode.
En
7
Section
02
Whats What
12
34 6
Head unit
1 TA button
Press to turn traffic announcements func­tion on or off.
2 VOLUME
When you press VOLUME, it extends out­ward so that it becomes easier to turn. To re­tract VOLUME, press it again. Rotate to increase or decrease the volume.
3 DISPLAY button
Press to select different displays.
5
7
8
9bace d
8 a/b/c/d buttons
Press to do manual seek tuning, fast for­ward, reverse and track search controls. Also used for controlling functions.
9 BAND button
Press to select among three FM and MW/ LW bands and cancel the control mode of functions.
a EQ-EX button
Press and hold to switch between EQ-EX and SFEQ functions. Press to operate each function.
4 TEXT button
Press to turn radio text function on or off.
5 FUNCTION button
Press to select functions.
6 AUDIO button
Press to select various sound quality con­trols.
7 OPEN button
Press to open the front panel.
8
En
b 16 buttons
Press for preset tuning and disc number search when using a multi-CD player.
c ENTERTAINMENT button
Press to change to the entertainment dis­play.
d EQ button
Press to select various equalizer curves.
e SOURCE button
This unit is turned on by selecting a source. Press to cycle through all of the available sources.
Whats What
Section
02
f
9
e
8
5
6
Optional remote control
The steering remote control CD-SR100 is sold separately.
Operation is the same as when using the but­ton on the head unit. See the explanation of the head unit about the operation of each but­ton with the exception of AT T, which is ex­plained below.
f ATT button
Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level.
g VOLUME button
Press to increase or decrease the volume.
English
g
En
9
Section
03
Power ON/OFF
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source the unit is turned on.
Selecting a source
You can select a source you want to listen to. To switch to the built-in CD player, load a disc in this unit (refer to page 20).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between the following sources:
DAB (Digital Audio Broadcasting)Tuner TelevisionDVD player/Multi-DVD player Built-in CD playerMulti-CD playerEx­ternal unit 1External unit 2AUXTele­phone
Notes
! In the following cases, the sound source will
not change: When a unit corresponding to each source
is not connected to this unit.
When no disc is set in this unit.When no disc is set in the DVD player.When no magazine is set in the multi-CD
player.
When no magazine is set in the multi-DVD
player.
When the AUX (auxiliary input) is set to off
(refer to page 45).
When the Telephone standby is set to off
(refer to page 47).
! External unit refers to a Pioneer product (such
as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two exter­nal units are connected, the allocation of
them to external unit 1 or external unit 2 is automatically set by this unit.
! When this units blue/white lead is connected
to the cars auto-antenna relay control term­inal, the cars antenna extends when this units source is turned on. To retract the an­tenna, turn the source off.
Turning the unit off
% Press SOURCE and hold until the unit turns off.
10
En
Tuner
Section
04
Listening to the radio
2
5
34
1
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. This units AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to page 15).
1 Stereo (ST) indicator
Shows that the frequency selected is being broadcast in stereo.
2 LOC indicator
Shows when local seek tuning is on.
3 Band indicator
Shows which band the radio is tuned to, MW, LW or FM.
3 Press BAND to select a band.
Press BAND until the desired band is dis­played, FM1, FM2, FM3 for FM or MW/LW.
4 To perform manual tuning, press c or d with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold c or d for about one second and release.
The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
# You can cancel seek tuning by pressing either c or d with a quick press. # If you press and hold c or d you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons.
English
4 Preset number indicator
Shows what preset has been selected.
5 Frequency indicator
Shows to which frequency the tuner is tuned.
1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
En
11
Section
04
Tuner
Introduction of advanced tuner operation
1
1 Function display
Shows the function status.
% Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch be­tween the following functions: BSM (best stations memory)Regional (re­gional)Local (local seek tuning)program type selection (PTY)TA (traffic announce­ment standby)AF (alternative frequencies search)News (news program interruption)
# To return to the frequency display, press BAND. # If MW/LW band is selected, you can only se­lect BSM or Local.
Note
If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.
Storing and recalling broadcast frequencies
If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button.
% When you find a frequency that you want to store in memory press a preset tuning button 16 and hold until the preset number stops flashing.
The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tun­ing button 16 the radio station frequency is recalled from memory.
Notes
! Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be stored in memory.
! You can also use a and b to recall radio sta-
tion frequencies assigned to preset tuning buttons 16.
Tuning in strong signals
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.
1 Press FUNCTION to select Local.
Press FUNCTION until Local appears in the display.
2 Press a to turn local seek tuning on.
Local seek sensitivity (e.g., Local 2) appears in the display.
3 Press c or d to set the sensitivity.
There are four levels of sensitivity for FM and two levels for MW/LW: FM: Local 1Local 2Local 3Local 4 MW/LW: Local 1Local 2 The Local 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.
12
En
Tuner
Section
04
4 When you want to return to normal seek tuning, press b to turn local seek tun­ing off. Local :OFF appears in the display.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automa­tically store the six strongest broadcast fre­quencies under preset tuning buttons 16 and once stored there you can tune in to those fre­quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the display.
2 Press a to turn BSM on. BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in order of their signal strength. When finished, BSM stops flashing.
# To cancel the storage process, press b.
English
Note
Storing broadcast frequencies with BSM may re­place broadcast frequencies you have saved using 16.
En
13
4
Section
05
RDS
Introduction of RDS operation
1
RDS (radio data system) is a system for provid­ing information along with FM broadcasts. This inaudible information provides such fea­tures as program service name, program type, traffic announcement standby and automatic tuning, intended to aid radio listeners in find­ing and tuning in to a desired station.
1 TXT indicator
Shows when the radio text is received.
2 NEWS indicator
Shows when the set news program is re­ceived.
3 TP indicator
Shows when a TP station is tuned in.
4 Program service name
Shows the name of broadcast program.
% Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch be­tween the following functions: BSM (best stations memory)Regional (re­gional)Local (local seek tuning)program type selection (PTY)TA (traffic announce­ment standby)AF (alternative frequencies search)News (news program interruption)
# To return to the frequency display, press BAND.
2
3
# If MW/LW band is selected, you can only se­lect BSM or Local.
Notes
! If you do not operate the function within about
30 seconds, the display is automatically re­turned to the frequency display.
! RDS service may not be provided by all sta-
tions.
! RDS functions like AF and TA are only active
when your radio is tuned to an RDS station.
Switching the RDS display
When you tune in an RDS station its program service name is displayed. If you want to know the frequency you can.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings: Program service namePTY information and frequencyDAB information (DAB informa­tion and program service name) PTY (program type ID code) information is listed on page 19.
# PTY information and the frequency of the cur­rent station appears on the display for eight sec­onds. # If a PTY code of zero is received from a station, display is blank. This indicates that the station has not defined its program contents. # If the signal is too weak for this unit to pick up the PTY code, the PTY information display is blank. # You can only switch to DAB information when a DAB tuner (GEX-P700DAB) is connected.
14
En
RDS
Section
05
Selecting alternative frequencies
If you are listening to a broadcast and the re­ception becomes weak or there are other pro­blems, the unit will automatically search for a different station in the same network which is broadcasting a stronger signal. ! AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis­play.
2 Press a to turn AF on. Press a and AF : ON is displayed.
3 Press b to turn AF off. Press b and AF :OFF is displayed.
Notes
! Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
! When you recall a preset station, the tuner
may update the preset station with a new fre­quency from the stations AF list. (This is only available when using presets on the FM1 or FM2 bands.) No preset number appears on the display if the RDS data for the station re­ceived differs from that for the originally stored station.
! Sound may be temporarily interrupted by an-
other program during a AF frequency search.
! AF can be turned on or off independently for
each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre­quency, or if you are listening to a broadcast and the reception becomes weak, the unit will automatically search for a different station with the same programming. During the search, PI SEEK is displayed and the output is
muted. The muting is discontinued after com­pletion of the PI Seek, whether or not a differ­ent station is found.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. ! The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 45.
Limiting stations to regional programming
When AF is used to automatically retune fre­quencies, the regional function limits the se­lection to stations broadcasting regional programs.
1 Press FUNCTION to select Regional.
Press FUNCTION until Regional appears in the display.
2 Press a to turn the regional function on. Press a and Regional : ON is displayed.
3 Press b to turn the regional function off. Press b and Regional :OFF is displayed.
Notes
! Regional programming and regional networks
are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).
! The preset number may disappear on the dis-
play if the tuner tunes in a regional station which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.
English
En
15
Section
05
RDS
Receiving traffic announcements
TA (traffic announcement standby) lets you re­ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta­tion that broadcasts traffic information) or an enhanced other networks TP station (a station carrying information which cross-references TP stations).
1 Tune in a TP or enhanced other net­works TP station.
When you are tuned into a TP or enhanced other networks TP station the TP indicator will light.
2 Press TA to turn traffic announcement standby on.
Press TA and TA ON appears in the display. The tuner will standby for traffic announce­ments.
# To turn traffic announcements standby off, press TA again.
3 Use VOLUME to adjust the TA volume when a traffic announcement begins.
Rotate to increase or decrease the volume. The newly set volume is stored in memory and recalled for subsequent traffic announce­ments.
4 Press TA while a traffic announcement is being received to cancel the announce­ment.
The tuner returns to the original source but re­mains in the standby mode until TA is pressed again.
# You can also cancel the announcement by pressing SOURCE, BAND, a, b, c or d while a traffic announcement is being received.
Notes
! You can also turn on or off TA function in the
menu that appears with the pressing of FUNCTION.
! The system switches back to the original
source following traffic announcement recep­tion.
! Only TP and enhanced other networks TP sta-
tions are tuned in during seek tuning or BSM when TA is on.
Using PTY functions
You can tune in a station by using PTY infor­mation.
Searching for an RDS station by PTY information
You can search for general types of broadcast­ing programs, such as those listed on page
19.
1 Press FUNCTION to select program type selection (PTY).
Press FUNCTION until program type appears in the display.
2 Press c or d to select a program type.
There are four program types:
News&InfPopularClassicsOthers
3 Press a to begin the search.
When you press a the program type name in the display begins to flash. The unit searches for a station broadcasting that program type. When a station is found its program service name is displayed.
# To cancel the search, press b.
16
En
RDS
Section
05
Notes
! The program of some stations may differ from
that indicated by the transmitted PTY.
! If no station is broadcasting the type of pro-
gram you searched for, Not Found is dis­played for about two seconds and then the tuner returns to the original station.
Using news program interruption
When a news program is broadcast from a PTY code news station the unit can switch from any station to the news broadcast sta­tion. When the news program ends, reception of the previous program resumes.
% Press TA and hold to turn on news pro­gram interruption.
Press TA until NEWS ON appears in the dis­play.
# To turn off news program interruption, press TA and hold until NEWS OFF appears in the dis- play. # A news program can be cancelled by pressing TA. # You can also cancel the news program by pressing SOURCE, BAND, a, b, c or d while a news program is being received.
Note
You can also turn on or off news program in the menu that appears with the pressing of FUNCTION.
Receiving PTY alarm broadcasts
PTY alarm is a special PTY code for announce­ments regarding emergencies such as natural disasters. When the tuner receives the radio alarm code, ALARM appears on the display and the volume adjusts to the TA volume. When the station stops broadcasting the
emergency announcement, the system re­turns to the previous source. ! An emergency announcement can be can-
celled by pressing TA.
! You can also cancel an emergency an-
nouncement by pressing SOURCE, BAND, a, b, c or d.
Using radio text
This tuner can display radio text data trans­mitted by RDS stations, such as station infor­mation, the name of the currently broadcast song and the name of the artist. ! The tuner automatically memorizes the
three latest radio text broadcasts received, replacing text from the least recent recep­tion with new text when it is received.
Displaying radio text
You can display the currently received radio text and the three most recent radio text.
1 Press TEXT to display radio text.
Radio text for the currently broadcasting sta­tion is displayed.
# You can cancel radio text display by pressing TEXT or BAND. # When no radio text is received, No Text is dis- played.
2 Press c or d to recall the three most re­cent radio text.
Pressing c or d switches between the current and the three radio text data displays.
# If there is no radio text data in memory the dis­play will not change.
3 Press a or b to scroll.
Press a to go to the beginning. Press b to scroll the radio text data.
English
En
17
Section
05
RDS
Storing and recalling radio text
You can store data from up to six radio text transmissions at buttons 16.
1 Display the radio text you want to store in memory.
Refer to Displaying radio text on the previous page.
2 Press any of 16 and hold to store the selected radio text.
The memory number will display and the se­lected radio text has been stored in memory. The next time you press the same 16 button in the radio text display the stored text is re­called from memory.
18
En
RDS
Section
05
PTY list
General Specific Type of program
News&Inf News News
Affairs Current affairs
Info General information and advice
Sport Sports
Weather Weather reports/meteorological information
Finance Stock market reports, commerce, trading, etc.
Popular Pop Mus Popular music
Rock Mus Contemporary modern music
Easy Mus Easy listening music
Oth Mus Non categorized music
Jazz Jazz
Country Country music
Nat Mus National music
Oldies Oldies music, golden oldies
Folk mus Folk music
Classics L. Class Light classical music
Classic Serious classical music
Others Educate Educational programs
Drama All radio plays and serials
Culture National or regional culture
Science Nature, science and technology
Varied Light entertainment
Children Childrens
Social Social affairs
Religion Religion affairs or services
Phone In Phone In
Touring Travel programs, not for announcements about traffic problems
Leisure Hobbies and recreational activities
Document Documentaries
English
En
19
Section
06
Built-in CD Player
Playing a CD
1
2
These are the basic steps necessary to play a CD with your built-in CD player. More ad­vanced CD operation is explained starting on the next page.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur­rent track.
1 Press OPEN to open the front panel.
CD loading slot appears.
# After a CD has been inserted, press SOURCE to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, press and hold c or d.
# If you select the search method to
ROUGH SEARCH, pressing and holding c or d enables you to search every ten track in the cur­rent disc. (Refer to Selecting the search method on page 22.)
6 To skip back or forward to another track, press c or d.
Pressing d skips to the start of the next track. Pressing c once skips to the start of the cur­rent track. Pressing again will skip to the pre­vious track.
Notes
! The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again.
! If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page
55.
EJECT button
# You can eject a CD by pressing EJECT. # To avoid a malfunction, make sure that no
metal object comes into contact with the term­inals when the front panel is open.
20
En
Built-in CD Player
Section
06
Introduction of advanced built-in CD player operation
1
1 Function display
Shows the function status.
% Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch be­tween the following functions:
Repeat (repeat play)Random (random play)Scan (scan play)Pause (pause)FF/REV (search method)Tag Read (tag display)
# To return to the playback display, press BAND.
Notes
! When playing audio data (CD-DA), it is not ef-
fective even if you turn Tag Read (tag display) on. (Refer to page 29.)
! If you do not operate the function within about
30 seconds, the display is automatically re­turned to the playback display.
3 Press b to turn repeat play off. Repeat :OFF appears in the display. The track
currently playing will continue to play and then play the next track.
Note
If you perform track search or fast forward/re­verse, repeat play is automatically cancelled.
Playing tracks in a random order
Random play lets you play back tracks on the CD in a random order.
1 Press FUNCTION to select Random.
Press FUNCTION until Random appears in the display.
2 Press a to turn random play on. Random : ON appears in the display. Tracks
will play in a random order.
3 Press b to turn random play off. Random :OFF appears in the display. Tracks
will continue to play in order.
English
Repeating play
Repeat play lets you hear the same track over again.
1 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the display.
2 Press a to turn repeat play on. Repeat : ON appears in the display. The track
currently playing will play and then repeat.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of each track on the CD.
1 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the display.
2 Press a to turn scan play on. Scan : ON appears in the display. The first 10
seconds of each track is played.
En
21
Section
06
Built-in CD Player
3 When you find the desired track press b to turn scan play off. Scan :OFF appears in the display. The track
will continue to play.
# If the display has automatically returned to the playback display, select Scan again by press­ing FUNCTION.
Note
After scanning of a CD is finished, normal play­back of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the CD.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the display.
2 Press a to turn pause on. Pause : ON appears in the display. Play of the
current track pauses.
3 Press b to turn pause off. Pause :OFF appears in the display. Play will re-
sume at the same point that you turned pause on.
Selecting the search method
You can switch the search method between fast forward/reverse and searching every 10 track.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the display.
# If the search method ROUGH SEARCH has been previously selected, ROUGH SEARCH will be displayed.
2 Press c or d to select the search meth­od.
Press c or d until the desired search method appears in the display.
! FF/REV Fast forward and reverse ! ROUGH SEARCH Searching every 10
track
Searching every 10 track in the current disc
If a disc contains over 10 tracks, you can search every 10 track. When a disc contains a lot of tracks, you can roughly search the track you want to play.
1 Select the search method ROUGH SEARCH.
Refer to Selecting the search method on this page.
2 Press and hold c or d to search every 10 track in a disc.
# If a disc contains less than 10 tracks, pressing and holding d recalls the last track of a disc. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, press­ing and holding d recalls the last track of a disc. # If a disc contains less than 10 tracks, pressing and holding c recalls the first track of a disc. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, press­ing and holding c recalls the first track of a disc.
22
En
Built-in CD Player
Section
06
Using disc title functions
You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed.
Entering disc titles
Disc title input lets you input CD titles up to 10 letters long and up to 48 disc titles into this unit.
1 Play a CD that you want to enter the title.
2 Press FUNCTION and hold until TITLE appears in the display.
# When playing a CD TEXT disc, you cannot switch to TITLE. The disc title will have already been recorded on a CD TEXT disc.
3 Press 1 numbered button to select the desired character type.
Press 1 numbered button repeatedly to switch between the following character type: Alphabet (upper case), numbers and symbols Alphabet (lower case)European letters, such as those with accents (e.g. á, à, ä, ç)
# You can select to input numbers and symbols by pressing 2 numbered button.
4 Press a or b to select a letter of the al­phabet.
Each press of a will display a letter of the al­phabet in A B C ... X Y Z, numbers and sym­bols in 1 2 3 ... @ # < order. Each press of b will display a letter in the reverse order, such as Z Y X ... C B A order.
5 Press d to move the cursor to the next character position.
When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display.
6 Move the cursor to the last position by pressing d after entering the title.
When you press d one more time, the entered title is stored in memory.
7 Press BAND to return to the playback display.
Notes
! Titles remain in memory, even after the disc
has been removed from this unit, and are re­called when the disc is reinserted.
! After data for 48 discs has been stored in
memory, data for a new disc will overwrite the oldest one.
! If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
Displaying disc titles
You can display the title of any disc that has had a disc title entered.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings: Play timeDisc Title (disc title)DAB infor­mation (DAB information and play time) When you select Disc Title, the title of the cur­rently playing disc is shown in the display.
# If no title has been entered for the currently playing disc, No Title is displayed. # You can only switch to DAB information when a DAB tuner (GEX-P700DAB) is connected.
English
En
23
Section
06
Built-in CD Player
Using CD TEXT functions
Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artists name and playback time and are called CD TEXT discs. Only these spe­cially encoded CD TEXT discs support the functions listed below.
Displaying titles on CD TEXT discs
% Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings: Play timeDisc Title (disc title)
DiscArtist Name (disc artist name)Track Title (track title)TrackArtist Name
(track artist name)DAB information (DAB information and play time)
# If specific information has not been recorded on a CD TEXT disc, No XXXX will be displayed (e.g., No T-Artist Name). # You can only switch to DAB information when a DAB tuner (GEX-P700DAB) is connected.
Scrolling titles in the display
This unit can display the first 16 letters only of
Disc Title, DiscArtist Name, Track Title and TrackArtist Name. When the recorded infor-
mation is longer than 16 letters, you can scroll the text to the left so that the rest of the title can be seen.
% Press DISPLAY and hold until the title begins to scroll to the left.
The rest of the title will appear in the dis­play.
24
En
MP3/WMA Player
Section
07
Playing a MP3/WMA
1
These are the basic steps necessary to play an MP3/WMA with your built-in CD player. More advanced MP3/WMA operation is explained starting on the next page.
1 MP3/WMA indicator
Shows when the MP3/WMA file is playing.
2 Folder number indicator
Shows the folder number currently playing.
3 Track number indicator
Shows the track (file) currently playing.
4 Play time indicator
Shows the elapsed playing time of the cur­rent track (file).
1 Press OPEN to open the front panel.
CD loading slot appears.
# After a CD-ROM has been inserted, press
SOURCE to select the built-in CD player.
2 Insert a CD-ROM into the CD loading slot.
Playback will automatically start.
2
3
4
CD loading slot
EJECT button
# You can eject a CD-ROM by pressing EJECT. # To avoid a malfunction, make sure that no
metal object comes into contact with the term­inals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 Press a or b to select a folder.
# You cannot select a folder that does not have an MP3/WMA file recorded in it. # To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.
6 To perform fast forward or reverse, press and hold c or d.
# This is fast forward and reverse operation only for the file being played. This operation is can­celed when the previous or next file is reached. # If you select the search method to ROUGH SEARCH, pressing and holding c or d enables you to search every ten track in the cur­rent folder. (Refer to Selecting the search method on page 28.)
English
7 To skip back or forward to another track, press c or d.
Pressing d skips to the start of the next track. Pressing c once skips to the start of the cur­rent track. Pressing again will skip to the pre­vious track.
En
25
Section
07
MP3/WMA Player
Notes
! When playing discs with MP3/WMA files and
audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mode between MP3/WMA and CD-DA with BAND.
! If you have switched between playback of
MP3/WMA files and audio data (CD-DA), play­back starts at the first track on the disc.
! The built-in CD player can play back an MP3/
WMA file recorded on CD-ROM. (Refer to page 56 for files that can be played back.)
! Do not insert anything other than a CD into
the CD loading slot.
! There is sometimes a delay between starting
up playback and the sound being issued. This is particularly the case when playing back multi-session and many folders. When being read in, Format Read is displayed.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again.
! Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)
! When playing back files recorded as VBR
(variable bit rate) files, the play time will not be correctly displayed if fast forward or reverse operations are used.
! If inserted disc contains no files that can be
played back, No Audio is displayed.
! There is no sound on fast forward or reverse. ! If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page
55.
Introduction of advanced built-in CD player (MP3/ WMA) operation
1
1 Function display
Shows the function status.
% Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch be­tween the following functions:
Repeat (repeat play)Random (random play)Scan (scan play)Pause (pause)Folder
title listFF/REV (search method)Tag Read (tag display)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.
Repeating play
For MP3/WMA playback, there are three re­peat play ranges: FOLDER (folder repeat), TRK (one-track repeat) and DISC (repeat all tracks).
1 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the display.
26
En
MP3/WMA Player
Section
07
2 Press c or d to select the repeat range.
Press c or d until the desired repeat range ap­pears in the display.
! FOLDER Repeat the current folder ! TRK Repeat just the current track ! DISC Repeat all tracks
Notes
! If you select other folder during repeat play,
the repeat play range changes to DISC.
! If you perform track search or fast forward/re-
verse during TRK, the repeat play range changes to FOLDER.
! When FOLDER is selected, it is not possible to
play back a subfolder of that folder.
Playing tracks in a random order
Random play lets you play back tracks in a random order within the repeat range,
FOLDER and DISC.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select Random.
Press FUNCTION until Random appears in the display.
Scanning folders and tracks
While you are using FOLDER, the beginning of each track in the selected folder plays for about 10 seconds. When you are using DISC, the beginning of the first track of each folder is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the display.
3 Press a to turn scan play on. Scan : ON appears in the display. The first 10
seconds of each track of the current folder (or the first track of each folder) is played.
4 When you find the desired track (or folder) press b to turn scan play off. Scan :OFF appears in the display. The track (or
folder) will continue to play.
# If the display has automatically returned to the playback display, select Scan again by press­ing FUNCTION.
Note
After track or folder scanning is finished, normal playback of the tracks will begin again.
English
3 Press a to turn random play on. Random : ON appears in the display. Tracks
will play in a random order within the pre­viously selected FOLDER or DISC ranges.
4 Press b to turn random play off. Random :OFF appears in the display. Tracks
will continue to play in order.
Pausing MP3/WMA playback
Pause lets you temporarily stop playback of the MP3/WMA.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the display.
En
27
Section
07
MP3/WMA Player
2 Press a to turn pause on. Pause : ON appears in the display. Play of the
current track pauses.
3 Press b to turn pause off. Pause :OFF appears in the display. Play will re-
sume at the same point that you turned pause on.
Selecting folders from the folder title list
Folder title list lets you see the list of folder ti­tles and select one of them to playback.
1 Press FUNCTION to select folder title list.
Press FUNCTION until Root appears in the display.
2 Press c or d to scroll through the list of titles that have been entered.
# If selected folder contains files, appears in the display.
3 Press a to play your favorite folder title.
That selection will begin to play.
# If selected folder contains no files, NO FILES will be displayed.
Selecting the search method
You can switch the search method between fast forward/reverse and searching every 10 track.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the display.
# If the search method ROUGH SEARCH has been previously selected, ROUGH SEARCH will be displayed.
2 Press c or d to select the search meth­od.
Press c or d until the desired search method appears in the display.
! FF/REV Fast forward and reverse ! ROUGH SEARCH Searching every 10
track
Searching every 10 track in the current folder
If the current folder contains over 10 tracks, you can search every 10 track. When the one folder contains a lot of tracks, you can roughly search the track you want to play.
1 Select the search method ROUGH SEARCH.
Refer to Selecting the search method on this page.
2 Press and hold c or d to search every 10 track in the current folder.
# If the current folder contains less than 10 tracks, pressing and holding d recalls the last track of the folder. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding d recalls the last track of the folder. # If the current folder contains less than 10 tracks, pressing and holding c recalls the first track of the folder. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding c recalls the first track of the folder.
28
En
MP3/WMA Player
Section
07
Switching the tag display
It is possible to turn the tag display on or off, if MP3/WMA disc contains the text information such as track title and artist name. ! If you turn the tag display off, time to play-
back will be shorter than when this func­tion is turned on.
1 Press FUNCTION to select Tag Read.
Press FUNCTION until Tag Read appears in the display.
2 Press a to turn tag display on. Tag Read : ON appears in the display.
3 Press b to turn tag display off. Tag Read :OFF appears in the display.
Note
When you turn the tag display on, this unit re­turns to the beginning of the current track in order to read the text information.
Displaying text information on MP3/WMA disc
Text information recorded on a MP3/WMA disc can be displayed.
# When you have turned tag display off, you cannot switch to Track Title, Artist Name, Album Title and Comment. # If specific information has not been recorded on a MP3/WMA disc, No XXXX will be displayed (e.g., No Album Title). # With some applications used to encode WMA files, album names and other text information may not be correctly displayed. # You can only switch to DAB information when a DAB tuner (GEX-P700DAB) is connected.
Scrolling text information in the display
This unit can display the first 16 letters only of
Folder Name, File Name, Track Title, Artist Name, Album Title and Comment.
When the recorded information is longer than 16 letters, you can scroll the text to the left so that the rest of the text information can be seen.
% Press DISPLAY and hold until the text information begins to scroll to the left.
The rest of the text information will appear in the display.
English
% Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings: Play timeFolder Name (folder name) File Name (file name)Track Title (track title)Artist Name (artist name) Album Title (album title)Comment (com- ment)Bit rateDAB information (DAB infor­mation and play time)
# When playing back files recorded as VBR (variable bit rate) files, the bit rate value is not dis­played even after switching to bit rate.
En
29
Section
08
Multi-CD Player
Playing a CD
2
1
3
You can use this unit to control a multi-CD player, which is sold separately.
These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page.
1 Disc number indicator
Shows the disc currently playing.
2 Track number indicator
Shows the track currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur­rent track.
1 Press SOURCE to select the multi-CD player.
Press SOURCE until you see Multi-CD dis­played.
# You can also sequentially select a disc by pressing a/b.
4 To perform fast forward or reverse, press and hold c or d.
5 To skip back or forward to another track, press c or d.
Pressing d skips to the start of the next track. Pressing c once skips to the start of the cur­rent track. Pressing again will skip to the pre­vious track.
Notes
! When the multi-CD player performs the pre-
paratory operations, Ready is displayed.
! If the multi-CD player does not operate prop-
erly, an error message such as ERROR-11 may be displayed. Refer to the multi-CD player owners manual.
! If there are no discs in the multi-CD player ma-
gazine, No Disc is displayed.
50-disc multi-CD player
Only those functions described in this manual are supported for 50-disc multi-CD players.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the 16 buttons.
For discs located at 1 to 6, press the corre­sponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number ap­pears in the display.
30
En
Loading...
+ 98 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use